Reset Xiaomi Mi TV 4X Factory settings: 5 working methods

Xiaomi Mi TV 4X — It's a popular smart TV model, but even that one sometimes has problems: the system slows down, the apps fly out, or the device stops responding to commands altogether, and in 80 percent of these cases, factory resets help. However, an improperly executed procedure can result in the loss of important data or even the “bricking” of the device.

In this article, we will analyze all the current ways to reset Xiaomi Mi TV 4X — From the standard menu to emergency methods, through the buttons on the case, you'll learn how to prepare the TV for resetting, what settings to save in advance, and what to do if there are errors after the procedure. ADB and Fastboot.

Important: the procedure for resetting on Mi TV 4X It is different from similar actions on Xiaomi smartphones or other models of the brand’s TVs. There is no physical Reset button, and the algorithm depends on the firmware version (on Android models). TV 9 and later requires confirmation via Mi Account).

1.When you need a Xiaomi Mi reset TV 4X: 7 signs

Factory resets are a last resort, but sometimes they are necessary, and here are the key symptoms that indicate the need for the procedure:

• 🐢 The TV was getting stuck on the Mi logo TV or cyclically rebooted (so-called bootloop").
• 🚫 Apps (especially Netflix, YouTube, Prime Video) crash immediately after launch or show an error".
• 🔄 Settings are reset by themselves (e.g. brightness, sound, connected devices).
• 📶 Wi-Fi or Bluetooth not turned on despite correct router settings.
• 🎮 The remote does not respond to pressing (the batteries are serviceable, and the IR port is not damaged).
• 🔒 TV blocked after failed update or region change.
• 📺 The picture is blurred, with artifacts or no sound with serviceable cables and signal sources.

If the problem is hardware in nature (for example, broken pixels, cracks on the screen, broken ports) HDMI), Reset won't help -- you'll need repairs at the service center. To tell the difference between a software failure and a breakdown, try connecting another device (like a Xiaomi Mi Box or laptop) to your TV via the same cable.

⚠️ Attention: On Mi models TV 4X Android-based TV 10+ Resetting via the menu may require you to enter a password from your Mi Account. If you don’t remember it, use the Fastboot reset method (section 4).

2.Reset preparation: what to save and how to avoid mistakes

Before the Xiaomi Mi reset TV 4X Ignoring this stage can lead to the loss of licenses for applications (for example, Netflix). 4K or Disney+), Smart Home settings and even locking your device.

Here's what you have to do:

• 📋 Take a picture of the current settings: List of installed applications (Settings section) → Applications. Image parameters (Settings) → Display and sound → Image. Network settings (Settings) → Network and Internet).
• 🔑 Unplug accounts: log out of Google Account (Settings) → Delete the Mi Account link (if the TV is synced to Xiaomi ecosystem).
• 💾 Save data: Screenshots from the screen (if you want to save the location of widgets), Logins / passwords from services (for example, IPTV kodi).

Pay particular attention to content licenses, for example, after a reset, Netflix may need to be re-activated in Ultra. HD You can also use YouTube Premium, and some apps, like Megogo or Okko, are attached to the device and you have to reinstall them.

If the TV is not on or getting stuck, skip this stage and proceed immediately to emergency reset methods.

3. Method 1: Reset via the settings menu (the safest)

This method works if the TV turns on and responds to the remote. It's suitable for most firmware versions, including Android. TV 9/10/11.

Step-by-step:

1. Open the Settings (button with a gear on the remote).
2. Go to the Device section → Reset and Recovery (on some firmwares, the path may be different: System) → Additionally. → Reset).
3. Select Reset to factory settings.
4. If you have a request, enter PIN-code (by default 0000 or 1234 if you have not changed it).
5. Confirm the action by choosing Delete Everything.

The process will take 3-5 minutes, and the TV will restart and offer to go through the initial setup, as after purchase.

⚠️ Note: On firmware with PatchWall (Indian version of Mi) TV 4X) After the reset, you may need to re-activate Prime Video and Hotstar services through the SMS-code.

💡

If after a reset, the TV asks you to update your firmware, but the update is 0% down, shut down the Internet for 10 minutes, then try again. This resets the update cache.

Method 2: Emergency reset through buttons on the body (if the TV does not respond)

If Xiaomi Mi TV 4X It doesn't turn on, it doesn't hover on the logo, it doesn't respond to the remote, so use physical buttons on the back, and this works on all versions of the TV, including models with damaged firmware.

You'll need:

• 🔌 Needle or paper clip (to press the Reset button).
• ⚡ Power supply (TV must be connected to the socket).

