Root rights to Xiaomi Redmi 7: a full guide from unlock to Magisk

Xiaomi Redmi 7 is still a popular budget smartphone, but its capabilities are very limited by stock firmware MIUI. Getting root permissions gives you access to fine-tuning the system, removing embedded software, and installing custom firmware, but the process requires care: a mistake at any stage can turn the phone into a brick. This guide provides proven methods for obtaining root rights for Redmi 7 in 2026, with the latest updates MIUI Changes in Xiaomi’s policy.

It is important to understand that unlocking the bootloader and installing Magisk (or alternative solutions) will void the warranty and may affect the stability of the device. Official (via unlocking the bootloader from Xiaomi) and alternative (using exploits to circumvent restrictions), also understand which firmware to choose for Redmi 7 (onc or onclite) and how to avoid typical installation errors. TWRP.

Preparation of the device: what to do before unlocking

Before you start rooting, you need to prepare Redmi 7 and your computer, and skipping any of these steps can cause you to crash or fail to complete the process.

On the smartphone side:

• 📱 Make a full backup of data (photos, contacts, messages) through Settings → Additionally. → Backup or third-party utilities like Swift Backup. Once the bootloader is unlocked, all data will be erased.
• 🔋 Charge the battery to at least 70%. interruption of the process due to battery discharge can damage the firmware.
• 🔓 Enable Developer Mode: Go to Settings → About the phone and 7 times click on the version MIUI. Then go back to Settings. → Additionally. → For developers and activate debugging by USB and Unlock. OEM.
• 📶 Connect to a stable Wi-Fi network. Downloading tools and firmware via mobile Internet may be interrupted.

On the computer side (Windows/Linux/macOS):

• 💻 Install. ADB Fastboot (for example, via Android) SDK Platform-Tools. Windows will also require Xiaomi drivers (you can download from the official website).
• 📁 Download the latest version of the Mi Unlock Tool (the official utility for unlocking the bootloader) from the Xiaomi website. Please note: the version of the tool must match your firmware.
• 🔗 Prepare. USB-cable with data transmission support (not all charging cables are suitable!).

⚠️ Note: If your Redmi 7 was purchased in China or has firmware for the Chinese market (China) ROM), The process of unlocking may be different, and in some cases, you will need to pre-sweep the global version. MIUI.

Unlock the bootloader: the official way from Xiaomi

Xiaomi allows you to unlock the bootloader, but the process has become more complicated than before. Now you need to link the Mi Account to the device and wait for confirmation (usually 7-14 days).

1. Sign in to Mi Account on your phone (Settings) → Xiaomi account: Make sure your account is confirmed by email and phone.
2. Link your account to your device: go to Settings → Additionally. → For developers → Mi Unlock status and click Add account and device.
3. Download and install Mi Unlock Tool on your PC. Run the program on behalf of the administrator and log in to the same Mi Account.
4. Connect Redmi 7 to your computer in Fastboot mode (turn off your phone, then press Volume down). + Meals before the appearance of the Mi Bunny logo in the Ushanka hat).
5. In Mi Unlock Tool, press Unlock. If you have a waiting message, wait. SMS or email notifications from Xiaomi (usually in 7 days).
6. Once confirmed, repeat steps 4-5. Unlocking will take 1-2 minutes, after which the phone will automatically restart and erase all data.

If the Mi Unlock Tool is running a "Couldn't unlock" or "Device not supported" error, check:

• 🔹 The instrument version (should be the last version).
• 🔹 Linking your account to your device (sometimes you need to repeat step 2).
• 🔹 The status of Xiaomi servers (at high load, unlocking may not work).

⚠️ Note: Once the bootloader is unlocked, Redmi 7 will receive updates MIUI Delayed (or not received at all) features, such as Find Device, will stop working.

Linked Mi Account to the device|Data backup made.|Installed ADB/Fastboot and drivers|Download the Mi Unlock Tool of the latest version|Phone's charged. ≥70%-->

Firmware selection: stock MIUI vs custom assemblies

Once you unlock the bootloader, you have to choose the firmware that will be installed root. Each option has pros and cons:

For most users, the best option is to stay on stock. MIUI And you can install Magisk to get root rights, which will keep the system stable and still have full control of the device, if you're annoyed by the abundance of ads and unnecessary apps in the system. MIUI, Look at the firmware on the base. AOSP (Pixel Experience, but be prepared for possible iron problems.

The firmware for Redmi 7 is divided into two versions: onc (standard model) and onclite (light version for some regions). If you install firmware not for your model, you will get a broken phone. → The phone. → Device model or via fastboot getvar product command.

💡

If you have chosen custom firmware, download NikGapps (an alternative to Google Apps) or OpenGapps for the app. ARM64, Android 11: Google's services won't work without them.

Installation TWRP and Magisk: A Step-by-Step Guide

To obtain root rights to Redmi 7 will require custom recavery TWRP Follow the instructions carefully, and an error at this stage most often leads to a brick».

Step 1: Installation of TWRP

1. Download the latest version TWRP Redmi 7 (onc or onclite) from the official twrp.me website or verified repository (XDA). The file must have the.img extension.
2. Place the downloaded file in the folder with the platform-tools (where installed) ADB/Fastboot) and rename it in twrp.img convenienceally.

