How to Get Root Rights to Xiaomi Redmi 7A: A Complete Guide to Security

Xiaomi Redmi 7A is one of the most popular budget smartphones, but its capabilities are limited by standard MIUI firmware. Getting root rights opens up access to hidden functions from removing embedded software to installing custom firmware. However, the process comes with risks from losing warranty to “bricking” the device.

In this guide, we will break down three officially supported methods for getting root on Redmi 7A (codename pine) relevant for 2026: through Magisk, TWRP and alternative tools. Particular attention will be paid to bypassing Xiaomi’s new restrictions on unlocking the bootloader that appeared after the MIUI 12+ updates. If you are a beginner, start with the section on preparation, where we will list all the necessary software and explain why you should not skip backup.

Preparing for root: what to do before you start

Before you start unlocking the bootloader and installing Magisk, make sure all the preliminary steps are followed. 90% of root problems arise from missed preparations - from the wrong version of drivers to the wrong firmware.

Here is the minimum checklist before starting:

Pay special attention to MIUI versions. On the Redmi 7A with Chinese firmware (CN), it can take up to 360 hours (15 days) to unlock the bootloader due to Xiaomi's policy. Global/EEA releases are faster - usually in 72 hours. Check the current version in the Settings menu → About Phone → MIUI version.

⚠️ Attention: If your Redmi is 7A It was purchased in 2023-2026, and it's likely to have an anti-rollback bootloader locked on it. MIUI Check the current version of the rollback command: fastboot getvar anti If the value is higher than 3, use only firmware with the rollback version not lower than the current one.

Method 1: Unlock the bootloader via Mi Unlock Tool (official method)

The official tool from Xiaomi – Mi Unlock Tool – the only legal way to unlock the bootloader on the Redmi 7A. However, since 2022, the company has tightened the requirements: now you need to link the Mi Account to the device and wait up to 7 days.

Step-by-step:

1. Link your Mi Account: Go to Settings → Xiaomi Account → Sync and make sure the device is tied. Without this, the Mi Unlock Tool won’t start the process.
2. Turn it on. OEM-Unlock: In the Developer Menu, activate the option OEM Unlocking. If it's not, update it. MIUI last-minute.
3. Launch Mi Unlock Tool: Download the utility from the official website, log in to your Mi Account and connect your phone in Fastboot mode (clip Volume Down + Power).
4. Wait for confirmation: If the device is new, the tool will show a timer (from 72 to 360 hours).

Once the bootloader is successfully unlocked, the phone will display Unlocked when booted, and you can now install TWRP or Magisk.

💡

If the Mi Unlock Tool gives you a "Couldn't verify device" error, try using the 5.5.224.24 version of the utility (which works even with the new restrictions).

Method 2: Install Magisk without TWRP (for beginners)

Magisk is the most popular tool for obtaining root rights without replacing standard recovery. Its advantage is that it masks the presence of root from applications (such as banking or games). 7A Magisk version 26.4 is also available.+.

Instructions:

1. Download the latest version of Magisk from GitHub (Magisk-v26.4.apk file).
2. Patchit boot image: - Remove boot.img file from firmware for your MIUI version (you can download from Xiaomi Firmware Updater). - In Magisk, select Install → Select and Patch a File and specify the path to boot.img.
3. Fastboot: Fastboot Flash Boot magisk_patched.img fastboot reboot

After the reboot, the phone will have Magisk Manager, and check for root commands in the terminal.

su

If you see the #-root invitation, it is successful.

⚠️ Note: On some versions MIUI 14+ patch-stitch boot.img The phone may be stuck on the Redmi logo, so you need to flash the original logo. boot.img back and use the method with TWRP.

Method 3: Install TWRP and root through custom recovery

TWRP (Team Win Recovery Project) is an alternative recovery that allows custom firmware installation and root. There are informal builds for the Redmi 7A, but they require caution: some versions do not support data encryption.

How to install TWRP:

1. Download the correct version TWRP: For Redmi. 7A (Pine is suitable for the build from XDA-Developers (version) 3.7.0_12-0).
2. Fastboot: Fastboot Flash Recovery twrp-3.7.0_12-0-pine.img fastboot reboot recovery
3. Install Magisk via TWRP: Download Magisk-v26.4.zip, transfer to your phone and select the Install option in TWRP.

After installing Magisk, TWRP Don't forget to sew disable_forceencrypt.zip (If you use encryption, or the phone won't boot: XDA.

What to do if the root phone does not turn on (brick)

If the Redmi 7A stopped booting after root manipulation, don’t panic – 95% of the time, the device can be restored.

• 🔄 Soft brick: The phone vibrates when turned on but gets stuck on the logo MI Or it's loaded into a bootloop. Solution: flash the original. boot.img or to reset the data through TWRP.
• 🚫 Hard brick: The phone doesn't respond to buttons, it doesn't detect in fastboot. EDL-mode (emergency firmware via Qualcomm) HS-USB QDLoader 9008).
• ⚡ Anti-rollback brick: Occurs when you try to roll back to the old version MIUI. Solution: only replacement of motherboard (not regenerated software).

To recover through EDL, you will need:

1. Cable USB Type-C shorted to D+ and D- (or special) EDL-cable).
2. Mi Flash Tool and firmware for Redmi 7A in.tgz format.
3. Qualcomm HS-USB QDLoader 9008 (installs manually through Device Manager)

Risks and consequences of getting root on Redmi 7A

Root rights give you complete control over the system, but at the same time deprive you of a number of opportunities:

• 🔒 Loss of warranty: Xiaomi cancels warranty if unlocked bootloader or root is detected. Even after rollback to stock firmware, the service center can determine interference.
• 🛡️ Security issues: Root opens system files to all applications.Attackers can use this to steal data.
• 🎮 Blocking in games and banking applications: Google Pay, SberBank Online and PUBG Mobile refuses to work on rooted devices. MagiskHide doesn't always help.
• 🔄 Problems with OTA-Updates: After receiving root, automatic updates MIUI They'll stop working. You'll have to install firmware manually.

If you use your phone to work with sensitive data (internet banking, corporate mail), we recommend considering root alternatives:

• 📱 ADB-commands: Some system settings can be changed without root via adb shell (for example, disable ads in the system). MIUI).
• 🔧 Shizuku + App Ops: A tool for managing application permissions without root.
• 🔄 Rootless Custom Firmware: LineageOS or Pixel Experience, for example, offer “clean” Android without the need for rooting.

Root Alternatives: What You Can Do Without Unlocking the bootloader

Not all users need full root. Often, local superuser rights or ADB changes are enough. Here's what you can do without unlocking the bootloader:

• 🗑️ Removal of Bloatware: With the help of ADB System applications can be deactivated (e.g. com.miui.analytics to disable statistics collection): adb shell pm uninstall -k --user 0 com.miui.analytics
• 🔊 Sound setting: Apps like ViPER4Android It works without root on some versions. MIUI (Audio Modification Library).
• 📶 Changes to the firmware region: Through ADB region-change MIUI (for example, CN on Global) to get Google services: adb shell setprop persist.sys.locale en-RU adb shell setprop persist.sys.country RU

These methods do not require unlocking the bootloader, but you will need USB Debugging enabled and ADB access.

💡

If your goal is to remove embedded applications or change system settings, try root-free methods first. They are safer and not warranty-free.

FAQ: Frequent questions about root on Xiaomi Redmi 7A