How to turn on Xiaomi smartphone: from standard launch to emergency methods

Xiaomi smartphones are some of the most popular devices on the market due to their combination of price, performance and functionality. However, even with such reliable gadgets, sometimes there are situations when the phone refuses to turn on. The reasons can be different from banal battery discharge to software failures or hardware malfunctions. In this article, we will discuss all possible ways to turn on a Xiaomi smartphone, from standard procedure to emergency methods for “dead” devices.

It's important to understand that the algorithm of actions depends on the condition of the phone. If the screen is completely black and does not respond to buttons, this can mean both deep discharge and serious breakdown. If the phone vibrates but does not load beyond the Mi logo, the problem is likely software. We will consider both scenarios, and also give recommendations for fault diagnosis. Particular attention to models with a fixed battery (for example, the Redmi Note 12 or Xiaomi 13), where traditional methods may not work.

Before you start active actions, check the obvious things: whether the charging cable is leaving, whether the connector is damaged. USB-C, Sometimes the problem is the little things that get overlooked in the panic, and if you're sure everything's okay, read on.

1. Standard inclusion: power button and its features

The most obvious way is to hold the power button, but even here there are nuances that many people are not aware of. On most Xiaomi models (including Redmi, Poco and Mi), the power button performs several functions depending on the duration of the press:

• 🔘 Short press (1 second) – lock/unlock the screen.
• 🔋 Long pressing (3-5 seconds – on/off the phone.
• 🔄 Excessive pressing (10)+ Seconds – Forced reboot (works even on a got stuck device).

If the phone is low to zero, the standard press may not work.

1. Connect the original charging cable (preferably from Xiaomi with Quick Charge support).
2. Wait a minute. 15-20 minutes – even if the indicator does not burn, the battery can start charging.
3. Try to hold the power button. 10-15 Seconds (sometimes it takes several attempts).

On some models (e.g. Xiaomi) 12T or Redmi K50) The power button is paired with a fingerprint sensor, and if the sensor is contaminated or damaged, it can interfere with normal operation.

2.What to do if Xiaomi does not respond to the power button

If the phone doesn't show signs of life even after a long charge, the reasons could be more serious.

Pay special attention to models with built-in battery (for example, Xiaomi 13 Pro or Redmi Note 11 Pro).+). They often have a problem of "deep discharge", where the power controller blocks charging until the battery receives an initial current:

⚠️ Note: Do not use a "frog" for forced charging on models with USB-C — This can damage the power controller, and it's better to use the original Quick Charge 4 charger.+.

If the phone has fallen or got wet before, there is a high probability of hardware damage, in which case, self-attempting to turn on can aggravate the problem, it is better to contact the Xiaomi service center or a proven wizard immediately.

3. Forced reset: when and how to do it

Forced reboot (also known as hard reset) helps when the phone is stuck on the logo, does not respond to touch, or is unstable, a method that is data-safe because it does not erase information from the device, but should not be abused — frequent forced reboots can damage the file system.

Instructions for most Xiaomi models (including Redmi, Poco and Mi):

1. Turn off the phone from charging (if connected).
2. Press and hold the power button and the volume button at the same time.
3. Hold them for 10-15 seconds until the screen goes out and the phone vibrates.
4. Release the buttons – the device should start restarting.

On some models (such as the Black Shark or the old Mi), the combination may be different.

• 🔄 Nutrition + Loudness down (hold 10 seconds).
• 🔄 Nutrition + Loudness up + Loudness down (for Black Shark) 4/5).

If the phone is stuck on the logo again after a forced reboot, this may indicate firmware damage, in which case you will need to flash it through Fastboot or Recovery (more about this in the next section).

Turn off the charger |

Check that the buttons are not stuck |

Hold the combination for at least 10 seconds|

Do not release the buttons before the phone vibrates.-->

4 Enter Fastboot and Recovery Modes: When You Need It

Fastboot and Recovery modes are utility tools that help restore the phone to work in cases where standard methods don't work.

• 📱 The phone is stuck on startup the Mi logo and does not load any further.
• 🔄 There was a failure after the firmware update.
• 🔧 You need to reset to factory settings (for example, if you forget the pattern lock).

To log into Fastboot (mode for firmware and recovery):

1. Turn off the phone (if it is on, hold the power button until it is turned off).
2. Squeeze the power. + Volume down and hold until a screen with a hare in a hat-eared (Fastboot logo) appears).

To log in to Recovery (Recovery Mode):

1. Turn off the phone.
2. Press Power + Volume up and hold until the Mi Recovery menu appears.

In the Recovery menu, you can:

• 🔄 Reboot the phone (Reboot).
• 🗃️ Reset the settings to factory (Wipe Data).
• 📥 Update from the memory card (Apply update from the memory card) SD card).

⚠️ Note: Wipe Data option in Recovery will completely delete all data from the phone, including photos, contacts and applications. If the device is synced with Mi Account, some data (contacts, notes) can be restored after reset.

If the phone doesn’t respond to the button combinations to log in to Fastboot or Recovery, it could mean:

• 🔋 Full battery discharge (charge your phone) 15-20 minute).
• 🛠️ Hardware button failure (try pressing harder or at different points).
• 💻 Damage to the loader (will require firmware through EDL service).

5.Including Xiaomi after deep discharge: features and risks

Deep discharge is one of the most common reasons Xiaomi refuses to turn on. Modern lithium polymer batteries are afraid of completely discharging, and if the phone has been off for a long time, the power controller can block charging, in which case standard methods will not work.

