LTE Xiaomi Redmi Note 7: Everything you need to know 4G-liaisons in this smartphone

Xiaomi Redmi Note 7

LTE

Redmi Note 7

Many users are confused LTE s 3G or 5G, We don't understand the differences in speed, coverage and power consumption. In this article, we'll go into detail about how it works. 4G-Xiaomi Redmi Note 7, what frequency ranges the model supports, how to check the current connection and fix the typical problems - from lack of network to slow Internet" LTE How to fix it without going to the service center.

What is LTE and how it differs from 3G/5G in Xiaomi Redmi Note 7

LTE (Long-Term Evolution) is a fourth-generation (4G) wireless standard that delivers data rates of up to 150 Mbps in theory and 30-80 Mbps in practice. The Xiaomi Redmi Note 7 uses a modification of the LTE Cat. 12 that supports frequency aggregation (merging multiple bands to increase speed).

For comparison:

  • πŸ“‘ 3G (UMTS/HSPA+): maximum 42 Mbps, high latency (ping), quickly drains the battery when used.
  • πŸš€ LTE (4G): Up to 150 Mbps, low ping (ideal for online gaming and video calling), more energy efficient.
  • ⚑ 5G: theoretically up to 1-10 Gbps, but Redmi Note 7 does not support it (this is the prerogative of the flagships Xiaomi 2020).+ year-end).

It is important to understand that the real speed depends not only on the smartphone, but also on the operator, the load of the base station, weather conditions and even the thickness of the walls in the room. For example, in the center of Moscow, the Redmi Note 7 can show 70-90 Mbps on LTE, and in rural areas – barely reach 10-15 Mbps.

The Redmi Note 7 uses the Qualcomm Snapdragon 660 chipset, which supports:

  • πŸ“Ά LTE FDD: ranges 1, 3, 5, 7, 8 (most common in Russia and Europe).
  • 🌍 LTE TDD: ranges 38, 40, 41 (used in Asia, for example, in China).
  • πŸ”„ Carrier Aggregation: Combining multiple bands to increase speed.
πŸ“Š Which mobile internet do you use more often?
LTE only (4G)
3G (if 4G is not available)
Switching automatically.
I only use Wi-Fi.

What LTE ranges supports Xiaomi Redmi Note 7: the full list

The ranges supported will determine whether your Redmi Note 7 will catch 4G in a particular region. In Russia, the main operators (MTS, Beeline, MegaFon, Tele2) use the B1 bands (2100 MHz), B3 (1800 MHz), B7 (2600 MHz) and B20 (800 MHz), the latter especially important for coverage in rural areas and inside buildings.

Here is the full list of supported Xiaomi Redmi Note 7 LTE bands:

Range (Band)Frequency (MHz)Region of utilizationNotes
B12100Russia, Europe, AsiaBasic range for urban areas
B31800Russia, EuropeOften used to extend the coverage
B5850United States, Latin AmericaIt is rare to occur in Russia.
B72600Russia, EuropeHigh speed, but weak penetration through walls
B8900Russia, EuropeGood coverage in rural areas
B20800Russia, EuropeCritical for stable 4G in the outback and indoors

If your smartphone is not catching 4G in some region, check if the local operator supports at least one of the listed ranges. For example, in Crimea and some regions of the Far East, non-standard frequencies that are not included in the Redmi Note 7 list can be used.

⚠️ Note: If you are buying the Xiaomi Redmi Note 7 for use abroad (such as in the US or Japan), please note that ranges may apply there. B4, B12 or B17, Check compatibility on the operator's website before buying.

How to check if LTE works on Xiaomi Redmi Note 7

If you’re not sure if your smartphone is connected to a 4G network, there are a few ways to check it out:

  1. Notification Panel: Swipe down from the top of the screen. The status bar should show a 4G or LTE icon (sometimes 4G+ if frequency aggregation is enabled). If it has 3G, H+ or E, the network is running in outdated mode.
  2. Network settings: Go to Settings β†’ SIM-maps and mobile networks β†’ Name of the access point (APN). Here you should select your operator profile (for example, Internet.mts.ru for MTS).
  3. Speed test: Install Ookla's Speedtest app and run the check. If you're speeding above 20 Mbps, you're exactly connected to LTE.

