Reset Xiaomi G1 to factory settings: full instruction with pictures and tips

The Xiaomi G1 robot vacuum cleaner is one of the most popular cleaning assistants, but even with such a technique, there are sometimes problems: malfunctions, map errors, Wi-Fi connections or incorrect behavior after a firmware update. In most cases, resetting to factory settings helps to bring the device back to life - a procedure that erases all user data and returns a "clean" system.

However, not everyone knows that the Xiaomi G1 has three types of reset: soft (saves room maps), hard (full reset) and reset via the Mi Home app. Each solves different tasks, and the wrong choice can lead to unnecessary problems. In this article, we will analyze all the ways, tell you how to avoid typical errors, and give tips for recovery after reset.

If your vacuum cleaner suddenly stops listening, gives an Error 10 error or just behaves "strangely" - do not rush to bring it to the service. In 80% of cases, the problem is solved by resetting in 5-10 minutes, the main thing is to follow the instructions and not miss important steps.

When do I need to reset the Xiaomi G1?

Resetting is not a universal solution, but it does help in a number of situations, and here are the main cases where the procedure is justified:

• 🔄 Robot vacuum cleaner hovers during cleaning and does not respond to buttons or app.
• 📡 Wi-Fi connection problems: fails to find the network, permanently disconnects, or requires re-authorization.
• 🗺️ Mistakes in map construction: vacuum cleaner "lost" in a familiar room, does not recognize the zone or builds a map chaotically.
• 🔋 The battery quickly discharges after updating the firmware (sometimes the reset helps to return the previous autonomy).
• 🛠️ Preparing to sell or transfer the device to another user.
• 📱 Conflicts after changing your smartphone or Mi Account.

However, there are situations where resetting will not help:

• ⚠️ Mechanical breakdowns (for example, the brush or wheel does not work).
• ⚠️ Battery problems if it swells or doesn't hold a charge even after being discharged.
• ⚠️ Sensor errors (e.g., a constant message that there is no obstacle when there is no obstacle).

⚠️ Note: If the vacuum cleaner produces an Error 5 (fan problem) or Error 12 (brush jamming), resetting the settings will not eliminate the cause.

Three ways to reset Xiaomi G1: which one to choose?

The Xiaomi G1 robot vacuum cleaner has three official reset methods, which differ in depth and complexity, and let's look at each one in detail.

If you're not sure which way to go, start with a soft reset, which is the safest and doesn't delete any stored maps of the premises, and if you have a problem, you can go to a hard reset.

💡

Hard reset removes all data, including maps of the premises, and then you have to adjust the vacuum cleaner from scratch, like after you buy it.

Method 1: Soft reset (reset)

This is the simplest and safest method, and it helps with minor failures, and it doesn't delete user data, it just restarts the vacuum cleaner system.

Instructions:

1. Make sure the vacuum cleaner is on (the indicator is on or blinking).
2. Press and hold the Power button (also known as the Power button) for 10-15 seconds.
3. Release the button when you hear the beep or see that the indicator has gone out and started to light up again.
4. Wait for a full reboot (usually takes 1-2 minutes).

After a soft discharge, the vacuum cleaner should work normally. If the problem persists (for example, does not build a map or connect to Wi-Fi), move to the next method.

💡

If the vacuum cleaner doesn't respond to the button holding, try plugging it into the charging station and repeating the procedure. Sometimes the discharged battery blocks the reset.

Method 2: Hard reset (complete)

This method completely erases all data, including stored maps of the premises, cleaning settings and binding to the Mi Home account. Use it only in extreme cases or before selling the device.

Step-by-step:

1. Turn on the vacuum cleaner (if it is turned off).
2. Press and hold two buttons at the same time: Power and Home (button with the image of the house).
3. Hold them for at least 10 seconds until you hear a voice message in Chinese (or English, depending on the firmware) confirming the reset.
4. Release the buttons. The vacuum cleaner will start the reset process, which will take 2-3 minutes.
5. After restarting, the indicator flashes orange – this means that the device is ready for a new setup.

If the vacuum cleaner doesn’t turn on or flashes red after the reset, this may indicate a firmware problem, in which case you can try updating the software through the Mi Home app or contact the service.

⚠️ Note: Some versions of Xiaomi firmware G1 After a hard reset, you may need to re-link to your Mi Account. If you forget your login details, restore them in advance, otherwise the vacuum cleaner will not be able to connect to the application.

Charge the vacuum cleaner at least 50%|Take screenshots of the maps of the premises (if you need to save)|Untie the device from the account in Mi Home (optional)|Prepare the data for entering the Mi Account-->

Method 3: Reset via the Mi Home app

This method is convenient if the vacuum cleaner is connected to the application, but it does not work correctly. Reset via Mi Home allows you to save the binding to the account, but removes all cleaning and map settings.

How to do this:

1. Open the Mi Home app and go to the section with your vacuum cleaner.
2. Tap it on three points (⋮) in the upper right corner and select Device Settings.
3. Scroll down and find Reset to factory settings.
4. Confirm action. The vacuum cleaner will begin the resetting process.
5. Once completed, reconnect the device to Wi-Fi and set it up again.

If the app doesn't have a reset button, upgrade your Mi Home to the latest version, and check that the vacuum cleaner is connected to the same account that was used when you first set up.

Frequent Resetting Mistakes and How to Avoid Them

Even when following the instructions, users often encounter problems, and here are the most common mistakes and ways to solve them:

• 🔌 The vacuum cleaner doesn't respond to the buttons → Check the battery charge (plug it into the charging station for 10-15 minutes) or try a reset with connected power.
• 📶 After reset, it does not connect to Wi-Fi. → Make sure the router is running at 2.4GHz (the vacuum cleaner does not support 5GHz.
• 🔊 No audible reset confirmation. → The vacuum cleaner speaker may be defective. Focus on the indicators: after a successful discharge, the light bulb should flash orange.
• 🔄 The discharge is interrupted in the middle. → Do not turn off the vacuum cleaner during the procedure.If the discharge freezes, try again in 5 minutes.
• 📱 App doesn't see vacuum cleaner after dumping → Remove the device from Mi Home and add again (click Add Device) → Robot vacuum cleaner).

If the vacuum cleaner gives an Error 2 error after the discharge, try to wipe the sensors with a dry cloth, sometimes dust or dirt interferes with the correct operation.

Recovery after reset: step-by-step guide

After a successful discharge, the vacuum cleaner returns to the factory settings. To get it back to work, follow the following steps:

1. Wi-Fi Connection: Turn on the vacuum cleaner and wait for it to sound. In the Mi Home app, tap Add Device and select Robot Vacuum. Follow the instructions on the screen to connect to the 2.4 GHz network.
2. Setup of the room map: Start the first cleaning in Full Cleaning mode (at least 10-15 minutes). After building the map, mark areas and forbidden areas in the application.
3. Update to firmware: Go to Device Settings → Update to firmware. If a new version is available, install it (this will fix any bugs).

Personalization:

• Set up a cleaning schedule, suction strength and other parameters to suit your needs.

If the vacuum cleaner becomes worse after reset (for example, builds a map worse or discharges faster), try rolling back the firmware to the previous version.

⚠️ Warning: If you sell or transfer a vacuum cleaner to another user, be sure to untie it from your Mi Account. To do this, go to the device settings in Mi Home and select Remove the device. Otherwise, the new owner will not be able to connect it.

FAQ: Answers to Frequent Questions