Xiaomi won’t start after reset: 7 working ways to recover

Have you reset your Xiaomi settings, but the phone is persistently not turning on? Does the screen flash the Mi logo and turn off, or does the device freeze while you boot? This problem is familiar to many owners of Redmi Note 12, POCO X5 or older models like the Mi A2. The reasons can range from an incorrect reset through Settings to a damaged firmware after the upgrade.

In 80 percent of cases, the phone can be reanimated without a service center -- you just need to know the right sequence of actions. We put together 7 proven methods, including launching through Recovery Mode, firmware through Fastboot, and even hardware reset if the smartphone doesn't respond to buttons. Some methods require a computer, so prepare in advance. USB-cable.

If your Xiaomi after resetting:

• 🔄 Hanging on the logo. Mi/POCO and not loaded;
• 📵 Does not respond to charging or power button;
• 🔋 Discharged to zero and not turned on after connecting to the network;
• ⚠️ Shows a No Command or This error MIUI version cannot be installed,

This is a guide that will help bring him back to life, and let's start with the simplest solutions and gradually move on to the advanced ones.

1. Hard reset via buttons (Hard Reset)

If Xiaomi phone doesn’t turn on after resetting through the settings menu, try hardware reset first, which works even when the firmware is damaged, as it triggers the built-in Recovery service menu for recovery.

The instructions are suitable for all Xiaomi, Redmi and POCO models, including the new Redmi Note 13 Pro+ and Xiaomi 14. The main thing is to properly pinch the button combination. On older devices (until 2019) you may need Volume up + Power, on new ones – Volume up + Power (hold 10 + seconds).

Press Volume up + Power for 10-15 seconds |

Release buttons when the Mi| logo appears

Wait for the Recovery menu to load (can take up to 30 seconds) |

Select the language (if available) and the Wipe Data option

-->

In the Recovery menu, use volume buttons for navigation and power buttons for confirmation.

1. Wipe Data → Wipe All Data (complete reset);
2. Reboot → Reboot to System (Reboot).

⚠️ Note: If you select Wipe All Data and you have an E:unknown volume for path error, it means that the user data section is corrupted, and you will need to flash it through Fastboot (see section 4).

2. Starting in Safe Mode (Safe Mode)

Sometimes Xiaomi doesn’t start after a reset because of a conflict with installed apps or viruses, in which case the safe mode – diagnostic mode, where only system programs work – will help.

To download to Safe Mode:

1. Press and hold the Power button until the Mi logo appears.
2. Once the logo disappears, immediately press Volume down and hold until the phone boots.
3. In the lower left corner of the screen should appear the inscription Safe mode.

In safe mode:

• 🔍 Check if an application is interfering with the launch (especially if the reset was due to viruses);
• 📱 Remove suspicious programs through Settings → Annexes;
• 🔄 Restart your phone in normal mode.

💡

If the phone is stable in Safe Mode, the problem is with third-party software. Try to remember which apps you installed before resetting, and manually remove them.

3. Charging connection: what to do if Xiaomi is out of charge

One of the common reasons Xiaomi is dead after a reset is that it has a full battery drain. If the phone doesn't respond to buttons and doesn't turn on, check first:

• 🔌 Correct cable and power supply (try charging from another device);
• 🔋 Clean connector USB-C (Dust or oxidation can block charging);
• ⚡ Charging indicator (on some Redmi models, when connected, the red LED lights up).

If the indicator is not on, try forced charging:

1. Connect your phone to the original charger.
2. Hold the power button for 30 to 60 seconds (even if there is no reaction).
3. Leave the device on charge for at least 1 hour - sometimes the power controller blocks the onset at a critically low charge.

⚠️ Note: On Xiaomi models with Qualcomm Snapdragon processor (for example, POCO F5, Redmi K60) In deep discharge, the power protection can work, in which case only a connection to a PC via Qualcomm will help. HS-USB QDLoader 9008 (see Section 6).

