Xiaomi phone is stuck on startup the screensaver of inclusion – what to do in 2026?

You turned on a Xiaomi smartphone, but instead of the usual desktop, the Mi logo or download animation froze on the screen? This problem is familiar to many owners of the brand's devices, from budget Redmi Notes to flagship Xiaomi 14. The reasons can vary from accidental system failure to critical firmware damage. The main thing is not to panic and not to try to immediately carry the phone to the service center. In 80% of cases, the problem can be solved independently, even without special skills.

In this article, we’ll look at all the possible causes of Xiaomi’s hanging on the screensaver, from simple software failures to hardware malfunctions. You’ll get step-by-step instructions with illustrations for each recovery method, from soft reboot to flashing through Fastboot. We’ll also explain how to avoid repeated crashes and when to really contact specialists. If your Redmi, POCO or Mi doesn’t respond to buttons, doesn’t charge or reboots cyclically, here you’ll find a solution.

Why Xiaomi is stuck on the logo when it’s turned on?

Slasher getting stuck (or so-called bootloop) is a condition where a smartphone cannot fully boot the operating system, and the reasons fall into two big groups: software (you can fix them yourself) and hardware (require repairs).

• 🔄 Failed software update - interrupted firmware installation through OTA or MIUI Updater often causes damage to system files.
• 📱 Application conflict – viruses that are incorrectly installed APK or "heavy" games can disrupt the boot section.
• 🔋 Critical battery discharge – if the phone is off at 0% and lies for a long time without charging, the power controller can block the boot.
• 🛠️ Incorrect resetting of settings – an error-free reset via Recovery or an interrupted process leads to “broken” system files.
• 💥 Physical damage – falls, moisture or overheating can damage the motherboard or memory (eMMC/UF).
• 🔌 Charger problems – unoriginal cables or power supplies sometimes cause a fault with the charging controller.

Devices with unlocked bootloader and custom firmware are particularly vulnerable. For example, owners of POCO F3 or Redmi Note 10 Pro often experience freezes after installing unofficial cores or modified versions of MIUI. Also at risk are smartphones that have not been updated for a long time - outdated firmware can conflict with new applications.

Updates MIUI|Installation of the annex|Battery discharge|Falls/blows|The other.-->

Next Next post: What to do if Xiaomi doesn’t turn on beyond the logo

Before you start complex manipulations, follow the basic steps that often help bring your phone back to life:

1. Hard reboot (forced reboot) Press the power button for 10-15 seconds until the screen goes out. Then try turning the phone back on, which works if the system is temporarily getting stuck.
2. Charging check. Connect the original cable and power supply, leave at least 30 minutes on charge. Sometimes the phone doesn't turn on because of a deep discharge, even if the indicator shows charge.
3. Remove the SIM and memory card. Turn off the phone (if it responds to a button), take out the tray and try to turn it on again. Damaged memory cards can block the download.

If these actions didn't work, go to more serious methods, but first check if the phone is responsive to the connection to the PC:

• 🖥️ Connect Xiaomi to your computer via USB. If the device is defined as Qualcomm HS-USB QDLoader 9008 or MediaTek Preloader, which means that the phone is in emergency mode (EDL) And it can be restored through the firmware.
• 🔍 If the PC makes a connection sound but the phone doesn’t show up in Device Manager, try another cable or port. USB 2.0 (they work better with emergency modes).

Check charging response |Extract SIM and microSD |Try another USB |Connect to PC for diagnosis |Plug the power button for 15+ seconds-->

Attention! If the phone is warming up, making unusual sounds (squeaking, coding) or artifacts (strips, flickering) appear on the screen, don't try to sew it yourself. These are signs of hardware damage, and further manipulation can exacerbate the problem.

Method 1: Log in to Recovery Mode and reset settings

If Xiaomi reacts to buttons but doesn’t load beyond the logo, try resetting and resetting.This method works on most models, including the Redmi 9, POCO X3, Mi 11, and others.

How to log in to Recovery:

1. Turn off the phone (press the power button for 10-20 seconds).
2. Press the button combination: 📱 For most models: Nutrition + Loudness up. 🔄 For older devices (e.g., Redmi) 4X): Nutrition + Loudness up + Loudness down.

Mi

Recovery

In Recovery, use volume buttons for navigation and power buttons for selection. If the menu is in Chinese, navigate by icons:

• 🔄 Reboot – Reboot (try this first).
• 🧹 Wipe Data – Resetting settings (deleting all data!).
• 📥 Connect with MiAssistant – Connect to a PC for firmware.

Important: If the phone doesn’t turn on after the reset, it means that the system files are damaged and a deeper repair is needed (firmware via Fastboot or EDL).

Method 2: Fastboot Firmware (for unlocked bootloader)

If the reset didn’t work, the next step is to run the firmware through Fastboot, which is suitable for devices with an unlocked bootloader (if you previously unlocked the bootloader via the Mi Unlock Tool).

