How to log in to Xiaomi after resetting without a Google account: all the working ways of 2026

Resetting a Xiaomi smartphone to factory settings is standard procedure when selling, troubleshooting or preparing a device for a new owner. However, after such a reset, users often face blocking FRP (Factory Reset Protection), an Android security system that requires entering data from a Google account that was previously associated with the phone. If you forget your username / password or bought a used device without the previous owner’s data, this lock becomes a serious problem.

In this article, we will look at all the current methods of bypassing FRP on Xiaomi in 2026, from official solutions to technical loopholes running on Redmi Note 12/13, POCO X5/F5, Mi 11/12 and others. Importantly, not all methods are universal – their effectiveness depends on the version of MIUI and the type of processor (Qualcomm or Mediatek), We will indicate which devices are suitable for each method so that you do not waste time on useless attempts.

Why Xiaomi requires a Google account after a reset

FRP (Factory Reset Protection) was introduced by Google in Android 5.1 Lollipop as a measure against device theft.

• 🔒 When you first turn on your smartphone, you link your Google account to it.
• 📱 After resetting through Settings → Reset or Recovery System Requires Owner’s Rights to Be Confirmed.
• 🚫 Without entering the login / password from the associated account, access to the device is blocked.

On Xiaomi, this protection is reinforced by additional measures: some models (Redmi Note 10 Pro, POCO F3) request not only a Google account, but also Mi Account, a branded Xiaomi account.

💡

If you buy used Xiaomi, always ask the seller to unplug both accounts (Google and Mi) before the reset. Once the data is deleted, this cannot be done without bypassing FRP.

It is worth noting that with the release of MIUI 14 and Android 13/14, Xiaomi has tightened protection: some methods that worked on older versions (for example, through TalkBack) have ceased to function, so below we will focus on current methods tested on firmware from 2023-2026.

Preparing for FRP bypass: What to do before you start

Before you start unlocking, follow the mandatory steps:

Define the model and version MIUI|Check the type of processor (Qualcomm/Mediatek)|Charge your phone at least to the minimum. 50%|Prepare. OTG-cable ADB|Download the required files (see instructions below)-->

To find out the model and firmware version on the locked device:

1. Turn off the phone.
2. Press Volume Up + Power to Enter Fastboot.
3. Connect to your PC and use the command: fastboot getvar product This will show an exact model (e.g. munch for POCO F4).

The type of processor can be determined by the model:

• 🔹 Qualcomm Snapdragon: Redmi Note 12 Pro+, POCO F5, Xiaomi 13.
• 🔹 Mediatek Dimensity/Helio: Redmi Note 12, POCO X5 Pro, Xiaomi Civi 3.

The type of chipset depends on the method of circumvention. SP Flash Tool, and for Qualcomm — EDL-regime ADB-team.

Method 1: Bypassing FRP through Mi Account (official method)

If a Mi Account was attached to the device, it can be used to unlock without Google, a method that works on all Xiaomi models, but requires access to an email/phone linked to the account.

Instructions:

1. On the FRP lock screen, select the Other Login Method (or Forgot pattern).
2. Slip on Sign in via Mi Account.
3. Enter the email or phone number associated with the account.
4. Confirm the login via SMS or backup email.
5. After authorization, the device unlocks and you can configure it as new.

⚠️ Warning: If you are not an account owner, this method will not work.Any attempt to match your password will result in a temporary blocking of Mi Account.

The advantage of this method is that it does not require technical skills and does not violate the warranty, but it is suitable only for those who have access to the original Mi Account.

Method 2: Using EDL mode for Qualcomm smartphones

For devices on Qualcomm Snapdragon (most flagships and mid-budget models Xiaomi) there is a method of unlocking through the EDL-Emergency Download Mode allows you to flash your device without checking. FRP, It requires PCs and special tools.

Tools required:

• 🖥️ Windows computer 10/11.
• 🔌 Cable USB (original or high-quality).
• 📁 Firmware for your model (download from the [Xiaomi Firmware Updater](https://xiaomifirmwareupdater.com)).
• 🛠️ Mi Flash Tool or QFil.
• 🔑 File. authentication.xml (new devices).

Step-by-step:

1. Turn off the phone.
2. Hold the Loud up. + Volume down and connect the cable USB The device will go to the PC. EDL-The screen will remain black (the screen will remain black).
3. Install Qualcomm HS-USB QDLoader 9008 drivers (you can download from Driver Signature Enforcement Disabler).
4. Open the Mi Flash Tool, select the downloaded firmware (file with the extension.tgz).
5. Press Refresh – the program must detect the device in the COM port.
6. Select Clean All mode and press Flash.
7. Wait for the firmware to finish (5-10 minutes) and the phone will automatically restart without FRP.

⚠️ Note: On devices with a locked bootloader (Redmi Note 11 and later) before the firmware through EDL You need to unlock the bootloader through the Mi Unlock Tool. SLA Auth Error.

Where to get authentication.xml? This file is generated when you unlock the bootloader through the official Mi Unlock Tool. If you do not have access to the original Mi Account, you will have to look for alternative ways (for example, through services like FRP Bypass Tools, but they are paid and not always legal).