Step 2: Magisk firmware

1. Download the latest Magisk (file) Magisk-vXX.X.zip) from official GitHub. Do not use third-source versions!
2. Transfer the Magisk archive to your phone (you can use it) ADB push or connect the device as a flash drive to TWRP).
3. V TWRP Select Install, find the Magisk archive, and confirm the installation. Once complete, press Reboot System.

Step 3: Checking root rights

After restarting, install the Magisk Manager app (download). APK You can use GitHub to check root status, and if it's successful, you'll see the green checkmark and the Magisk version.

⚠️ Note: If after installing Magisk, the phone is fixated on the Redmi logo, then the firmware does not support your version. MIUI. In this case, you need to run a compatible version. MIUI through TWRP (No data wipe!) and repeat the Magisk installation.

Solving Typical Problems After Getting Root

Even if you successfully install root rights, you may encounter a number of problems, and here are the most common ones and ways to solve them:

1.The phone does not pass SafetyNet

Many applications (e.g. banking or Pokémon GO) Check system integrity through SafetyNet:

• 🔧 Install MagiskHide Props Config and activate MagiskHide for problem applications.
• 🔧 In Magisk Manager, enable Enforce DenyList and add apps to the list.
• 🔧 Update SafetyNet Certificates with Universal SafetyNet Fix.

2. It's not working. OTA-update MIUI

After receiving root updates by air (OTA) They're not going to be fixed:

• 📲 Download full firmware (.zip) from Xiaomi and install them through the site TWRP (wipe!).
• 📲 Use the utility. MIUI bootloader for automatic search of current versions.
• 📲 For custom firmware (for example, LineageOS), updates come through the built-in updater.

3.The smartphone overheats or discharges quickly

This may be due to background processes that have been rooted.

• 🔥 In Magisk Manager, disable unnecessary modules.
• 🔥 Install Greenify or Brevent to manage background tasks.
• 🔥 Check the kernel settings (if you have installed custom) via Kernel Adiutor.

4. the fingerprint does not work, or NFC

This is a problem that is common in custom firmware.

• 👆 Go through the stock. MIUI root-preserving.
• 👆 Find it. XDA Developers patches for your firmware (e.g. fixes for Goodix or FPC scanner).
• 👆 For NFC Check if the module is enabled in the kernel settings.

1. Squeeze the stock firmware with the command fastboot flash all [file name].zip.

2 If it doesn’t work, use the Mi Flash Tool in clean all mode.

3.In extreme cases, contact the service center (but warn that the device has been unlocked).-->

Alternative methods of obtaining root without unlocking the bootloader

If official unlocking of the bootloader seems too difficult or Xiaomi refuses to unlock, alternative methods can be tried. MIUI, Sometimes they help you bypass the restrictions.

Method 1: DirtyCOW exploit (for the MIUI 10–12)

This method exploits a vulnerability in the Linux kernel and only works on older versions. MIUI. Instructions:

1. Download. APK-KingRoot or TowelRoot (can be found at the 4PDA).
2. Install the app and start the rooting process. If the exploit works, you get a temporary root.
3. Install Magisk Manager and run the full Magisk through temporary root.

⚠️ Risk: High probability of triggering MIUI-It also prevents you from permanently rooting your device.

Method 2: Firmware through EDL (Emergency mode)

If the bootloader is locked, but the phone does not turn on (for example, after a failed firmware), you can use the device. EDL-The Emergency Download Mode is required:

• 🔌 Special cable (EDL cable) or circuit of the circuit board.
• 🔌 Mi Flash Tool and stock firmware for Redmi 7.
• 🔌 Authorized Xiaomi Account (for new devices).

This method is complex and risky - it is better to use it in extreme cases or consult specialists.

Method 3: Use of patches for boot.img

If you have a damp boot.img You can patch it through Magisk Manager and flash it back:

1. Download the stock firmware for your model and extract it from it boot.img (for example, through MIUI bootloader).
2. Move it. boot.img Open the phone in Magisk Manager (Patch Boot Image option).
3. Squeeze the result. magisk_patched.img via Fastboot:

fastboot flash boot magisk_patched.img

This method does not require TWRP It works in most versions. MIUI.

Security after rooting: how not to lose data

Getting root rights opens up new opportunities, but it also increases security risks. Follow these guidelines to protect your data:

1. MagiskHide setup

• 🛡️ Enable MagiskHide in the Magisk Manager settings and blacklist banking apps, secure games (such as Genshin Impact) and services like Netflix.
• 🛡️ Install SafetyNet Fix module to pass inspections.

2. Backup with root

• 💾 Use Titanium Backup or Swift Backup to create full app and data backups (including system settings).
• 💾 Keep a copy of the folder regularly /data through TWRP or ADB pull.

3. Protection against malware

• 🦠 Install root-enabled antivirus (such as Malwarebytes).
• 🦠 Do not give root access to unknown applications.
• 🦠 Check the rights of applications through AppOps or XPrivacyLua.

Updating components

• 🔄 Regularly update Magisk and installed modules.
• 🔄 Keep an eye on the release of patches for your firmware on XDA Developers or 4PDA.

⚠️ Note: If you sell or transfer a phone after you get root, be sure to complete a full reset via the root. TWRP (Wipe → Format Data) and run the stock firmware, otherwise the new owner will be able to recover your data.

FAQ: Answers to Frequent Questions