How to turn on Xiaomi Redmi Note 10 Pro: all the ways from forced reboot to recovery after the “brick”

Xiaomi Redmi Note 10 Pro

In this article, we will look at all possible ways to turn on the Redmi Note 10 Pro, from basic (charging, forced reboot) to advanced (Fastboot mode, flashing through EDL). Special attention will be paid to diagnosing why the smartphone may not turn on, and give a checklist for self-checking. If your device “bricked” after a failed update or became “dead” after a fall, here you will find step-by-step instructions with photos and videos.

This article is relevant for all modifications of the Redmi Note 10 Pro:

• 📱 Global version (M2101K6G, M2101K6I)
• 📱 Chinese version (M2101K6C)
• 📱 Indian version (M2101K6P, M2101K6R)

If your model is different, check its code (you can find it under the removable lid or in the documentation) and check the compatibility table below.

1. Basic ways of turning on: charging and power button

Before you panic and carry your phone for repair, check out three key points that are often overlooked:

✅ Battery charging. Redmi Note 10 Pro may not turn on if the battery is completely discharged. Connect the original cable and power supply (at least power) 18W) And leave it on charge for at least 30 minutes:

• 🔌 The charging indicator should catch fire after 5-10 minutes (unless the battery is damaged).
• ⚡ Use only the original cable – cheap analogues may not transmit enough current to run.
• 🔋 Try another charger if the indicator is not on.

✅ Forced reset: If your smartphone is stuck on the Xiaomi logo or the screen is black but it is reactive to charging, do a hard reset:

1. Press the Power + Volume button for 10-15 seconds.
2. Release the buttons when the Redmi logo or vibration appears.

This method works in 60% of cases of freeze after updating or installing applications.

✅ Check the display. Sometimes the smartphone turns on, but the screen stays black because of damage to the plume or the matrix:

• 📞 Call your phone from another device – if you hear the call sound, the problem is in the display.
• 🔦 Light a flashlight on the screen at an angle - maybe the image is, but the backlight does not work.

⚠️ Warning: If the indicator does not light up after charging for an hour and the phone does not respond to buttons, this may indicate a malfunction of the power controller or battery.

2.Inclusion through Recovery mode: reset and diagnosis

If the basic methods don't work, the next step is to start in recovery mode.

• 🔄 Smartphone stuck on the logo MIUI.
• 📱 The screen flashes or shows an error "No command".
• 🔧 We need to reset the settings to the factory.

How to log in to Recovery on Redmi Note 10 Pro:

1. Turn off the phone (if it freezes, perform a forced reboot, as in the previous section).
2. Press Power + Volume Up and hold until a menu with the Mi Bunny logo appears.
3. Use volume buttons for navigation and power for selection.

The Recovery menu has options:

Important: Wipe Data removes all data, including photos, contacts and apps. If your phone had important files, try other methods first or retrieve data via Fastboot (more on this in the next section).

⚠️ Note: If the Recovery menu shows an error "This" MIUI version cannot be installed on this device, which means that the firmware is damaged, in which case only flashing through Fastboot or Fastboot will help. EDL.

Try to reboot your phone as normal | Check battery power (minimum 30%)|Save important data (if the phone is sometimes turned on)|Prepare a Mi Account to unlock after reset-->

3. Including via Fastboot: for power users

Fastboot mode is an emergency bootloader mode that allows you to control your smartphone through your computer, and you need it if you:

• 🔧 The phone doesn’t even load in Recovery.
• 📱 You need to reflash the device through the Mi Flash Tool.
• 🔓 You need to unlock the bootloader (Bootloader).

How to Sign In to Fastboot on Redmi Note 10 Pro:

1. Turn off the phone.
2. Press the power + Volume reduction for 5-10 seconds.
3. Release the buttons when the image of the hare in the hat-eared (Fastboot Bunny) appears.

What can you do in Fastboot:

• 🖥️ Flash your phone through the Mi Flash Tool (requires an unlocked bootloader).
• 🔄 Install custom recovery (for example, TWRP).
• 📡 Check the connection with the PC command: fastboot devices (should display the serial number of the device).

Step-by-step instructions for firmware through Fastboot:

1. Download the firmware for your model from the official Xiaomi website (choose the Fastboot version).
2. Unpack the archive in a folder on your PC.
3. Connect your phone to your computer via USB (use the original cable!).
4. Launch the Mi Flash Tool, select the firmware folder and click Refresh → Flash.

⚠️ Note: Firmware through Fastboot without unlocking the bootloader will lead to an “Anti-Rollback” error and a complete lock of the phone.

Enable the "dead" phone via EDL mode (9008)

If the Redmi Note 10 Pro doesn’t respond to buttons, is not charged or is detected by a computer, then the last chance is EDL (Emergency Download Mode), a “hidden” firmware mode that works even when the bootloader is damaged.

Signs that an EDL is needed:

• 💀 The phone does not turn on, does not vibrate, does not burn the charging indicator.
• 🔌 The computer makes the connection sound USB-The device does not define the model.
• 📱 There is no reaction on the screen (even after a long charge).

How to log into EDL:

1. Turn off the phone (if it was turned on).
2. Press Power + Volume + Volume + Volume decrease at the same time.
3. Connect. USB-cable to PC (the phone must be defined as Qualcomm) HS-USB QDLoader 9008).

Firmware via EDL:

• 🖥️ Download the firmware in.mbn format for your model (for example, sweet_global_images_... For the Redmi Note 10 Pro).
• 🛠️ Use the Mi Flash Tool or QFil tool for firmware.
• ⚠️ Note: Incorrect Firmware in the EDL It can kill your phone, if you're not sure, go to the service.

Frequent Errors in EDLs and Their Solutions:

💡

If the phone is not included in the EDL from the buttons, you can use testpoint (closing contacts on the board). This requires disassembling the device - it is better to trust this specialist.

5. Diagnostics of hardware malfunctions

If none of the software methods worked, the problem could be the hardware. Here are the most common hardware malfunctions of the Redmi Note 10 Pro and their signs:

🔋 Battery:

• 🔌 The phone does not charge even if the cable and power supply are good.
• 📉 The battery discharges in a few minutes or swells (seemingly by the curvature of the body).
• 🔥 The phone is warming up in the battery area.

Solution: Replacement of the battery (cost) ~1500–2500 ₽ service).

📱 Power controller:

• 🔌 The charging indicator does not burn, but the phone is determined by the computer.
• 🔄 The phone is turned on only from charging, without it immediately turns off.

Solution: Repair or replacement of motherboard (~3000–5000 ₽).

🖥️ Display/steer:

• 📺 The screen is black, but the phone rings and vibrates.
• 🔦 The backlight is working, but the image is missing or distorted.

Solution: Replacement of display (~4000–6000 ₽) plume (~1000–1500 ₽).

How to check hardware problems yourself:

1. Light a flashlight on the screen – if you can see the image, the problem is in the backlight.
2. Connect the headphones – if there is sound, but the screen does not work, the problem is in the display.
3. Try to turn on the phone without SIM-Memory cards and cards sometimes cause conflicts.

⚠️ Warning: If the phone has fallen into water or been subjected to severe vibration (for example, after a fall), do not try to turn it on without drying.

💡

If the phone does not turn on after a fall or moisture, self-repair can aggravate the problem.

Frequent questions and decisions

Here we have collected answers to the most common questions of Redmi Note 10 Pro users related to the inclusion and recovery.