Resetting through settings|Updates MIUI|Battery discharge|Custom firmware installations|Other causes-->

4. Firmware via Fastboot (for power users)

If the reset didn’t help and the phone is stuck on the logo or shows an error This MIUI version cannot be installed, you will need to flash it through Fastboot.

• 📱 Devices with damaged firmware;
• 🔄 Smartphones that don’t start after a failed update;
• 🔧 Phones with an unlocked bootloader (bootloader).

You'll need:

• 💻 Windows computer (or Mac/Linux fixed ADB/Fastboot);
• 🔌 Original. USB-cable;
• 📁 Firmware for your model (download from the official Xiaomi website).

Step-by-step:

1. Unpack the firmware in a folder with Fastboot (for example, C:\platform-tools).
2. Turn off your phone and put it in Fastboot mode: Press Volume Down + Power.
3. Connect Xiaomi to a PC and check for device detection by the command: fastboot devices If the phone is not identified, install Qualcomm or MediaTek drivers (depending on the processor).
4. Run the firmware command: fastboot flash all (new models may require fastboot update name file.zip).

5.Recovery via Mi Flash Tool (for "bricks")

If Xiaomi after reset turned into a “brick” (does not respond to buttons, is not determined in Fastboot), Mi Flash Tool will help - the official utility from Xiaomi for restoring firmware in EDL mode.

The Mi Flash Tool only works with the bootloader unlocked! if the bootloader is locked, first get permission to unlock through the Mi Unlock Tool (can take up to 72 hours).

Instructions:

1. Download and install the Mi Flash Tool.
2. Unpack the firmware for your model (.tgz or.zip format).
3. Put your phone in EDL mode: For Qualcomm: Press Volume Up + Volume Down + Power and plug into your PC. For MediaTek: short circuit testpoints required (disassembly needed).

Mi Flash Tool

Refresh

Flash

⚠️ Attention: Firmware through EDL erases all data, including IMEI on some models (e.g. Redmi) 7A, Mi 8 Lite. Upon recovery, check IMEI *#06# and restore it through the engineering menu if necessary.

6. Hardware reset via testpoints (last chance)

If none of the methods worked, there is a hardware reset through testpoints – physical closure of contacts on the board to force the transition to EDL mode. This method requires disassembling the phone and is suitable only for experienced users.

Which models support this method? Mostly old Xiaomi on Qualcomm processors:

• 📱 Redmi 4X/5/5A/6/6A;
• 📱 Mi A1/A2;
• 📱 POCO F1.

On new devices (such as the Redmi Note 12 Pro+), testpoints are often missing or protected.

How do I find test points?

1. Remove the back cover and disconnect the battery.
2. Find two contacts on the motherboard that are labeled EDL or TEST POINT (usually next to the battery connector).
3. Close the contacts with tweezers or wires, while connecting the phone to the PC.

💡

On some models (for example, Redmi Note 8 Pro) test points are hidden under the screen, so to avoid damaging the plumes, it is better to contact the service center.

7. Contacting a service center: when nothing helps

If all of these methods have failed, the problem may be:

• 🔋 Faulty battery (swelling, short circuit);
• 🔧 Damaged motherboard (after falling or getting moisture);
• 📱 A burnt memory chip (eMMC or UFS).

In these cases, self-repair is impossible - diagnostics are required in the service center.

• 📍 Search by map;
• 💰 Average cost of diagnosis: 500-1500 ₽;
• ⏱ Repair time: 1 day (battery replacement) to 2 weeks (board repair).

⚠️ Note: Before visiting the service, back up your data if the phone is at least somehow responsive to the connection to the PC. In some cases, specialists can recover files even from a dead device via Chip-Off (direct memory reading).

💡

If Xiaomi doesn’t turn on after a reset, try Hard Reset and charging first. Only if it doesn’t work – go to the firmware via Fastboot or EDL. Self-repair of the board is fraught with final breakdown!

FAQ: Frequent questions about Xiaomi launch after reset