Method 3: Bypass FRP through ADB (for Android 11 and below)

On Android 11 and older devices (e.g., Redmi Note 10, POCO X3 Pro) you can bypass FRP via ADB (Android Debug Bridge), which requires USB debugging enabled, but you can’t activate it on a locked device.

Instructions:

1. On the FRP lock screen, turn on TalkBack (usually available through Special Options in the unlock menu).
2. Draw the letter L on the screen to open the global menu.
3. Select TalkBack Settings → Help and Feedback.
4. Slip on the Privacy Policy - the browser will open.
5. In the address bar of the browser enter https://bit.ly/3xFRPBypass (or any other short or URL s ADB-instruction).
6. Download and install. FRP Bypass APK (for example, FRP_Bypass.apk).
7. Launch the app and follow the instructions to reset FRP via ADB.

⚠️ Attention: MIUI 13/14 Android 12/13 This method often fails because of the closure of vulnerabilities. 12, POCO F5) Use the Method 2 (EDL) method 4 (SP Flash Tool).

If ADB-The method worked, after unlocking necessarily:

• 🔧 Turn off TalkBack in the settings.
• 🔄 Reset your settings again through Settings → Reset.
• 📱 Set up your device as new without linking your old Google account.

Method 4: SP Flash Tool for Mediatek smartphones

Devices on Mediatek processors (Redmi Note 12, POCO X5 Pro, Xiaomi Civi 3) unlock through the SP Flash Tool. This tool allows you to flash the device bypassing FRP, but requires caution - wrong actions can turn the phone into a "brick".

Files required:

• 📁 Firmware (Stock) ROM) For your model in.zip format.
• 🛠️ Programme SP Flash Tool (version 5.2 or later).
• 🔌 Mediatek Preloader Drivers.
• 🔐 File. authentication_agent.bin (new devices).

Step-by-step:

1. Unpack the firmware in a folder on your PC. MTxxxx_Android_scatter.txt (where xxxx is the chipset model).
2. Open the SP Flash Tool, click Choose and select the scatter file.
3. In the Authentication File section, indicate the path to authentication_agent.bin (if required).
4. Turn off your phone and connect it to your PC without pressing buttons (should be defined as Mediatek Preloader).
5. In SP Flash Tool, press Download. The firmware will start automatically.
6. Once completed (green tick) turn off the phone and turn it on.FRP will be reset.

⚠️ Note: On some models (Redmi Note 12) 5G) firmware SP Flash Tool can lead to loss of IMEI. To avoid this, make a backup copy of the partition before firmware. NVRAM assisted MTK Client.

💡

SP Flash Tool is the only working method for Mediatek devices on MIUI 14. However, it requires a precise firmware match to the phone model. Using the wrong firmware will cause the device to fail.

Where to download the firmware? Official files can be found on the sites:

• 🔗 [Xiaomi Firmware Updater](https://xiaomifirmwareupdater.com)
• 🔗 [MIUI Downloads](https://new.c.mi.com/global/miuidownload/index)

Avoid third-party sources – they may contain viruses or modified firmware.

Method 5: Bypassing FRP through Test Point

For devices where software methods do not work, there is a hardware bypass FRP This is a test point, and it's a short circuit on the motherboard, so you can get into the circuit. EDL-Even with a locked loader.

⚠️ Warning: This method requires disassembling the phone and knowing exactly where Test Point is, and an error can damage the board!

Instructions for Redmi Note 11 (example):

1. Turn off the phone and remove the back cover (need a mediator or suction cup).
2. Unscrew the screws and gently disconnect the battery plume.
3. Find Test Point – these are usually two metal dots next to the charging connector, labeled as EDL or TP.
4. Close the points with tweezers or a needle, simultaneously connecting USB-plug-in.
5. The phone will go to EDL-Next, use the Mi Flash Tool (see Method 2).

📌 Important: The location of Test Point is different for each model. POCO X3 Pro points are located under the metal screen next to the processor, and for Redmi 10 - near the connector. SIM-Look for diagrams for your model in forums like 4PDA or XDA Developers.

After successfully logging into the EDL, run the device as described in Method 2. This method is guaranteed to bypass FRP, but is risky for beginners.

What to do if nothing works: alternative solutions

If all of the above methods have not worked, consider the following options:

• 🔧 Contact the Xiaomi service center: Official centers can reset FRP on request, but will require proof of purchase (check, box.
• 💻 Use paid services: There are online services (for example, FRP Unlock Tool, which is 10–30$ They remotely unlock the device. The risk of fraud is high -- just choose the sites you've checked.
• 📱 Buy an unlock code: On sites like UnlockJunky or DoctorSIM, you can order an unlock code. FRP down IMEI. Cost: 5-20$, But it doesn't work on all models.
• 🔄 Sell the device for spare parts: If the phone can not be unlocked and its cost is below 5000₽, Sometimes it is more profitable to sell it as a display donor / battery.

Before choosing a paid service, check reviews and reputation. Fraudsters often ask for payment for "guaranteed unlocking" and then disappear. Target services with a guarantee of a refund.

If you decide to sell a locked phone, indicate in the ad:

• 📌 Model and condition of the device.
• 📌 Reason for blocking (FRP post-discharge).
• 📌 Price 30-50% below the market (buyers will unlock their own).

FAQ: Frequent questions about FRP bypass on Xiaomi