Xiaomi smartphone owners often face the limitations of the standard MIUI shell, which does not allow you to remove system applications or fine-tune the work of the processor. For the Redmi 5 Plus model, based on the Snapdragon 625 processor, obtaining superuser rights opens access to hidden Android functions. This allows you not only to remove preinstalled software, but also to install specialized modules that improve autonomy and performance.
The procedure for obtaining Root rights requires care, as it involves interference with boot parts of the system. Errors during the unlocking stage of the bootloader can lead to loss of warranty or inoperability of the device. However, following proven algorithms, you can safely modify the software part of your Redmi 5 Plus without the risk of turning the gadget into a brick.
Before you start taking action, you need to realize that the standard manufacturer warranty for root access is often canceled. However, many users take this step for the sake of complete freedom of management of the operating system. In this article, we will discuss current methods that are suitable for the architecture of your device.
Preparation of the smartphone for system modification
The initial phase is critical, as any manipulation of system partitions requires a full backup of data. Move all important photos, contacts and documents to your computer or cloud storage. In the process of unlocking the bootloader, which is mandatory for installing Root, the device will be completely reset to factory settings.
You will need to create a Mi Account and link it to your device. This is a requirement of Xiaomi for permission to unlock. Go to your account settings and make sure that your phone number and email are confirmed, otherwise the unlock service will not give the required code.
You also need to activate the developer mode. To do this, go to Settings → About Phone and quickly click on the MIUI version seven times. After that, a new "Developers" item will appear on the menu, where you need to enable USB debugging and USB installation permission.
⚠️ Warning: Make sure the battery is at least 60-70%. Interrupting the firmware or unlock process due to battery discharge can damage the boot sector.
The final step of preparation will be downloading drivers ADB You can use the Mi Unlock Tool, you can use the Fastboot on your computer, you can't use the original diagnostics interface without these components. USB-cable that came in the kit to avoid connection problems.
☑️ Checking readiness for Root
Unlocking the bootloader (Bootloader)
Unlocking Bootloader is the first technical step to make changes to system partitions, without which custom recaps or superuser rights are impossible, and requires waiting, as Xiaomi artificially limits the waiting time after the account is linked.
You usually have to wait 7 to 168 hours (one week) after you have linked your account. If you try to unlock your device ahead of schedule, Mi Unlock will give you an error stating the remaining time.
To start, turn your smartphone into Fastboot mode. Turn the device off completely, then press the power and volume buttons at the same time. The screen will show an image of a rabbit repairing an android, indicating a successful transition to the desired mode.
Connect your phone to your computer and start the Mi Unlock Tool. Sign in using the same Mi Account that's attached to your smartphone. Press Unlock and confirm the action. The device will reboot, and the unlocking process will begin, which can take a few minutes.
Installation of custom TWRP Recovery
Standard Recovery Menu in the MIUI It has limited functionality and does not allow third-party installation ZIP-archives or root access. For full modification, you need to install TWRP (Team Win Recovery Project. This menu allows you to make full system backups, clear cache and install modified files.
The recovery.img image file should be tailored to your model. Redmi 5 Plus (codename vince) has different versions depending on the version of Android (Nougat or Oreo), and using an incorrect file can result in a recovery touchscreen or a complete system failure.
The firmware is run through the computer in Fastboot mode. Connect the phone that has been switched to this mode to the PC. Open the command line in the folder with the installed ones. ADB-drivers and enter a command to firmware the image:
fastboot flash recovery twrp-3.x.x.x-vince.imgIt is important to avoid automatic system reboot immediately after firmware, as a standard MIUI loader can rewrite custom Recovery back to stock, so once the fastboot command is complete, you need to manually press the power and volume buttons to go to the installed TWRP menu.
⚠️ Note: At the first loading in TWRP The system can request a screen unlock password, and if you don't remember it or type it incorrectly, the data partition will be unreadable, and then you'll need to format Data, which will delete all the files.
After successfully logging in to TWRP, it is recommended to immediately back up the current firmware (Boot, System, Data) – a “lifeline” that will return the phone to its original state in case of critical errors during further configuration.
What happens if TWRP doesn’t start?
Magisk installation to get a Root
The current standard for superuser rights is Magisk. Unlike the legacy SuperSU, it is systemless, which allows you to bypass security checks in banking applications and games. For Redmi 5 Plus, it is the most optimal solution.
Download the current version Magisk.apk Rename the file extension to.zip (for example, Magisk-v26.0.zip). Upload this file to the internal memory of the smartphone or on SD-Then, you're on the menu. TWRP, Go to the "Install" section (Installation).
Select the downloaded archive and slide it through to confirm the installation. It takes a few seconds. Once completed, a successful installation message will appear. You must press the "Reboot System" button to restart the device as normal.
When you load the operating system, you'll see a Magisk icon in the app menu. Open the app. If you have a version number at the top of the screen and you have a green "Magisk: Installed" sign at the bottom, then the Root rights are successfully activated and are working correctly.
💡
Magisk allows you to hide the presence of root rights from specific applications through the Magisk Hide function, which is critical for the operation of banking programs.
Rights verification and access management
Once installed, you need to make sure that the apps do get the privileges, and you can download a tester like Root Checker, and run the test, and the app will confirm that the superuser has the rights.
Access control is done through the Magisk app. When any application requests root access for the first time, a permission pop-up will appear on the screen, and you can choose to "Give," "Refuse," or "Give Forever."
Magisk also has a "Zygisk" feature that integrates Magisk code into all Zygote processes, which allows for more advanced modules. For Redmi 5 Plus, enabling this option may slightly increase RAM consumption, but it does extend customization options.
If an application doesn’t work properly with the rights enabled, you can add it to the Denis List, which will make the system hide the fact that root modifications are available for that application, which often solves problems with running bank software or Google Pay (now Google Wallet).
Possible problems and solutions
The Redmi 5 Plus can be difficult to modify, and the most common problem is Bootloop, which occurs when an incompatible Magisk module is installed or the system partition is damaged.
To exit the bootloom, you need to re-enter TWRP (pressing the power and volume). From the menu, select "Advanced" → "File Manager" and remove the problem module from the /data/adb/modules folder. If this does not help, you will need to restore from the backup or completely reflash the stock firmware.
Another common problem is the loss of wide-angle content (Widevine L1), which causes streaming services (Netflix, Amazon Prime) to stop showing content in HD quality. Unlocking the bootloader often resets the level of protection to L3.
| Problem. | Probable cause | Method of decision |
|---|---|---|
| Cyclical reboot | Conflict of the Magisk module | Removal of the module via TWRP |
| Touch doesn't work in TWRP | Wrong version of Recaveri | Firmware of the correct image recovery |
| No network after firmware | Loss of modem partition | Recovery of the EFS/Modem backup |
| Blocking of Mi Account | Not completed before discharge | Entering a password from Mi Account when downloading |
Always stay calm and follow instructions. Most problems are reversible if you have access to recovery mode and a backup of important data. Don't be afraid to experiment, but do it consciously.
⚠️ Warning: After unlocking the bootloader, some security features, such as "Device Search" or level-level protection against theft MIUI, It may not work properly or be disabled.