• 🖥️ Windows computer 10/11 (For the Mi Flash Tool).
• 🔌 Original. USB-cable (better from the set).
• 📁 Fastboot firmware for your model (download only from the official Xiaomi website).
• 🛠️ Utility: Mi Flash Tool, Qualcomm or MediaTek drivers (depending on the processor).

Step-by-step:

1. Download and install the Mi Flash Tool. Unpack the archive with the firmware in a folder without Cyrillic characters (for example, C:\Xiaomi\fastboot_rom).
2. Turn off the phone. Press Power + Volume down to enter the Fastboot (there will be a bunny in a hat-eared on the screen).
3. Connect your phone to your PC. In Device Manager, check that the device is identified as Android Bootloader Interface.
4. Open the Mi Flash Tool, press Select and point the path to the firmware folder. Select Clean all or Clean all and lock (if you want to lock the bootloader after you have firmware).
5. Press Flash and wait until the process is complete (usually 5-10 minutes).

Warning: Fastboot removes all data on your phone, including photos and apps. If your device had important files, try non-reset recovery methods first (see next section).

💡

Before you run the firmware, check the phone model! Install the wrong firmware and the phone will turn into a brick. The model can be recognized by the sticker under the lid or through the fastboot getvar product command in the terminal.

Method 3: Recovery through EDL (for "bricks")

If Xiaomi doesn't respond to any buttons, charges or detects in Fastboot, it's the last chance, which is to run through EDL (Emergency Download Mode), which is a hardware-level mode that can be activated and can work even when the firmware is completely dead.

• 🔓 Authorized Xiaomi account (for new models from 2022).
• 💻 Special cable EDL (or the ability to sell a resistor into USB-plug-in).
• 📦 Firmware for EDL (Often a paid version is required from service centers).

How to log into EDL:

1. Turn off your phone (if it reacts).
2. Close the Test Point contacts on the motherboard (disassembly required) or use a jumper cable on the D+ and D-.
3. Connect your phone to your PC. The Device Manager should have Qualcomm HS-USB QDLoader 9008.
4. Use the Mi Flash Tool or QFil for firmware (instructions depend on the processor model).

Attention! Firmware via EDL on new models (Xiaomi 13, Redmi Note 12 and later) requires authorization through the Xiaomi server. Without official access (for example, through a service center), the phone will not be able to flash – this is protection from illegal repairs.

Method 4: Data recovery if Xiaomi is not enabled

If your phone had important files (photos, contacts, documents) and a reset or firmware deletes them, you can try extracting the data before you restore the system.

• 🔌 Connection as an external drive. If the phone is identified in Fastboot, sometimes the command helps: fastboot oem usb-config fs After that, a removable disk with files can appear in Device Manager.
• 📁 Use of the TWRP. If the phone has custom Recovery installed (for example, TWRP), You can connect it to the PC and copy files through MTP.
• 🛠️ Reading via eMMC chip. In service centers, data can be extracted directly from the memory chip (expensive but efficient).

Important: Don’t use dubious programs like Dr.Fone or Tenorshare – they often don’t work with Xiaomi because of the data encryption in MIUI.

💡

If the phone is encrypted (a pattern lock or PIN was installed), it is almost impossible to extract data without loss. The encryption in MIUI is tied to a hardware key that is reset when you are firmware.

When do I contact the service center?

Not all problems can be solved by yourself.

• 💥 The phone is physically damaged (cracks on the board, traces of oxidation, bloated capacitors).
• 🔥 Artifacts appear on the screen (strips, flickering, broken pixels) - this is a sign of a malfunction of the display or graphics chip.
• 🔋 The phone does not charge even after replacing the cable and power supply (possibly damaged power controller).
• 🚫 Firmware through EDL You need to be logged in and you don’t have access to official Xiaomi tools.
• 📱 After all the manipulations, the phone still does not turn on or cyclically restarts.

The cost of repairs in Xiaomi service centers depends on the problem:

Tip: Before visiting the service, back up your IMEI (if the phone is switched on at all). To do this, type in the dial *#06# and take a picture of the screen. This will help avoid network problems after repair.

How to avoid Xiaomi hanging on the logo in the future?

To prevent your Xiaomi from becoming a brick, follow the simple rules:

• 🔄 Update the firmware only through official channels (Settings) → The phone. → System updates: Avoid "custom" firmware unless you are sure of its stability.
• 📱 Do not install applications from unknown sources – they may contain viruses that damage system files.
• 🔋 Keep an eye on battery charge. Do not allow full discharge (below 5%) and do not use non-original chargers.
• 🛡️ Regularly back up through Settings → Additionally. → Backup and Reset or Mi Cloud.
• 🚫 Don't interrupt the upgrade process. If the phone is being updated, don't turn it off or remove the battery (even if the process is taking too long).

Fun fact: MIUI 14 and later added Safe Boot, which automatically restores the system after a crash. If your Xiaomi supports this version, upgrade - this will reduce the risk of freezes.

💡

Want to test firmware stability? Install AccuBattery and watch the discharge schedule. Abrupt jumps can indicate software problems.

FAQ: Frequent questions about Xiaomi hanging on the logo