Unlocking Xiaomi MDG1: All the ways from resetting the password to firmware

Welcome to the full Xiaomi Mi Unlocking Guide TV Stick MDG1 — A compact set-top box that sometimes becomes a brick after failed updates, forgotten passwords or system failures. PIN-If you need a Mi Account after a reset or not at all, this article will help you bring it back to life.

We will be looking at all the current unlocking methods in 2026, from official tools (like the Mi Unlock Tool) to manual interventions through the use of the device. ADB And Fastboot, and we'll focus on common user errors, like why, after a Recovery reset, the console asks for an old Xiaomi account, and how to get around it. The guide is good even if you've never flashed through the device, and every step is screenshot and explained.

⚠️ Important: Unlocking the bootloader or firmware MDG1 If the device is warranty-free, contact Xiaomi Service Center first.

1. Types of locks on Xiaomi MDG1 and their causes

Before you start unlocking, you need to understand what type of lock you are facing, and this depends on the choice of method:

• 🔒 Password/PIN-Code: Forgotten screen lock code (set in Mi settings) TV Stick).
• 📱 Mi Account: Requirement to enter a login / password after resetting (Factory Reset Protection protection).
• 🚫 Blocked bootloader: Inability to flash the device through Fastboot (typical for official firmware).
• 🔄 Brick (soft/hard): The device does not turn on or hung on the Mi logo after a failed update.

The most common problem is blocking Mi Accounts, which occurs when:

1. You reset your settings through Recovery without detaching your account.
2. We bought a used console where the previous owner did not delete his profile.
3. The device was stolen (in this case, unlocking is officially impossible).

💡 How do you determine the type of lock? If you have a screen that says "This device is locked" or "Enter Mi Account," it's a Mi Account. If the console doesn't respond to the remote and doesn't turn on, it's probably a breeze.

2. Password unlocking/PIN-codeless

If you just forgot the lock code, but remember the data from Mi Account, you can do without radical methods.

Method 1: Reset via Mi Account (official method)

This method works if the console is connected to the Internet and is linked to your Xiaomi account:

1. On the input screen PIN-Do you have a password? (or Forgot) PIN?).
2. Enter the email/phone associated with the Mi Account.
3. Confirm the action via SMS or mail.
4. Create a new one. PIN-code.

⚠️ Warning: If the console is not connected to Wi-Fi, this method will not work.

Method 2: Use of ADB (for advanced)

If you have debugging enabled ADB (which is unlikely on a locked device, you can delete the file with the password:

adb shell


su




rm /data/system/gesture.key




rm /data/system/password.key




reboot

Once you reset, the password will reset, but again, this method only works if you're not using it. ADB It was activated before the lockdown.

Method 3: Hard Reset (Hard Reset)

If the first two methods don't work, you'll have to do a complete reset. MDG1 It's done this way:

1. Turn the console off the power.
2. Press the Reset button (on the case next to the HDMI-port and connect the power cable.
3. Hold the button for 10-15 seconds until the Mi logo appears.
4. From the Recovery menu, select Wipe Data → Yes.

⚠️ Note: After that, the console may require you to enter Mi Account, if you previously had an account attached.

Disconnect the console from the network|Find the Reset button on the body|Prepare the needle/clip for pressing|Check the connection to HDMI (menu-display)-->

3 Unlocking Mi Account after reset

If after resetting Xiaomi settings MDG1 requires a username and password from Mi Account, which means that the device is linked to the previous owner’s account (or yours if you forgot the data:

Recovery of access to Mi Account

If you are yours, but you do not remember your account details:

1. Go to account.xiaomi.com.
2. Click Forgot Password? and follow the instructions.
3. Confirm the recovery via email or SMS.
4. Enter new data in the console.

💡 Tip: If you have access to an email linked to your account, check the Inbox folder – there may be an email with a backup password from Xiaomi.

Unofficial methods (at your own risk)

If you have a handheld console and the previous owner hasn't unblocked your account, you can't officially unblock it.

• 📧 Contact the previous owner: Ask them to remove the device from their account via Settings → Mi Account → Devices.
• 🛠️ Fastboot firmware: Installing custom firmware (like LineageOS) bypasses account verification but requires unlocking the bootloader.
• 💰 Contact the service: Some workshops offer Mi Account withdrawal services for a fee (from 1,000). ₽).

⚠️ Note: Using unofficial firmware can lead to unstable performance of the console or loss of features (for example, Google Play or Miracast).

💡

If the console requires Mi Account after reset, try to restore access to the account first.

4. Unlock the bootloader on Xiaomi MDG1

To install custom firmware or restore the device after a breeze, it is often necessary to unlock the bootloader. MDG1 This is done through the official Mi Unlock Tool, but with nuances.

