Reset password on Xiaomi HyperOS: all ways to unlock

The transition to the new Xiaomi HyperOS operating system brought not only visual improvements, but also increased security measures, which sometimes creates difficulties for users, PIN-A code or digital password is one of the most common reasons for contacting service centers, but don't panic, as there are several proven methods of restoring access to the device, each of which has its own nuances and requirements.

The effectiveness of the chosen method depends on whether you have previously signed in to Mi Account and activated the function “Find device”. In some cases, you can do a remote reset, saving personal data, while in others you will need a full Hard Reset. Understanding the security architecture of HyperOS will help you choose the right algorithm of actions and avoid locking your smartphone at the server level.

In this article, we will take a look at all the current unlocking methods, from regular recovery tools to the use of the engineering menu, how to bypass the protection if you forgot the password, and what steps you need to take to make the phone fully functional again.

Using the “Find Device” function for remote reset

The most gentle method to avoid losing personal files is to use a cloud service from the manufacturer. If your HyperOS device has logged in to your Xiaomi Account and the Internet is turned on, you can try to unlock the screen remotely, which only works if the Find Device function has been activated in advance in the security settings.

To start the procedure, you need to go to the official website of the cloud service from any other gadget that has access to the network. You will need to enter the login and password from the account to which the locked smartphone is attached. After successful authorization, the system will offer a list of available actions, among which you need to choose the option of blocking or clearing data.

• 🔒 Select the “Block” option to set a new temporary password that will replace the forgotten one.
• 🗑️ Use the “Clean” command if you need to completely erase data and remove protection.
• 📡 Make sure the problem device is on GPS and transfer data to execute the command.
• 🔄 Wait for confirmation of the operation on the computer screen.

Note that the data cleanup command will lead to a full Factory Reset, so all photos, contacts and apps will be deleted without recovery. If you choose to set a new password, the smartphone will unlock, and you can log into the settings menu to disable the old security key, which is the only way to save data without knowing the current access code.

Resetting with Recovery Mode (Hard Reset)

If the remote method is not available, the only option is forced reset via the recovery menu, a method standard for Android devices and allows you to return the system to a factory state. On Xiaomi HyperOS, the entry into Recovery mode is carried out by a combination of physical buttons when the device is turned off.

Before starting the procedure, make sure that the battery is at least 30-40%, as the formatting process requires energy.If the phone turns off at the time of writing system files, this can lead to serious boot errors.

Once you log in, the navigation is done with volume buttons, and the choice is confirmed by the power button. You need to find the Wipe Data item and select the Wipe All Data option. The system will require confirmation of actions, as this is an irreversible operation. After the process is complete, select Reboot to restart the device.

⚠️ Warning: After resetting via Recovery, the HyperOS menu activates protection FRP (Factory Reset Protection: This means that when you first boot, the phone will require you to enter a password from a Google account or Mi Account that was synced to the device before the reset.

Unlocking with Mi Flash Tool and Fastboot Mode

For more advanced users who cannot use standard methods, there is the possibility of flashing the device through the computer. Using the Mi Flash Tool utility allows you to record a clean image of the system without passing the lock screen. This method requires the ADB and Fastboot drivers, as well as a firmware tab for your model.

First, you need to transfer the smartphone to Fastboot mode. To do this, when the phone is turned off, press the volume button and connect the volume button. USB-The screen will show a picture of a hare repairing an android, which indicates that it has successfully entered bootloader mode.

Run the Mi Flash Tool on your computer and choose the path to the folder with the unpacked firmware. In the program settings, you need to select the clean all option, which implies complete data cleaning. Pressing the Flash button will start the recording process, which can take anywhere from 5 to 15 minutes depending on the speed. USB-port and memory capacity.

It is important to understand that this method completely destroys all user data, including photos, correspondence and installed applications. However, it ensures the removal of the forgotten password and any software blockers. Once the firmware is completed, the phone will start as new, requiring initial configuration.

Comparison of Access Restoration Methods

The choice of the specific way to unlock depends on your situation: access to the Internet, knowledge of credentials and willingness to lose files. Below is a comparison table that will help determine the best solution for your case.

As you can see from the table, cloud services are the most convenient, but they require some preparation. Complete reset methods are universal, but they cause loss of information. If data is critical, you should turn to professionals who can try to extract information from a memory chip, although in today's HyperOS environment it is extremely difficult to do this because of encryption.

💡

The fastest way is to remotely reset via the Mi Account site, but it only works if the phone is online and linked to the account.

Mi and Google account issues after reset

Xiaomi smartphones today are equipped with a powerful anti-theft system. Once you run Hard Reset or flash it, the security system will require proof of ownership, which means you will have to enter a login and password from a Google account that was synced to the device before the lock.

If you forget that, too, it becomes much more difficult to restore access, and you have to go through the process of retrieving your account through Google, which can take time and require access to a backup email or phone number, and without proof of identity, the device will remain locked, and it will be almost impossible to get around it with regular means.

• 📱 Check if you remember the password from the email that your Google account is linked to.
• 🔑 Make sure that the phone number listed in your account is available for SMS.
• 💻 Try to log into your account from your computer to make sure it works.
• 🛡️ If two-factor authentication is enabled, prepare access codes or backup keys.

In the case of Mi Account, the situation is similar: without entering correct credentials, the phone will not allow you to complete the setup, this is done so that the stolen device can not simply be reflashed and sold, so always record your account details in a safe place.

⚠️ Note: There are many programs to bypass Google Lock (FRP Bypass, but their use on HyperOS often leads to unstable system operation or re-blocking after updating.In addition, downloading such utilities from unverified sources carries the risk of infecting the computer with viruses.

Prevention of blocking and safety advice

To avoid similar situations in the future, it is recommended to configure alternative methods of unlocking. Biometric data, such as a fingerprint or a face scan, allows you to quickly access the device even if you forget the digital code.

Back up your important data regularly. You can use Xiaomi’s built-in cloud or third-party services like Google Photos and Google Drive. Automatic synchronization ensures that your contacts and photos are safe even if you have to do a complete system reset.

💡

Install a password management app (password manager) that will help you store complex and unique passwords for different services, eliminating the need to remember them.

Also, don't neglect the emergency contact feature: set up the lock screen so that if necessary, anyone can contact your trusted person without unlocking your phone, which can be useful not only in case of forgotten passwords, but also in emergency situations.

Frequently Asked Questions (FAQ)