How to get a root rights on Xiaomi Redmi 9T: Safe Instructions with Unlocking of the Loader

Getting root rights on Xiaomi Redmi 9T This process involves unlocking the bootloader, installing custom recavators and modified firmware — every step is critical. Errors can lead to a device blink or loss of warranty. MIUI 12/13/14 model-wise M2010J19SG/SY.

Important: Since 2023, Xiaomi has tightened its bootloader unlock policy – now it requires linking a Mi Account to a device for at least 168 hours (7 days) before the procedure begins.

all the data

The root rights process consists of 3 key steps: preparation (backup, allowed settings), unlocking the bootloader through the Mi Unlock Tool, and installing Magisk to manage superuser rights. We will look at each step with the pitfalls of a particular model in mind.

1.Preparation of the device: what to do before unlocking

Before starting the procedure, you need to perform several critical actions. First, create a complete backup of data through Settings. → Google → Backup or third-party utilities like Titanium Backup (requires root, but can be used on another device). MIUI In Settings → About the phone - for Redmi models 9T current firmware based on Android 10/11.

Pay special attention to the linking of the Mi Account:

• 📱 Register a Xiaomi account (if not) and log in on your phone.
• 🔗 Link the phone number to your account in Settings → Mi Account.
• ⏳ Wait 7 full days from the first peg is a must for Xiaomi.
• 🔒 Enable account data synchronization (in case of blocking).

Also, disable all security features that may prevent unlocking:

1. Go to Settings. → Password and security and disable Find Device (Find device).
2. In the same section, deactivate the protection. MIUI (if included).
3. Turn on Developer Mode: Tap 7 times on Version MIUI In the About Phone section, then go back to Settings. → Additionally. → For developers and activate debugging by USB and Unlocking OEM.

⚠️ Note: If you are using two-factor authentication in your Mi Account, make sure you have access to backup codes. Once the bootloader is unlocked, Xiaomi may request confirmation via SMS email.

💡

Before unlocking the loader, check IMEI Devices (type *#06#) and save it. In rare cases, recovery may be required after the procedure. IMEI through the engineering menu.

2 Unlock the bootloader through the Mi Unlock Tool

Xiaomi’s official Mi Unlock Tool is the only legal way to unlock a Redmi bootloader 9T. Download it from the official website (the version should be no lower than the previous one). 5.5.224.30 compatible MIUI 14). Install the program on a Windows PC 10/11 (on macOS/Linux It's not working).

Algorithm of action:

1. Get Redmi on board. 9T PC through the original USB-cable.
2. Launch the Mi Unlock Tool on behalf of the administrator.
3. Log in to the same Mi Account as on your phone.
4. Click Unlock Now and the program will check the status of the device.
5. If the message “Waiting for 168 hours” appears, wait for the deadline to expire (7 days).
6. After successful verification, press Unlock and confirm the action.

The unlocking process will take 5-10 When it's done, it automatically reboots to Fastboot mode, and all data will be erased!

⚠️ Note: If the Mi Unlock Tool gives an error "This device is not supported", check the model in Settings → The phone. → A model for Redmi. 9T Only versions are supported M2010J19SG (global M2010J19SY (For the Chinese versions (M2010J19SC) A roundabout method with global firmware will be required.

Installation of custom recaveri (TWRP) for Redmi 9T

After unlocking the loader, it is necessary to install a modified Recovery — TWRP (Team Win Recovery Project, which will allow you to stitch ZIP-Root-right files. 9T use the version TWRP 3.7.0 or later, adapted to the device code name lime.

Installation instructions:

• 📥 Download the image TWRP For lime from the official website twrp.me.
• 🖥️ Rename the file to twrp.img And put it in a folder with ADB/Fastboot (You can download it as part of Platform Tools).
• 🔌 Connect your phone in Fastboot mode (clip the power supply) + Loudness down when switched on).
• 📋 Open the command line in the folder with ADB Next Post:Fastboot Flash Recovery twrp.img fastboot boot twrp.img

If TWRP If you boot successfully, you'll see a touch-controlled menu. Don't restart the device right away. You'll need to flash Magisk first, or the stock receptacle will overwrite. TWRP.

4. Getting root rights through Magisk

Magisk is a versatile tool for obtaining root rights without violating system integrity (without the SafetyNet trigger). 9T fitting 26.4 Download the file. Magisk-v26.4.zip From GitHub and transfer it to your phone via MTP into TWRP.

Step-by-step installation:

1. On the menu. TWRP Choose Install → point the way Magisk-v26.4.zip.
2. Swipe to Confirm Flash (Swipe to Confirm Flash)
3. After completion, press Reboot System.
4. Install. APK-Magisk file (download it from the same GitHub) for root rights management.

