How to turn on the Xiaomi Mi TV TV 4S 43: All ways and solutions to problems

Xiaomi Mi TV TV 4S The 43 is a popular smart TV model that combines affordable price and modern features, but even with such a device, there can be situations when it does not turn on or responds to commands in unexpected ways. In this article, we will discuss all possible ways to turn on the TV, from standard to alternative, and also consider typical problems and their solutions.

It's important to understand that the causes of "inoperability" can range from a banal lack of power to software failures. We're not going to limit ourselves to the obvious advice "check the socket", but go into the nuances: from hardware reset to diagnostic status indicators. TV 4S does not respond to the remote or power button – here you will find step-by-step instructions taking into account the features of this model.

This article will be useful for both beginners and experienced users, and we've gathered information from Xiaomi's official sources, owner feedback, and service manuals to provide the most complete guide, starting with the basic methods and gradually moving on to more complex manipulations.

Standard onset of the Xiaomi Mi TV TV 4S 43

So let's start with the simplest one: how to turn on the TV properly in normal mode. TV 4S 43, there are two main ways to launch: using a remote control and a power button on the case.

To be activated by remote:

• 🔄 Press and hold the Power button (usually located in the top left corner of the remote) for a period of time. 1-2 The Mi logo should appear on the screen. TV.
• 📺 If the TV does not respond, check the batteries in the remote control - replace them with new ones (alkaline type is recommended). AAA).
• 🔌 Make sure the TV is plugged into the outlet and the power indicator (the small LED under the screen) flashes or burns red.

If the remote is lost or not working, use the physical button on the case:

1. Find the power button on the back of the TV (usually under the Mi logo or side).
2. Press it once. If the TV is in sleep mode, it will turn on immediately. If it's completely off, hold the button. 3-5 seconds.

Note that after a long downtime (for example, after disconnection from the network), the first download can take up to 30 seconds. This is normal - the TV conducts self-testing of components. If the screen remains black for longer than a minute, move to the next section with the diagnosis of problems.

Diagnosis by the nutrition indicator

Status indicator on Xiaomi Mi TV 4S 43 is your primary malfunctioning assistant, located on the bottom of the screen (right or center) and can be in three states:

Critical information: If the indicator flashes red at intervals of 3 seconds, this indicates a firmware error. USB.

For accurate diagnosis:

• 🔍 Disconnect all external devices (configures, sound systems) from HDMI-port.
• 🔌 Try another power cable (the original unit from Xiaomi has an output voltage). 19.5V 2.31A).
• 🔄 Perform power reset: Remove the plug from the socket, hold the power button on the case for 15 seconds, then plug back in.

💡

If the TV turns on but turns off after a few seconds, check the vents on the back. Overheating can cause an automatic shutdown.

Alternative ways of inclusion

If standard methods didn’t work, try alternatives. Xiaomi’s current smart TVs support a few non-obvious ways to launch.

1.Through the Mi Home app

For this:

1. Install the Mi Home app on your smartphone (available for Android and iOS).
2. Sign in with the same Xiaomi account as you do on your TV.
3. Add the device manually by selecting the Mi model TV 4S 43.
4. In the device card, press "Enable".

Note: TV and smartphone must be connected to the same Wi-Fi network, and if the TV is not connected to the Internet, this method will not work.

2.Voice assistant

Mi TV 4S 43 supports voice control via Alice (Yandex) or Google Assistant:

• 🎤 Say, OK, Google, turn on Mi. TV" (If you have a Google account attached).
• 🎤 Or: “Alice, turn on the TV” (if you configure integration with Yandex).

Important: Voice commands only work if the TV is in standby mode (the indicator is lit red), and not completely off.

3. Over the network (Wake-on-LAN)

For advanced users, there is the possibility of enabling over the local network:

Arp network scanning → determining MAC- TV address → sending Magic Packet

This method requires having another device on the network (PC or router) and pre-configuring WoL in the settings of the TV.

Forced dumping and reinstatement

If the TV doesn't respond to either way, it may need a hardware reset. TV 4S 43 has a hidden button combination to reset settings to factory.

