Where is the modem on Xiaomi: a complete guide to setting up an access point

You try to distribute the Internet from your Xiaomi to a laptop, tablet or other phone, but you can’t find where the modem modem is turned on? This feature is hidden deeper than it seems — especially after the MIUI updates, when the manufacturer moves menu items. In this article, we will analyze all the ways to activate the access point (via Wi-Fi, USB and Bluetooth), including hidden settings for old and new models of Redmi, POCO and Mi.

It's important to understand that modem modem on Xiaomi can be called differently — "Access Point", "Modem and Access Point", "Modem Mode" or even "Personal Access Point". POCO F5 Or Redmi Note 12, which is so deeply hidden that you can't do without instructions, and we'll show you all the ways, from standard to alternative, including the ones that are not. ADB-Teams for Advanced Users.

1. Standard method: where to look for modem modem in MIUI

On most Xiaomi smartphones (2019-2026), modem modem is in one of three ways.

📱 MIUI 12-14: Settings → Connections and sharing → Access point
🔄 MIUI 11 and older: Settings → Additionally. → Modem mode or Settings → Wireless networks → More. → Access point
🔍 Search by settings: Enter the phrase "access point" or "modem" in the search bar (magnifying glass at the top".

If there is no item at all, it is possible that your operator has blocked the function (relevant for some tariffs of MTS, Beeline or Tele2), in this case, only a call in support or a change in firmware will help.

📊 What kind of smartphone you Xiaomi?

Redmi Note 10/11/12

POCO X3/X4/X5

Mi 11/12/13

Redmi 9/10/13C

Other

On some models (e.g. Redmi A1 or POCO M4 Pro), the section may be called Mobile Access Point and be in the Network and Internet submenu. If you can't see it, try updating the firmware: older versions of MIUI (below 12.5) have a very different interface.

2. Alternative ways of inclusion (if the standard does not work)

If the modem modem is gone after updating or resetting, try these methods:

Through the notification bar: Swipe down from the top edge of the screen and hold your finger on the Mobile Data icon (or "4G/5G"). Some firmware has quick access to the access point.
Voice Assistant: Tell Google Assistant or Yandex Alice, "Enable the hotspot on Xiaomi." This will work if you have the latest version of MIUI installed.
USSD codes: Dial in the phone keyboard ##4636##, then go to Phone Information → Wi-Fi settings. You can force the handout here.

💡

If the access point is turned on, try changing the Wi-Fi range from 2.4 GHz to 5 GHz in the modem settings, which often solves the problem with slow speeds.

On Xiaomi with a pure Android One (e.g. Mi) A2 or Mi A3) The other way: Settings → Network and Internet → Access point and modem. You can also configure it here. USB-Bluetooth modems and modems that are more stable than Wi-Fi in some cases.

3. Access point setting: network name, password and security

Once the modem is activated, you need to configure network settings to avoid connection problems.

🔐 Name of the network (SSID): This is the default model of your phone (for example, "Redmi_Note_12_5G"). It is better to rename it into something simple, without spaces and Cyrillic alphabet.
🔑 Password: Minimum length is 8 characters. Use a combination of letters (WPA2-PSK), numbers and signs to protect against hacking.
📶 Range: Choose 2.4GHz for maximum compatibility or 5GHz for speed (but not all devices support it).
⏱️ Auto-Disable: Disable this option if you want the point to work constantly (relevant for laptop handouts).

Parameter	Recommended value	Why is it important?
Type of security	WPA2-PSK	The most reliable encryption standard for home use.
Wi-Fi channel	Auto or 6 (for 2.4 GHz)	Avoid interference from neighboring networks.
Max. Connections.	8–10	More devices = lower speed for each.
AP-isolation	On.	It prevents devices from “seeing” each other on the network.

On models with MIUI 14 and later, the Access Point settings have introduced the Traffic Saving option, which limits the speed of connected devices, and turn it off if you want maximum performance.

4. modem modem via USB and Bluetooth: when it is needed

Wi-Fi isn't the only way to distribute the Internet, but in some cases it's more convenient to use:

🔌 USB-Modem: Suitable for laptops without Wi-Fi or with a weak signal. Speed is more stable, and the phone's charge is consumed more slowly" → "USB-modem".
🔵 Bluetooth modem: Useful for connecting devices without Wi-Fi (such as some smartwatches or older tablets.

For USB-The modem will require an original cable (or a quality Type-C) if the computer does not recognize the connection:

Install Mi PC Suite drivers from Xiaomi’s official website.
Turn on "Debugging by" USB" In Settings → The phone. → Version. MIUI (Press 7 times, then return to "More" → For developers").
Restart the phone and PC.

What to do if USB-The modem does not work on Windows 11?

Download the Mi PC Suite driver, then in Device Manager, update the driver for the Xiaomi Composite MDB Interface device manually, specifying the folder with the drivers downloaded.