Step 1: Preparation of the device

Before unlocking:

1. Enable Developer Mode: Go to Settings → About the prefix → The software version and press 7 times on the line with the version.
2. Activate Debugging on USB and Unlocking OEM developer-menu.
3. Link your Mi Account to your device (required!).

Step 2: Installation of Mi Unlock Tool

Download the latest version of the Mi Unlock Tool from the official website and install it on your PC. Launch the program and log in under the same account as you did on the console.

Step 3: Connecting the console in Fastboot mode

To translate MDG1 fastboot:

1. Turn the console off the power.
2. Press the Reset button and connect the power cable.
3. Hold the button until a hare in a hat-eared hat appears on the screen (Fastboot logo).

Connect the console to the PC through USB-OTG Adapter (conventional cable won't work!) In Mi Unlock Tool, press Unlock and wait for the process to complete (usually 5-10 minutes).

⚠️ Note: Xiaomi can block unlocking the bootloader if the console was purchased less than 7 days ago or the account is new. EDL).

💡

If the Mi Unlock Tool gives you a "Couldn't unlock" error, try using an older version of the program (e.g. 3.5.1118.43) - sometimes it works more stable.

5. Recovery after a breech (soft and hard)

If Xiaomi MDG1 It doesn't turn on, it's stuck on the logo, it gives you a "No command" error, it's called a brick, and we'll figure out how to resuscitate the device depending on the type of failure.

Soft brik (the device is switched on but not loaded)

Symptoms: The console hangs on the Mi logo, reboots in the loop or gives an error "System crashed".

Decision:

1. Download to Recovery (Reset button) + feeding).
2. Choose the Wipe Cache → Yes.
3. If it doesn’t work, do Wipe Data (full reset).
4. Fly the device through Fastboot (instruction below).

Hard brik (the device does not respond)

Symptoms: the console does not turn on, does not respond to buttons, is not determined by the PC.

Decision:

• 🔌 Check the power: Try another power supply (5V/2A) cable.
• 🖥️ Firmware through EDL: It requires a special cable and a MiFlash program.
• 🔧 If the independent firmware did not help, memory may be damaged (eMMC).

💡 How do you tell a soft breech from a hard one? If the console responds to the Reset button in any way (like a flashing light) it's a soft breech. If it doesn't, it's a hard one.

6. Xiaomi firmware MDG1 via Fastboot and EDL

If other methods didn't work, it's the firmware, and let's look at two ways: Fastboot, and EDL (hard-on).

Firmware through Fastboot

You'll need:

• 🖥️ Windows PC;
• 🔌 USB-OTG adapter;
• 📁 Firmware for MDG1 (Download from Xiaomifirmwareupdater.com);
• 🛠️ MiFlash Tool or fastboot from Platform Tools.

Instructions:

1. Unpack the firmware in a folder. fastboot_rom.
2. Translate the console to Fastboot (Reset button) + feeding).
3. Connect to your PC and check for device detection by command: fastboot devices
4. Run the firmware: fastboot flash all or through MiFlash (select the firmware folder and press Flash).

Firmware through EDL

This method is more complex and requires:

• 🔧 EDL-cable (or self-closing contacts on the board);
• 📁 Firmware in.mbn format;
• 🖥️ MiFlash or QFil program.

⚠️ Note: Incorrect Firmware Through EDL If you're not sure, you better get the service.

📌 Where do I get the firmware? MDG1 You can download it at Xiaomifirmwareupdater.com. EDL Look for tagged files "EDL authorized".

💡

Fastboot Firmware is the Safest Way to Recover. EDL Use only if other methods do not help.

7. Alternative methods of unlocking

If the standard methods do not work, you can try non-obvious solutions:

• 📡 Wi-Fi reset: Some users report that if you connect the console to the network with access to the Mi Account, the lock is automatically removed.

💡 Experimental method: Some owners MDG1 They were able to bypass Mi Account by passing the device through the TWRP (Custom recovery, however, for this model TWRP Unofficial and may work in an unstable manner.

⚠️ Note: Before using alternative methods, back up the data (if the device is switched on at all). ADB pull /sdcard.

8. Frequent errors and their solutions

When unlocking Xiaomi MDG1 And users often have to deal with the typical problems:

💬 Community tip: If the Mi Unlock Tool gives an error "Device is not supported", try changing your account region to China in the Mi Account settings.

💡

If the console after firmware stuck on the logo, try to reset the cache through Recovery: Wipe → Wipe Cache.

FAQ: Frequent questions about unlocking Xiaomi MDG1