How to log in to Wi-Fi on Xiaomi phone: instructions for MIUI 14/15 and problem solving

Connecting to Wi-Fi on Xiaomi smartphones usually does not cause difficulties, but sometimes users face authorization errors, endless receipt. IP-Addresses or sudden connection breaks, especially when you update to MIUI 14/15, where the network settings interface has changed, or when a new device is first turned on, such as the Redmi Note 13 Pro+ or POCO F6. In this article, we will discuss not only the standard method of connection, but also alternative methods (through the use of the Internet). QR-code, WPS), Diagnosing common errors that interfere with authorization.

It is important to consider that the procedure may differ depending on the firmware version and the phone model. 14 Ultra with HyperOS Network Settings menu looks different than Redmi A2 s MIUI 13. We will cover all relevant options, including the features of connecting to hidden networks, corporate Wi-Fi (c) EAP-SIM) If you've tried to connect to the host, but you see a message saying, "Save, protection." WPA/WPA2» without access to the Internet – there is a solution to this situation in the article.

1. Standard way to connect to Wi-Fi on Xiaomi

The most common method is to manually enter network data through the settings menu, and it works on all models, from the budget Redmi to the flagship Xiaomi, regardless of the version of MIUI.

1. Open “Settings” (the gear icon on the desktop or in the application menu).
2. Go to the Wi-Fi section (on some firmwares – Connections → Wi-Fi).
3. Activate the Wi-Fi switch at the top of the screen if it is turned off.
4. In the list of available networks, select the desired one. If it is not available, click Update (round arrow).
5. Enter the password (make sure the register of letters matches!) and click Connect.

If the password is correct, a tick will appear next to the network name, and a Wi-Fi icon will appear in the status bar. On Xiaomi with MIUI 14+, after the first connection, the system can request permission to access the location - this is a requirement of Android for scanning networks.

Name of the network (SSID) written without error|

Password copied/entered without unnecessary spaces |

The router is on and gives a signal (indicators are on) |

On the phone turned on the mode “On the plane” (should be turned off!)

-->

2. Connection through QR-code: fast and error free

If you do not want to manually enter a long password (or are afraid of making a mistake in the register), use authorization by QR-This method is supported by all Xiaomi smartphones on the MIUI 12 and newer, and many modern routers (e.g. Xiaomi Router) AX6000 keenetic).

How it works:

• 📱 On the phone: open Settings → Wi-Fi, click on the three dots in the upper right corner and select Connect on QR-code.
• 🖥️ On the router: find a sticker with QR-code (usually on the bottom panel) or generate it in the router’s web interface (wi-fi section) → QR-code).
• 🔍 Point the phone camera to the code - the connection will happen automatically.

Advantage: Password errors are eliminated, and you can also connect to a network with a hidden SSID (if the router supports QR generation for such networks).However, note that some public access points (in cafes, airports) may block this method due to security policies.

I'm manually entering the password.|

Use it. QR-code|

Through WPS|

Another way.-->

3. Authorization through WPS: pros and cons

WPS (Wi-Fi Protected Setup) is a fast-connection technology without passwords. It works on most routers and is supported by Xiaomi smartphones, but has limitations:

• ✅ Pros: connection in 10 seconds, do not need to know the password.
• ❌ Cons: Not all routers support WPS (especially new models, the method is considered less safe than WPA3.

How to connect via WPS:

1. On the router, press the WPS button (usually marked with the icon of the two arrows forming a circle).
2. On your phone, open Settings → Wi-Fi → Additional → WPS (on some models, the path may differ: Connections → Wi-Fi → WPS button).
3. Wait for the “Connected” message (usually 5–30 seconds).

⚠️ Note: If after pressing WPS If you're on a router, your phone doesn't connect for 2 minutes, try again. C6) turn off WPS 120 seconds for security reasons.

4. Connect to a hidden Wi-Fi network

Hidden SSIDs don't broadcast their name, so they're not visible in the general list. To connect to such a network on Xiaomi, do the following:

1. Open the Settings. → Wi-Fi.
2. Scroll down the list of networks and click Add Network (or Other Networks).
3. Enter: 📡 Name of the network (SSID) — The exact name of the hidden network (taking into account the register!). 🔒 Type of security - usually WPA2-PSK or WPA3-PSK. 🔑 Password - if there is one.

Save.

If the network is not connected, check:

• 🔄 Correctness of the input SSID (Even one extra point or space will prevent the connection).
• 📶 Signal Level – If the router is too far away, the phone may not “see” the hidden network despite manually entering it.
• 🔧 Router settings - some models (e.g, ASUS RT-AX88U) Blocking the connection to hidden networks for unknown devices.

5. Solving authorization errors in Wi-Fi

If your Xiaomi phone doesn’t connect to the network despite the correct password, check out the following:

⚠️ Note: Some Xiaomi firmware (especially custom ones, such as Xiaomi.EU) may not have the option of resetting Wi-Fi settings. → The phone. → Resetting settings → Resetting network settings.

If none of these methods helped, check:

• 🔧 Router mode: Some Xiaomi phones don’t support the outdated standard 802.11b. In the router settings, set the mode 802.11n/ac/ax.
• 📶 Wi-Fi: If the router is running on channel 12-14 (not allowed in all countries), the phone may not see the network.
• 🔄 Software updates: on Xiaomi with MIUI 14 and later, sometimes there are bugs in the Wi-Fi module. Check for updates in Settings → The phone. → Updating the system.

💡

If your phone is connected to Wi-Fi but the internet is not working, try turning it off. IPv6 Some providers (e.g. Rostelecom) are not handling correctly IPv6-mobile traffic.

6. Features of connection to corporate and guest networks

Enterprise networks (in offices, universities) often use advanced authentication protocols such as EAP-SIM, PEAP or TTLS. On Xiaomi, their configuration is different from home Wi-Fi.

1. Select the network in the Wi-Fi list and click Connect.
2. In the field Method EAP Select the authentication type (check with the network administrator: 🏢 PEAP — The most common option for offices. 🎓 TTLS — It is often used in universities. 📱 EAP-SIM — for mobile operators networks (for example, Wi-Fi in MegaFon salons).

• 👤 User name (e.g. ivanov)@company.ru).
• 🔑 Password (may differ from password to Wi-Fi!).
• 🔗 Domain (if required, for example, corp.local).
• Click Connect and confirm the certificate (if you receive a request).

7. Set up Wi-Fi on Xiaomi with HyperOS

In 2026, Xiaomi began the transition to the new HyperOS firmware, which replaced MIUI. The interface of the Wi-Fi settings in it changed, but the functionality remained the same.

• 🔄 New Menu: Wi-Fi section is now in Settings → Connections and sharing.
• 📊 Advanced statistics: HyperOS added a real-time network speed graph (available via tap on the name of the connected network).
• 🔒 Improved security: when you first connect to an open network, the system offers to enable VPN data protection.