You pick up your Xiaomi, you press the power button, and the screen stays black. No vibration, no sound, no MI logo. This is familiar to many owners of Redmi, POCO or Mi smartphones, especially after falls, battery drains or failed updates. But don't panic: 80% of the time, the problem is solved by a forced reboot without losing data.
In this article, we will look at all the working methods for restarting a dead Xiaomi phone, from basic to advanced (including Fastboot and EDL).We will discuss why the device does not respond to the on button when you carry it to the service, and when you can do without repair.
Important: if the Xiaomi phone is dead, try charging it for 15-20 minutes with the original network adapter cable (not from the PC!).
1. Hard Reset - a universal method
The simplest and safest method that works on all Xiaomi models (from Redmi 4X to Xiaomi 14 Ultra) is to simulate battery extraction, which resets temporary OS errors.
How to do this:
- 🔋 Charge your phone at least 5% (if the battery is completely discharged, a hard reset may not work).
- 🔘 Press the power button. + Volume up for 10-15 seconds.
- 📱 When the Mi logo or vibration appears on the screen, release the buttons.
- ⏳ Wait for full loading (can take up to 2-3 minutes).
If the screen remains black:
- 🔌 Connect the charger and repeat the procedure.
- 🔊 Try another combination: Nutrition + Loudness down (on some models) POCO).
- 🔄 If the phone vibrates but doesn’t turn on, hold the buttons until the second vibration signal (≈20 seconds).
Make sure the charging cable is in good working order |
Turn off your phone from your PC/laptop |
Use the original power adapter |
Try charging from another source (outlet, powerbank)-->
Why doesn't it work? If hard reset didn't work, it could be:
- 🔋 Fully discharged battery (you need to charge 30)+ minute).
- 💥 Hardware damage (fall, ingress of moisture).
- 🤖 Firmware failure (after update or manual intervention).
System updates |
Falls/blows|
Battery discharge |
By itself (for no apparent reason) |
The other.-->
2.Reboot via Recovery Mode (Recovery Mode)
If the hard reset doesn't work, the next step is to load into Recovery Mode, where you can reset your settings, check system integrity, or reflash your phone.
How to log in to Recovery:
- Turn off the phone (if it doesn’t respond, perform a hard reset, as in the previous section).
- Press Power + Volume up until the Mi logo appears.
- Release the Power button, but keep Volume up until you see the Recovery menu.
The recovery menu has options available:
| Option. | Action. | When to use |
|---|---|---|
| Reboot | Phone reboot | If the phone is stuck on the logo |
| Wipe Data | Reset to factory settings | When firmware fails or viruses |
| Connect with MiAssistant | Connecting to a PC for firmware | If the phone is not loaded into the OS |
| Mount | Connecting internal memory | To copy data through a PC |
Attention! Wipe Data removes all data (photos, contacts, apps) If your phone doesn't turn on but important files aren't synced to Mi Cloud, try connecting to your PC in Fastboot mode first (see section 4).
What happens if the Recovery Mode does not open?
3.Reboot via Fastboot (for advanced users)
Fastboot mode is a “service menu” of the phone that allows you to control the device through a computer. If Xiaomi does not turn on, but reacts to the connection to the PC (defined as Qualcomm HS-USB or Android Bootloader Interface), the chances of recovery are high.
How to log in to Fastboot:
- Turn off the phone (hard reset).
- Press Power + Volume down before the screen with the rabbit in the hat (Fastboot Mode) appears.
- Connect your phone to your PC via USB.
Further action depends on the problem:
- 🔄 Reboot: Enter PC Command Line: Fastboot Reboot
- 📱 Checking device: fastboot devices (should display the serial number of the phone).
- 🔧 Download the official firmware for your model from the Xiaomi Firmware website and execute: fastboot flash all [name file firmware.zip]
Important: To work with Fastboot you need:
- 🖥️ Installed Qualcomm or MediaTek drivers (depending on the processor).
- 🔌 Original. USB-cable (not all cables support data transfer to Fastboot).
- 🔒 Unlocked bootloader (if the phone has not previously unlocked, you will need to link the Mi Account).
1. Change. USB-port (better to use port) USB 2.0).
2. disable driver signatures in Windows (via gpedit.msc).
3. Use another cable (preferably from the Xiaomi kit).-->
Charging in a dead state: what to do if the battery is discharged
One of the most common reasons Xiaomi doesn't turn on is because of the battery's deep discharge, and today's lithium-ion batteries go into sleep mode when voltage drops below 3.2V, and standard charging doesn't help.
How to "resuscitate" a discharged phone:
- 🔌 Use the original adapter (minimum) 18W) — Cheap charging may not give enough current.
- ⏳ Charge at least 30 minutes before trying to turn on (even if the indicator does not burn).
- 🔋 Try battery training: Connect the charger for 5 minutes. Turn off and try to turn the phone on. Repeat 3-4 times - sometimes it "wakes" the power controller.
If the phone gets hot when charging
If the indicator does not light up after an hour of charging:
- 🔧 Check the cable and adapter on another device.
- 🔌 Try charging from another source (powerbank, other socket).
- 📱 Connect your phone to your PC – sometimes it’s detected and starts charging.
For firmware in EDL you will need:
- 🖥️ Mi Flash Tool (download from the official website of Xiaomi).
- 📄 Firmware for your model in.tgz or.mbn format.
- 🔧 Qualcomm drivers (manually installed via Device Manager).