How to connect Xiaomi Dual Mode Wireless Mouse Silent Edition: Full Instruction

Xiaomi Dual Mode Wireless Mouse Silent Edition has become a popular choice among users who appreciate silence and versatility. This model supports two connection modes – via Bluetooth 5.0 and 2.4 GHz. USB-It's a receiver that makes it compatible with almost any device, from Windows PCs to MacBooks to even some Android tablets, but many people have difficulty connecting for the first time, especially if it's switching between modes or pairing with multiple gadgets at the same time.

In this article, we will examine not only the standard connection procedure, but also the nuances that the manufacturer does not mention in the official instructions, for example, why the mouse can not be detected via Bluetooth on older laptops or how to reset the settings if the device has forgotten the receiver.

If you bought the Silent Edition of this model, it's important to remember that its silent buttons require slightly different sensitivity calibration in drivers than the standard version, which affects the pairing process, especially on macOS. Next is a detailed guide with illustrations of key steps and solutions to common errors.

Technical characteristics and compatibility of the mouse

Before connecting, make sure your device supports the chosen connection mode. Xiaomi Dual Mode Wireless Mouse Silent Edition has the following key options:

• 🔗 Two modes of connection: Bluetooth 5.0 (low power consumption) and 2.4 GHz (minimum latency)
• 🖱️ Sensor: Optical, resolution up to 1200 DPI (regulated)
• 🔋 Battery: built-in battery 500 mAh, charging on USB-C
• 🤫 Noise level: <20 dB (due to silent microswitches)
• 💻 Compatibility: Windows 7/8/10/11, macOS 10.12+, Linux (with the kernel) 4.4+), Android 8.0+ (Bluetooth only)

Important: the mouse supports Android, on smartphones it will only work in Bluetooth mode, since the USB receiver requires a full-size USB-A port. Also on devices with macOS, you may need to manually install the driver for the correct operation of the scroll wheel.

Note that if your PC or laptop is released before 2016, the built-in Bluetooth module may be 4.0 or lower, in which case the mouse will connect, but there may be ping problems (delays) or spontaneous connection breaks. USB-receiver or update Bluetooth adapter.

Connection through USB-receiver (2.4 GHz)

This method provides minimal latency and maximum connection stability, suitable for gamers, designers or those who work with graphic editors, where cursor accuracy is important.

Instructions:

1. Insert the USB receiver (the small black adapter from the kit) into the free USB-A port on your device. Use the port on the back of the system unit so that the signal will be more stable.
2. Turn on the mouse by switching the switch on the bottom panel to the ON position (the blue indicator should light up).
3. Press and hold the Mode button (near the power switch) for 3 seconds until the indicator blinks quickly, which means that the mouse is looking for a receiver.
4. Wait 5-10 seconds, the connection will be established automatically, the indicator will stop flashing and will burn with even light.

If the mouse doesn't connect:

• 🔌 Check that the receiver is inserted directly into the port, not through the port. USB-hub.
• 🔄 Reboot the mouse by turning it off and turning it on again.
• 🖥️ On Windows, try updating the receiver driver through Device Manager (section "Mice and other pointing devices").

USB receiver inserted into USB-A| port

Mouse on (blue light) |

Mode button is pressed to search for receiver |

Port port USB Not overloaded by other devices-->

⚠️ Note: If you are using a mouse with macOS, USB-The receiver may not be able to decide due to the lack of native drivers, in which case you will have to download the utility. USB Overdrive or switch to Bluetooth.

Connection via Bluetooth

Bluetooth mode is convenient for connecting to laptops, tablets or smartphones where there are no free USB-However, it has limitations: for example, on Windows 10, the mouse may not be able to handle gestures properly (e.g., horizontal scrolling).

Step-by-step instructions for different OSes:

Windows 10/11

1. Turn on Bluetooth on PC: Start → Settings → Devices → Bluetooth and other devices.
2. Activate the mouse (switch to ON) and press the Mode button once. The indicator should flash blue and red alternately - this means the mouse is in search mode.
3. In the list of available devices, select Mi Dual Mode Mouse and click Connect.
4. If you have a request for input PIN-Leave the field empty and press "Connect" again.

macOS

1. Open System settings → Bluetooth.
2. Hold the Mode button on your mouse for 5 seconds until the indicator flashes red.
3. Xiaomi BT Mouse will appear in the list of devices - select it and confirm the pairing.

On Linux (Ubuntu/Debian), you may need to install the bluez package:

sudo apt update && sudo apt install bluez bluez-tools

Then restart the Bluetooth service:

sudo systemctl restart bluetooth

Repeat the pairing via Bluetooth Manager.

⚠️ Note: Some laptops with Intel AX200 With a Bluetooth module, a mouse can connect with a delay of up to 30 seconds, and this is due to the energy-saving settings of the adapter. The solution is to disable the setting "Allow the computer to turn off this device to save energy" in the properties of the Bluetooth adapter (Device Manager).

Switching between 2.4GHz and Bluetooth modes

One of the key features of the Dual Mode Wireless Mouse is the ability to quickly switch between two types of connection, but many users find that the mouse forgets one of the modes after switching.

Correct switching algorithm:

1. If the mouse is connected at 2.4 GHz and you want to switch to Bluetooth: USB-Receiver from port. Press the Mode button once, the indicator will flash blue and red. Connect the mouse via Bluetooth, as described in the previous section.

Bluetooth

2.4 GHz

• Turn it on. USB-port-port.
• Press and hold the Mode button for 3 seconds until the indicator flashes blue quickly.
• The connection will be automatically installed within 10 seconds.

Once reset, you'll have to reconnect the mouse to all your devices, and if you've used it with macOS, remember to remove the old device from the Bluetooth list before pairing again:

System settings → Bluetooth → [Him on the mouse] → Button ×" (delete)

⚠️ Note: Reset does not affect settings DPI or button sensitivity, which is stored in the mouse memory, but if you use Xiaomi Mouse Driver proprietary software, you'll have to reinstall it after you reset it.

Solving common problems

Even after connecting correctly, users encounter common errors, and here are the most common ones and how to fix them:

If the mouse does not turn on at all, check:

• 🔋 Battery charge (the indicator must light up when connected to charging).
• 🔌 Integrity of cable USB-C (Try another cable).
• 🛠️ Battery contacts (if removable) - they could oxidize.

To diagnose the connection on Windows, you can use the Xiaomi Bluetooth Tool (unofficial, but proven):

https://github.com/ysc3839/XiaomiBluetoothTool

It shows detailed pairing logs and helps to identify at which stage the failure occurs.

💡

If the mouse is not connected via Bluetooth or 2.4 GHz, try resetting the mouse first, and then check the compatibility of your PC’s Bluetooth adapter. 90% of the time, the problem is an outdated driver or device conflict.

Optimizing the mouse operation

Once you've successfully connected, you should customize your mouse to suit your needs, and here are some tips for different scenarios:

For office work

• 📊 Reduce. DPI up to 800-1000 for precise cursor positioning (set up in Xiaomi proprietary software).
• 🔇 Turn off button sounds in Windows settings (Settings) → Devices → Mouse. → Additional Mouse Parameters → Sounds).
• ⚡ Turn on power saving mode in the mouse if you work from a laptop battery.

For games or graphics

• 🎮 Set the maximum. DPI (1200) and disable pointer acceleration in Windows: Control Panel → Equipment and sound → Mouse. → Index parameters → Remove the tick "Improving the accuracy of the pointer installation"
• 🖱️ Use 2.4GHz mode for minimal latency.
• 🔄 Configure side buttons on macros with X-Mouse Button Control.