Instructions for hard reset:

1. Turn the TV off the socket.
2. Press and hold the Menu button on the remote. + Volume button - on the body.
3. Without releasing the buttons, connect the power.
4. Hold the combination. 10-15 A few seconds before the recovery menu appears.
5. Select Wipe Data/Factory Reset using volume buttons and confirm the selection.

⚠️

Warning: After the reset, all installed apps, accounts and personal settings will be deleted and can only be restored manually.

If the reset didn’t work, try reflashing the TV:

• 📁 Download the official firmware for Mi TV 4S 43 from Xiaomi Support.
• 💾 Unpack. ZIP-archive and copy the file update.zip formatted FAT32 flash-drive.
• 🔌 Put the flash drive in. USB-TV port (preferably to port) USB 2.0 on the back).
• 🔄 Press the Menu button on the remote and the power button on the body simultaneously for 10 seconds.

💡

Compulsory renewal through USB — It's an extreme method that should only be used if other methods have not worked.

Frequent problems and their solutions

Let’s look at the typical situations faced by Mi owners. TV 4S 43 and ways of eliminating them.

1.The TV is turned on, but the screen remains black

Possible causes:

• 💡 Failure of the backlight (the screen glows if illuminated with a flashlight at an angle).
• 🔧 Problems with the matrix or plume.
• 🖥️ GPU failure.

Decisions:

• 🔄 Try restarting the TV with the power button holding for 15 seconds.
• 🔌 Turn it off. HDMI-Devices – possibly signal conflict.
• 📞 Contact the service center if the problem is hardware.

2.The television is spontaneously turned off

This is most often related to:

• 🔥 Overheating (check the ventilation holes).
• ⚡ Unstable power supply (use a network filter).
• 🛠️ Firmware failure (update the software).

3.The remote is not working, but the buttons on the body are reacting

The problem with the remote is solved as follows:

• 🔋 Replace your batteries with new ones (even if the old ones seem to work").
• 📸 Check the IR transmitter of the remote through the camera of the smartphone – when you press the buttons, pulsating light should be visible.
• 🔄 Restart the TV – sometimes synchronization with the remote is lost.
• 🛒 Buy a universal remote with Xiaomi support TV (For example, Xiaomi Mi Remote).

⚠️

Warning: If the remote is still out of service after the battery is replaced, the IR receiver of the TV is not out of the question, and only service repairs will help.

Prevention and maintenance advice

To avoid problems with inclusion in the future, follow these guidelines:

• ⚡ Use only the original Xiaomi power supply with options 19.5V 2.31A. Cheap analogues can cause unstable work.
• 🔄 Once 2-3 Perform a soft reboot: turn off the TV from the outlet on the 5 minute.
• 📦 Do not cover the TV with a cloth or other objects – it disrupts heat exchange.
• 🛠️ Regularly update the firmware through the Settings menu → On TV. → Updating the system.
• 🌡️ Optimal operating temperature: from +5°C +35°C. Avoid direct sunlight.

To extend the life of the matrix:

• 🎮 Do not leave static images (such as channel logos) for a long time – this can cause pixels to burn out.
• 🔍 Check the brightness settings every six months. OLED-Panels: not higher than 70%.

If you often use external devices (confixes, sound systems), pay attention to the quality of the product. HDMI-For cables. 4K@60Hz Standard cables are required HDMI 2.0 Cheap cables can cause signal problems and spontaneous reboots of the TV.

When to contact the service center

Not all problems can be solved by yourself.

• 💥 The TV does not turn on at all (no indication, does not respond to resetting).
• 🔥 There is a smell of burning or traces of melting on the body are visible.
• 🖥️ Artifacts appear on the screen (stripes, flickers, broken pixels).
• 🔊 There is sound but no image (or vice versa).
• 🔄 The TV is cyclically restarted (on and off immediately).

In Russia and CIS countries, the official service Xiaomi provides warranty service for 12 months from the date of purchase.

• 📄 Check or guarantee card.
• 📦 Original packaging (preferably).
• 🆔 TV serial number (located on the back sticker).

⚠️

Warning: Self-repair (disassembly of the case, soldering of components) deprives you of the right to warranty service. If you are not sure of your skills, trust the diagnostics to professionals.

Costly repairs for Mi TV 4S 43 (according to service centers for 2026):

FAQ: Frequent questions about Xiaomi Mi TV 4S 43