Here's what we can do:

1. Use the original Quick Charge-enabled charger (such as the Xiaomi or Redmi bundle) Charging from other brands may not provide enough current to "wake up" the battery.
2. Connect the phone to the charger and leave it on 1-2 Even if the indicator is not on, sometimes it takes up to an hour. 30 minutes for the power controller to start responding.
3. Try the "battery trick" (only for removable battery models, such as Redmi). 4A or Redmi 5A):

If the phone still does not respond, you can try the method of "double charging":

• 🔌 Connect your phone to charging through USB-C.
• 🔌 Connect the second charger wirelessly at the same time (if the model supports, for example, Xiaomi 13 or Mi 11).
• 🕒 Wait. 20-30 minutes and try to turn on.

⚠️ Warning: If the phone is turned on after a deep discharge, but quickly discharges or turns off, this may indicate battery degradation. In this case, it is recommended to replace the battery in the service center, as further use can lead to a sudden shutdown or even bloating of the battery.

On some models (e.g. Poco) F3 or Redmi K40) After a deep discharge, it may be necessary to calibrate the battery:

1. Charge your phone to 100% without interruption.
2. Turn off the charging and let the phone discharge before automatically turning off.
3. Repeat the charging-discharge cycle 2-3 times.

6.Enable Xiaomi after updating or resetting settings

Sometimes the phone refuses to turn on after updating the firmware or resetting settings.

• 📦 Incomplete download of update files.
• 🔄 Data conflict after reset.
• 🛠️ Errors in the firmware itself (especially relevant for betta versions) MIUI).

If the phone is on the Mi screen after the update:

1. Wait. 15-20 Minutes – sometimes the first download after the update takes a long time.
2. If the screen does not change, perform a forced reboot (see Section 3).
3. If the phone is back on the logo, log in to Recovery and select Wipe Cache Partition (this won’t delete your data, but will clear the system’s cache).

If the problem occurs after resetting the settings:

• 🔄 Make sure the phone is at least 50% charged – a low charge reset can result in a boot cycle.
• 📱 If your phone asks you to enter your Mi Account after resetting, but you don’t remember it, use the password recovery function on account.xiaomi.com.
• 🛠️ If the reset is interrupted and the phone is not turned on, try repeating the procedure via Fastboot using the Mi Flash Tool.

For models with an unlocked bootloader (for example, after installing custom firmware), it may be necessary to re-unblock.

1. Enter Fastboot (Food + Volume Down).
2. Connect your phone to your PC and start the Mi Unlock Tool.
3. Follow the instructions of the program to unlock.

7 Hardware malfunctions: when without service can not do

If none of these methods worked, there is a high probability of hardware failure, and here are the signs for which you should contact the service center:

• 🔥 The phone warms up when charging or when off.
• 💧 There are traces of fluid on the phone (even if it turned on afterward).
• 🔌 Connector. USB-C staggered.
• 📉 The phone turns on but immediately turns off (cyclical reboot).
• 🔋 The battery is swelling (this can be seen by the raised back cover or screen).

Some malfunctions can be diagnosed independently:

If you suspect a hardware malfunction, but the phone still turns on at least for a short time, do the following:

1. Immediately back up important data (photos, contacts) via Mi Cloud or by connecting your phone to your PC.
2. Write it down. IMEI phone (dial *#06# in the dialer) - it will be needed for warranty repair.
3. Don’t try to disassemble the phone yourself – it may take away your warranty.

For Xiaomi and Redmi models with a valid warranty, repairs at official service centers are usually free, unless the malfunction is caused by mechanical damage. To find the nearest service, use the official service.xiaomi.com website.

💡

If the phone doesn't turn on after falling or getting moisture, don't try to charge it - it can cause a short circuit.

8. Prevention of inclusion problems: how to avoid breakdowns

Many problems with the inclusion of Xiaomi smartphones can be prevented if you follow simple recommendations:

• 🔋 Do not allow a deep discharge – charge your phone at battery level 10-15%. Modern batteries do not like full discharge.
• 🔌 Use original or certified chargers. Cheap cables can damage the power controller.
• 📱 Regularly update the firmware through Settings → The phone. → System Update: Updates often contain fixes for critical errors.
• 🛡️ Don't install custom firmware unless you're sure you're doing it. It can lead to your phone getting "bricked.
• 💦 Avoid moisture, even if the phone is protected. IP53 (Like the Redmi Note 11, this does not guarantee complete water resistance.

Pay special attention to the battery:

• 🔋 Don’t leave your phone on charge all night – it shortens battery life.
• 🌡️ Avoid overheating (do not leave your phone in direct sunlight or in your car in the summer).
• 📉 If you notice that the phone has become quickly discharged, check the status of the battery through Settings. → Battery. → Battery status.

It is also useful to know the hot keys for emergency situations:

• Nutrition + Volume up - Entrance to Recovery.
• Nutrition + Volume down - entrance to Fastboot.
• #4636## is a service menu for diagnosis.

If you experience frequent freezes, install the Mi Diagnostic app from Google Play, which will help you identify hardware or software problems early on.

💡

To extend the life of the battery, turn on the "Optimized Charging" mode in the settings (Settings) → Battery. → Optimized charging. It will limit the charge to 80%, which will reduce battery wear.

FAQ: Frequent questions about the inclusion of Xiaomi smartphones