If there is a 4G icon but the speed is low (less than 10 Mbps), the problem may be:

  • πŸ“Ά Weak signal (check the number of "sticks" of the network indicator).
  • πŸ”„ Overloaded tower (especially during rush hour).
  • πŸ“± Incorrect settings APN (more about this in the next section).

πŸ’‘

If you see the option "Only" in the network settings 4G (LTE)", But it's inactive, so it's yours. SIM-The card does not support this standard. USIM (4G-map).

Step-by-step setting up LTE on Xiaomi Redmi Note 7

If 4G is not working or is not working properly, follow this guideline:

  1. Check it out. SIM-Card: Make sure you have USIM-map (supports) 4G). Old ones. SIM (2G/3G) They won't be able to connect to LTE. If you are not sure, visit the salon - will be replaced for free 5 minute.

Set up your preferred network type:

  1. Go to Settings. β†’ SIM-maps and mobile networks.
  2. Choose yours. SIM-card (if two of them).
  3. Click Network Type and install 4G (preferably) or 4G only.
  4. Update your APN settings: In the same menu, select Access Point Name (APN). Click on the three dots in the upper right corner and select Reset to default values. If that doesn't help, enter the settings manually (the data can be found on your carrier's website).

SIM-card 4G (USIM)|Settings have been selected "4G (preferably)"|APN reset to factory settings|The operator's coverage area is 4G (check on the coverage map)-->

If you haven’t had 4G yet, try it:

  • πŸ”„ Reboot your smartphone (sometimes resetting the communication module helps).
  • πŸ“² Update: Go to Settings β†’ The phone. β†’ Updating the system.
  • πŸ› οΈ Reset network settings: Settings β†’ System system β†’ Resetting settings β†’ Resetting network settings.

⚠️ Note: If after resetting the network, not only 4G, But also the communication in general, check if the flight mode is activated automatically. SIM-There is no dust or damage (especially if you recently dropped your smartphone).

Typical LTE issues on Xiaomi Redmi Note 7 and their solutions

Even after setting up correctly, Redmi Note 7 users may face problems. 4G-Let's look at the most common links:

1.There is a 4G badge, but the internet is not working

Reasons:

  • πŸ’³ End of traffic or blocked access to the Internet (check the balance through the USSD-For example, *100# for MTS).
  • πŸ”§ Wrong settings APN (Even if you reset them, the operator could update the settings).
  • πŸ›‘οΈ Firewall Blocking: Some apps (like AdGuard or NetGuard) can block mobile traffic.

2. 4G is constantly switching to 3G

Possible solutions:

  • πŸ“Ά Turn off automatic switching: in network settings, select Only 4G (But keep in mind that in areas without coverage, communication will disappear completely).
  • πŸ”‹ Battery problem: if the battery is badly worn out, the smartphone can forcefully reduce power consumption by turning off LTE. Check the battery health in Settings β†’ Battery. β†’ Battery status.
  • πŸ“‘ Weak signal: Try using a repeater or move closer to the window.

3. Low LTE speed (less than 10 Mbit/s)

What to do:

  • πŸ•’ Check the time: speed may fall during rush hour (18:00–23:00).
  • πŸ“Š Change range: Some operators allow you to manually select the frequency (e.g, B20 often less busy than B3).
  • πŸ”„ Reconnect to the network: turn on Flight Mode for 30 seconds, then turn off.
How to forcely select LTE range?
The Xiaomi Redmi Note 7 doesn’t have a built-in option for manual frequency selection, but you can use the engineering menu: 1. Open the Phone app and dial ##4636##. 2. Select Phone Information. 3. Scroll down to Install your preferred network type and experiment with options (e.g, LTE only). ⚠️ Caution: Incorrect settings can lead to loss of communication!

