Xiaomi Redmi phone is stuck on startup the screensaver of inclusion – what to do in 2026

You’ve turned on your Xiaomi Redmi, but instead of your desktop, you only see the MI logo or download animation that spins endlessly? This problem is familiar to many owners of Redmi smartphones – from the budget Redmi 9A to the flagship Redmi Note 12 Pro+. The reasons for hanging on the screensaver can be different, from a failure after a MIUI update to hardware malfunctions of the battery or motherboard.

In 80% of cases, you can solve the problem yourself without going to the service center, the main thing is to correctly diagnose the cause and find a recovery method. In this article, we will discuss 7 working methods, from the simplest (reboot) to the most complex (firmware via Fastboot), taking into account the features of different Redmi models, and you will learn how to avoid data loss and what to do if the phone does not respond to buttons at all.

We warn you right away: if your Redmi is stuck after a fall, moisture or disassembly, most likely the problem is hardware - in this case, it is better to immediately consult specialists. All other cases are amenable to software treatment.

1. Reasons Xiaomi Redmi hangs on the logo

Before you start resuscitation, it’s important to understand why the phone doesn’t load beyond the screensaver.

• 🔄 Failure after update MIUI — This is the most common reason. Especially true for Redmi Note models. 10/11, where updates are often "raw».
• 📱 Application conflict – if you install before hanging out APK from unknown sources or modified firmware.
• 🔋 Discharged or faulty battery – if the phone is turned off at 0% and does not turn on even after charging.
• 🛠️ Failed Settings Reset – A Hard Reset interrupted can lead to a download cycle.
• 💾 Damage to system files – for example, after incorrect disconnection from the PC during data transfer.
• 🌡️ Overheating or hypothermia – if the phone has been in the cold for a long time or under direct sunlight.

Redmi models with MediaTek processors (for example, Redmi 9/10) have more logo hangings than Snapdragon devices (for example, Redmi Note 11 Pro+).

⚠️ Warning: If the phone freezes after trying to get root rights or install custom recavery (TWRP), Don't try to stitch it through standard Xiaomi tools, which can lead to a complete bricking, and in such cases, you need special software like this. SP Flash Tool for MediaTek or QFil for Qualcomm.

2. Simple ways to reboot (without data loss)

Start with the safest methods that don’t affect your data, which are suitable if the phone responds to buttons but doesn’t load beyond the logo.

Forced reset

The most obvious but often ignored way is that on Redmi models, the button combination depends on the year of release:

• 📱 For Redmi. 9/10/Note 10/11 (2020–2023 d.: clamping down on the power supply + Loudness up on 10–15 seconds until the screen goes out.
• 📱 For older models (Redmi) 8/Note 8 And before that: clamping down on the power. + Loudness down.

After shutting down, wait 30 seconds and try turning on your phone in the usual way. If the MI logo hangs again longer than 5 minutes, move on to the next method.

Safe loading mode

Safe Mode allows you to download a phone with third-party apps disabled, and if the problem is conflicting software, this will help:

In Safe Mode, remove newly installed apps (especially those that required root or modification of system files) and then restart your phone normally.

Checking of the battery

If the phone doesn't respond to buttons or shuts down immediately after the logo appears, the battery may be the problem.

• 🔌 Connect the original charger and cable, leave at least 30 minutes on charging (even if the indicator does not burn).
• 🔋 If possible, check the phone with a different battery (relevant for removable battery models, such as the Redmi). 4X).
• 🌡️ If the phone overheats while charging, turn it off and let it cool - this could indicate a power controller malfunction.

⚠️ Note: If the phone vibrates after charging, but the screen remains black, this may be a sign of damage to the display plume. In this case, self-repair is not recommended - contact the service.

💡

If the phone is not responding to charging, try connecting it to your PC via USB. Sometimes this helps wake up the power controller, especially on Snapdragon models.

3. Reset settings via Recovery Mode

If simple methods don’t work, the next step is to reset your settings via Recovery Mode, which will delete all data from your phone, so only use it if:

• 📱 The phone doesn’t even boot up in Safe Mode.
• 🔄 You didn’t make a backup, but you’re willing to lose data for the sake of performance.
• 🛠️ You have not installed custom firmware or TWRP.

3.1 How to Sign In to Recovery Mode on Xiaomi Redmi

Instructions for most Redmi models (including Note 10/11/12):

1. Turn off your phone (if necessary).
2. Press Power + Volume up and hold for 10-15 seconds until the Recovery menu appears.
3. If the screen remains black but the phone vibrates, try Power + Volume up + Loud down (for some models).