Instructions:

1. Find the reset button on the back of the TV (usually located near the ports). HDMI marked as RESET or dotted).
2. Press and hold the button for 10-15 seconds with a needle or a paper clip. Use sufficient force - the button is recessed in the case.
3. Release the button when the power indicator starts flashing red (or goes out and lights up again).
4. Wait 2-3 minutes – the TV will automatically restart and start the reset procedure.

If the TV doesn’t turn on after that, try the combination:

1. Turn off the power (remove the plug from the socket).
2. Press the Reset button and, holding it, connect the power.
3. Hold the button for another 20 seconds, then let go.

5. Method 3: Fastboot Reset (for power users)

This method requires a computer and command line knowledge, and it's suitable if:

• The TV does not respond to buttons and remotes.
• Resetting through the menu requires a password from Mi Account that you don't remember.
• The firmware is damaged (for example, after a failed update).

You'll need:

• 💻 Computer with Windows or macOS.
• 🔌 Cable USB-A — USB-A (port-connect OTG TV-wise).
• 📥 Utilities. ADB and Fastboot (download from Android site).

Step-by-step:

1. Connect the TV to your computer via port USB (OTG) (usually located near HDMI).
2. Open Command Prompt (cmd) or Terminal and go to the folder with ADB.
3. Enter the command to check the connection: adb devices If the TV is determined, execute: adb reboot bootloader
4. After restarting, enter: fastboot devices (should display the serial number of the device).
5. Run reset: fastboot erase userdata fastboot erase cache fastboot reboot

If the television is not installed in ADB, try:

• Use a different cable (preferably original).
• Disable the firewall/antivirus on your computer.
• Install Google Drivers USB Driver.

⚠️ Note: Fastboot erase commands completely delete data from the userdata section. If you plan to sell a TV, then follow this procedure by also performing fastboot erase frp to remove the link to your Google account.

💡

Fastboot reset is the only way to bypass Mi Account lock on Android firmware TV 10+. However, it requires a connection to a computer and can void the warranty if the TV is not officially unlocked.

6. Method 4: Reset via Recovery Mode (Hidden Menu)

On Xiaomi Mi. TV 4X There's a hidden recovery menu, similar to the one used in smartphones, that you can access through a combination of buttons on the remote.

Instructions:

1. Turn off the TV (if it is frozen, remove the plug from the socket for 10 seconds).
2. On the remote, simultaneously press the buttons: Menu (Menu) + Home) + Back up (shoot to the left) and hold them down.
3. Without releasing buttons, connect the TV to the network (insert the plug into the socket).
4. Hold the buttons for another 10-15 seconds until the Recovery menu appears.
5. In the menu, select Wipe. data/factory Reset (Use the Up/Down buttons on the remote for navigation, OK confirm).
6. Confirm the action by selecting Yes.
7. Once completed, select Reboot system now.

If the Recovery menu doesn’t appear, try an alternative combination:

• Hold the Menu. + Volume down (on remotes with volume buttons).
• Or Home. + Back up. + Loudness up.

On some firmware, the Recovery menu may be in English or Chinese, and look for items with the words "wipe", "reset" or characters (reset to factory settings).

7.What to do after resetting: setting up and recovering data

After the Xiaomi Mi reset TV 4X You're going to have to go through the initial setup. Here are the key steps that users often miss:

• 🌐 Network Connection: Use Wi-Fi 5 GHz for stable operation (2.4 GHz can be lags).If Wi-Fi is not connected, try an Ethernet cable.
• 🔑 Log in to your accounts: First sign in to Google Account (required for Play Market) then link in to Mi Account (if you plan to use the Xiaomi ecosystem).
• 📺 Image customization: Select Movie Mode for Movie or Game Mode for Consoles. Turn off Motion Smoothing).
• 🎮 Device Connection: For Xiaomi Mi Box or Fire TV Stick use the port HDMI 2.0 (marked as ARC). For sound panels - port HDMI ARC or.

If applications (such as Netflix or YouTube) are not working after reset, follow these steps:

1. Update the firmware: Settings → The device → Update of the PO.
2. Clear the cache of Google Play Services: Settings → Annexes → Show system-based → Google Play Services → Clear the cache.
3. Reinstall problematic applications.

To restore licenses to 4K-Content (such as Netflix or Disney)+) may be required:

• Re-activation of the device in the service account.
• Removal of rights DRM (In some cases, rebooting the TV helps).

8. Frequent errors after reset and how to fix them

Even after a successful reset of Xiaomi Mi TV 4X There may be problems. Here are the most common ones and the ways to solve them:

If the TV does not turn on or hovers on the logo after reset, this may indicate:

• Damaged firmware (requires flashing through the USB).
• Memory malfunction (eMMC).
• Power supply problems.

In such cases, we recommend you to contact the Xiaomi service center or use the recovery method through Fastboot.

FAQ: Answers to Frequent Questions