A Bluetooth modem turns on similarly to Wi-Fi, but the speed is limited to ~3 Mbps. This is enough for messengers or mail, but not for streaming video.

Turn on Bluetooth on both devices.
Then, add them to the list (if you need to).
On the receiver phone, select "Connect to access the network".

5. Common Problems and Their Solutions

Even after setting up properly, the modem can malfunction, and here are the typical errors and ways to fix them:

🚫 "Failed to turn on the access point": Check if mobile data is turned on. Reboot the phone. Reset the network settings: Settings → System system → Reset → Resetting Wi-Fi, Mobile Network and Bluetooth.
🐢 Slow speed: Turn off Traffic Savings in the access point settings. Change the range from 2.4 GHz to 5 GHz (or vice versa). Check if your rate limits the speed (call the operator).
🔋 Fast battery discharge: Connect your phone to charge. Reduce screen brightness. Turn off "Wi-Fi Network Search" in the hotspot settings.

Checked balance and tariff operator|Updated firmware to the latest version|Network settings reset|I tried another cable (for the first time). USB-modem)|Tested on another device (laptop/tablet)

-->

If the access point is turned on but the devices are not connected, try:

Remove the saved network on the connected device and connect again.
Change the password to a simpler one (e.g. 12345678) for the test.
Disable VPN or proxy on your phone.

💡

On some Xiaomi models (e.g. Redmi 9A), the modem is blocked by the operator at the firmware level, the only way out is to flash the phone with custom firmware (e.g. LineageOS) or use alternative distribution methods (USB/Bluetooth).

6. Hidden settings: ADB-team-up

If standard methods don't work, you can force modem activation via ADB (Android Debug Bridge), which requires a computer and a little bit of technical skill.

Instructions:

Enable "USB Debugging" (see Section 4).
Connect your phone to your PC and install it. ADB-driver.
Open the command line (Win + R → cmd) and type:

adb shell


settings put global tether_dun_required 0




settings put global mobile_hotspot_active 1

Then restart your phone. The hotspot should work. If you don't, try an alternative command:

adb shell am start -n com.android.settings/.TetherSettings

This method works even on devices blocked by the operator, but requires caution: incorrect commands can disrupt the system.

adb shell settings delete global tether_dun_required


adb shell settings delete global mobile_hotspot_active

7. Features on different Xiaomi models

The manufacturer regularly changes the settings depending on the model and version of MIUI. Here are the current data for popular devices (2020-2026):

Model	MIUI version	The path to modem modem modem	Features
Redmi Note 10/11/12	12.5–14	Settings → Connections → Access Point	Supports Wi-Fi 6 (on the Note 12 Pro+).
POCO X3/X4/X5	13–14	Settings → Network and Internet → Access Point and modem	The POCO X5 Pro has a “Game Mode” option to prioritize traffic.
Mi 11/12/13	13–14	Settings → Connections and Sharing → Modem Modem	Support 5G-modem (if the operator provides the).
Redmi A1/A2	12 (Go Edition)	Settings → Wireless Networks → More → Modem Modem	Limit 5 connections at the same time.

On Xiaomi Black Shark (gaming smartphones), the path may be different: Settings → Network → Access Point. There is also a “Low Latency” option for online gaming, but it increases battery consumption.

If your model is not in the table, use the Settings Search (see Section 1) or check the official documentation on the Xiaomi Support website.

FAQ: Frequent questions about modem modem on Xiaomi

❓ Why does the access point shut down in 5-10 minutes?

This is related to energy saving settings. Turn off Auto Shutdown in the access point menu and add the Settings app to exclude battery optimization: Settings → Battery → Battery Optimization → All applications → Settings (application) → No restrictions.

❓ Can I share the Internet with Xiaomi without a password?

Technically, but it's not safe. In the AP settings, select "No security," but remember: your network will be connected by strangers and traffic will leak. Better use a simple password (e.g. 11111111) and turn off the point when it's not needed.

❓ How to increase the speed of distribution of the Internet?

Try these steps: Change your Wi-Fi range to 5 GHz (if the device supports). Turn off Traffic Savings in the AP settings. Use USB-modem instead of Wi-Fi, it's more stable. Check if your rate is limiting (call the operator).

❓ Why the laptop doesn’t see the access point of Xiaomi?

The reasons can be different: on the laptop turned off the Wi-Fi adapter (check in Device Manager). Too long or complex network name (SSID) — rename it in Latin. Channel conflict — try to manually set channel 6 or 11 in the settings of the point. Antivirus or firewall blocks the connection — temporarily turn them off.

❓ Can I share the Internet with Xiaomi on another Xiaomi?

Yes, but there's a caveat: if both phones are on the same Mi Account, there may be conflicts. To avoid problems: On the phone that distributes the Internet, turn off Data Migration in Settings → About phone → Backup. Use different network names (SSIDs) for the access point. Also make sure that the receiving phone has Flight Mode turned off and Wi-Fi enabled.