3.2. perform reset (Wipe Data)

In the Recovery menu, you can control volume (move) and power (select) buttons.

1. Wipe Data → Wipe All Data (complete reset).
2. Confirm the action (usually you need to enter a password if it was set).
3. After reset, select Reboot → Reboot to System.

It can take 5-10 minutes to do this, and if the phone is hanging on the logo again after the reset, go to the firmware.

4. Firmware via Fastboot (for advanced users)

If the reset doesn't work, it's still running through Fastboot mode, which is suitable for most Redmi models, but requires a PC, USB-Xiaomi's official cable and firmware. All data will be deleted!

Preparation of tools

You'll need:

• 💻 Windows computer 10/11 (For the Mi Flash Tool).
• 🔌 Original. USB-cable (better from the set).
• 📥 Official firmware for your model (download from the site) MIUI Download).
• 🛠️ Mi Flash Tool (the latest version can be found on the forums) 4PDA or XDA).
• 🔑 Unlocked bootloader (if not previously unlocked, you will need to link to Mi Account).

Step-by-step instructions

Follow the algorithm:

1. Turn off the phone and put it in Fastboot mode: pinch Power + Volume down until the bunny appears (Fastboot Mode).
2. Connect your phone to your PC. Make sure the drivers are installed (if not, download the Mi USB Driver).
3. Unpack the downloaded firmware (.tgz or.zip format) into a folder without Cyrillic characters.
4. Open the Mi Flash Tool, press Select and point the path to the firmware folder.
5. At the bottom, select Clean All mode and press Flash.
6. Wait for the process to finish (5-10 minutes) and the phone will reboot automatically.

If the firmware fails (e.g., anti-rollback), you are trying to install an older version of MIUI than the one on your phone, in which case download the newer firmware.

⚠️ Note: On models with a MediaTek processor (Redmi) 9/10) For the firmware, a regime may be required EDL (This requires an authorized Xiaomi account and a special cable (Deep Flash Cable). Without experience, it is better not to take risks - contact the service.

💡

Fastboot removes all data, including photos and contacts. If your phone reacts in any way, try backing up your ADB first (if USB debugging is enabled).

5 What to do if the phone does not respond to buttons

This is complicated when Xiaomi Redmi not only hangs on the logo, but also doesn't respond to the button combinations.

Verification of hardware faults

First, eliminate physical damage:

• 🔋 Connect your phone to charge for 1-2 hours. If the charging indicator does not burn, the problem may be in the case of a battery:
• 📱 If the phone vibrates when charging, but the screen is black, the display plume or the matrix itself may have been damaged.

5.2. "Blind" firmware via EDL

If the phone is not included in either Recovery or Fastboot, then the EDL (Emergency Download Mode) mode remains.

• 💻 PC with Qualcomm drivers installed HS-USB QDLoader 9008 (for Snapdragon) or MediaTek Preloader (for MediaTek).
• 🔧 Special cable (Deep Flash Cable) or circuit contacts on the board (for experienced users).
• 📥 Firmware in.mbn format (for Qualcomm) or.bin (for MediaTek).

Firmware in EDL is a complex process that can finally brick your phone if you make a mistake, and if you're not sure about your skills, you'd better put it in service.

5.3 Contact the service centre

If none of these methods worked, it's probably a hardware problem.

• 🔧 Status of motherboard (for burnt-out items).
• 💾 Memory (eMMC or UFS) — Often fails after falling.
• 🔋 Battery contacts and connectors.

For example, replacing the eMMC with the Redmi Note 10 will cost 3-5 thousand rubles, and repairing the power controller - 2-3 thousand rubles.

6.How to avoid hanging on your logo in the future

To prevent your Xiaomi Redmi from hanging on the screensaver again, follow these recommendations:

• 🔄 Update. MIUI Wi-Fi only – interrupted updates on mobile networks often cause crashes.
• 📱 Do not install modified firmware without unlocking the bootloader.
• 🔋 Keep an eye on battery power – don’t let it run below 10%.
• 🛡️ Use original accessories – poor-quality charging and cables can damage the power controller.
• 📲 Clean the cache regularly through Settings → Memory. → Cleanup.
• 🔄 Make backup copies through Settings → System system → Backup.

If you like experimenting with firmware, get a separate phone for tests or use virtual machines.Modding on the main device often ends in brick (complete failure).

💡

Redmi models with MIUI 13 and later have an automatic crash recovery feature built in, so if the phone is stuck on the logo, wait 10-15 minutes - the system can restart itself in safe mode.

7. Frequent Questions (FAQ)