To check the success of the installation:

• Open the Magisk app – a green tick should be on the top of the screen.
• Launch the terminal and type the command: su If a request for rights appears, the root works.

⚠️ Attention: On Redmi 9T s MIUI 14 can fire anti-Rollback protection, blocking firmware from older versions of Magisk. Use only current builds (26.0)+) avoiding "brick".

5. Checking the health and bypass SafetyNet

After obtaining the root rights, many applications (such as banking or Google Pay) can block work due to SafetyNet.

• 🔍 Install MagiskHide Props Config module via Magisk (Modules section).
• 📱 In Magisk settings, activate MagiskHide and add problematic apps to the list.
• 🔄 Restart the device and check SafetyNet status through the app YASNAC (available in Play Market).

For Redmi. 9T It is also a very important problem with MIUI Optimization, which can cause lags after you get the root, to turn it off:

1. Install the Disable module MIUI Optimization from the Magisk repository.
2. Reboot the phone.
3. Check the smoothness of the interface in Settings → The phone. → Version. MIUI (tap 3 times according to the version for the performance test).

💡

On the Redmi. 9T root-rights cannot be installed OTA-You'll lose your root or your brik, and you'll need to manually stitch all updates through the standard menu. TWRP.

6. Alternative methods of obtaining root without unlocking the bootloader

If the bootloader is not unlocked via the Mi Unlock Tool (for example, due to the “Waiting for 168 hours” error), you can try workarounds. MIUI via MTK Su (only for MediaTek Helio processor devices) G80, redmi-equipped 9T).

Instructions for experienced users:

1. Download. APK-file MTK Su (available on forums) 4PDA).
2. Install the application by pre-enabled installation from unknown sources.
3. Launch it. MTK Su and follow the instructions on the screen (reboot required).
4. Once you receive the root, install Magisk for rights management.

Advantages of the method:

• ✅ Does not require unlocking the loader.
• ✅ Stores data on the device.

Disadvantages:

• ❌ It doesn't work on all versions. MIUI (on MIUI 14 may not work).
• ❌ High risk of soft brik when making a mistake.
• ❌ Manual patching requirement boot.img.

⚠️ Attention: Method C MTK Su exploits firmware vulnerabilities that Xiaomi can close in new updates. MIUI through the standard menu!

7 Risks and how to minimize them

Obtaining Root Rights on Redmi 9T There are several critical risks involved:

• 🚨 Loss of warranty: Xiaomi cancels warranty when unlocking bootloader.
• 💥 "Brick Devices: Firmware errors can make your phone inoperable.
• 🛡️ Security vulnerabilities: Ruth opens access to system files for malware.
• 📵 Communication problems: Some firmware after the root disappears LTE or wifi.

To reduce the risks:

1. Use only proven sources for downloading TWRP and Magisk (official websites).
2. Before firmware, check the hash amounts of files (MD5) via HashMyFiles utility.
3. Do not remove Xiaomi system applications without a backup.
4. Update Magisk and its modules regularly.

If your phone stops turning on (brick), try restoring it using the Mi Flash Tool:

• Download stock firmware for Redmi 9T Xiaomi.
• Unpack the archive and launch the Mi Flash Tool.
• Connect your phone in EDL mode (this may require a testpoint).
• Select Clean All mode and press Flash.

💡

If after firmware Magisk phone is stuck on the logo MI, clamp down on power. + Volume up on 10 You can do it for a forced reboot. If that doesn't work, run the stock. boot.img via Fastboot.

8.What to do after obtaining a root license

Now that you have a root, you can optimize Redmi. 9T And here are some useful things:

• 🧹 Remove embedded software: Use Titanium Backup or SD Maid to uninstall unnecessary system applications (e.g. com.miui.analytics).
• ⚡ CPU overclocking: Kernelsu module allows you to fine-tune Helio frequencies G80 (carefully - overheating!).
• 🎮 Game modifications: Install GFX Tool to unlock FPS in games (e.g. in games) PUBG Mobile or Call of Duty).
• 🔋 Battery Charge Limit Module Limits Charge to 80% to Extend Battery Life.

For safety reasons, it is recommended:

1. Install AFWall+ to control network traffic of applications.
2. Use MagiskHide to hide the root from banking applications.
3. Regularly check the integrity of system files TWRP (mount → System).

Remember, with root rights, you take responsibility for the stability of the device. If you plan to sell the phone, return it to a runoff state through the Mi Flash Tool.

💡

On the Redmi. 9T Root-rights can activate hidden functions MIUI, For example, Ultra Battery Saver (saves up to 30% charge) or Game Turbo 2.0 for gamers.

FAQ: Frequent questions about root rights on Redmi 9T