How to enhance the LTE signal Xiaomi Redmi Note 7

If you have a weak 4G coverage in your area, you can try to improve the signal without buying additional hardware:

  1. Update your firmware: Manufacturers regularly optimize modems. Check the relevance of the software in Settings β†’ About Phone β†’ System Update.
  2. Use an external antenna: Some cases for the Redmi Note 7 have built-in antenna amplifiers, and you can also connect an external antenna via an adapter (but this requires parsing the smartphone).
  3. Turn off battery savings: Charge Saving or Ultrasaving modems may limit modem operation. Turn them off in Settings β†’ Battery.
  4. Change location: Even moving 1-2 meters closer to a window or to another floor can significantly improve the signal.

If nothing helps, consider buying. LTE-For the Redmi Note 7, models with support for ranges will be suitable B3, B7 and B20.

πŸ’‘

The most effective way to improve LTE signal is to use the B20 (800 MHz) band, which is better at penetrating obstacles. Check with the operator if it is available in your area.

Comparison of LTE in Xiaomi Redmi Note 7 and other Xiaomi models

Xiaomi Redmi Note 7 is equipped with a modem Snapdragon X12, which provides speeds up to 600 Mbps in theory (with aggregation of three bands). However, in practice, the maximum speed rarely exceeds 100-120 Mbps due to operator restrictions.

For comparison, here’s how things are with LTE in other popular Xiaomi models:

ModelChipsetMax. speed LTE (Mbit / s)Support for B20 (800 MHz)Frequency aggregation
Redmi Note 7Snapdragon 660600 (theory) / 100 (practice)βœ… Yes.βœ… 2CC
Redmi Note 8Snapdragon 665800 / 120βœ… Yes.βœ… 3CC
Redmi Note 9Mediatek Helio G85300 / 80βœ… Yes.❌ No.
Poco X3 NFCSnapdragon 732G800 / 150βœ… Yes.βœ… 3CC

As you can see, the Redmi Note 7 isn’t the most advanced smartphone in terms of LTE, but it’s a good option for comfortable use in 2026.If you want a faster speed, look for models with Snapdragon 7xx or 8xx (like the Poco F3 or Xiaomi 11T).

FAQ: Frequent questions about LTE Xiaomi Redmi Note 7

My Redmi Note 7 doesn't catch 4G, though SIM-card LTE. What's the matter?
The problem might be in: πŸ“Ά Network settings: check what network type is selected 4G (preferably). πŸ”§ APN: Reset the access point settings or enter them manually (the data is on the operator’s website). πŸ“± Software failure: update the firmware or reset network settings. πŸ› οΈ Hardware malfunction: If nothing helps, the modem may be damaged (repair required).
How do I know which LTE band my Redmi Note 7 is using?
Install the NetMonster or LTE Discovery app from Google Play. They show: Current range (like B3), signal level in dBm (the closer to -70, the better), download/return speed. You can also use the engineering menu (#4636###), but there the data is less visual.
Is LTE really faster to burn battery than 3G?
Yes, but not much. The difference is minimal in standby mode, but when used actively (file downloads, video streaming), LTE can consume 10-15% more power than 3G. However, this is offset by speed: tasks are performed faster, and the modem goes to sleep earlier. Tip: if the battery drains too quickly, check the applications in Settings β†’ Battery β†’ Battery Use. It may not be LTE, but the background activity of messengers or social networks.
Can Redmi Note 7 enable VoLTE (LTE calls)?
Xiaomi Redmi Note 7 supports VoLTE (voices on the phone) LTE), But the function depends on: πŸ“± Firmware versions: Update MIUI last-minute. πŸ“ž Operator: not all Russian operators support VoLTE (for 2026, this is done by MTS, Beeline and Tele2 in limited regions). πŸ”§ Settings: Enable the option in Settings β†’ SIM-maps and mobile networks β†’ Challenge LTE. If the option is not on the menu, your operator does not support it.
Will I be receiving updates for LTE-modem in Redmi Note 7?
Xiaomi periodically releases updates for modems (they are part of the general updates). MIUI). However, since 2022, the Redmi Note 7 has not officially received major updates (end of support: βœ… Security fixes may still be released (but rarely). ❌ New functions LTE (For example, support for additional ranges will not be added. πŸ”„ Modem updates are possible, but unlikely. LTE, Consider switching to a newer model (e.g. Redmi Note 12).