How to turn off Xiaomi in a bootloom: Safe methods for all models (including Redmi and POCO)

A Xiaomi logo-hungry or endlessly rebooting smartphone is a problem that even power users face. Bootloop is caused by firmware failure, a failed update, application conflict, or hardware malfunctions. The main difficulty is that the device does not respond to standard shutdowns: Holding the power button or key combinations often fail.

In this article, we will discuss 5 proven methods to turn off Xiaomi, Redmi or POCO in the bootloom — from the simplest techniques to forced stop via Fastboot. Importantly, the wrong actions can aggravate the problem, so follow the instructions strictly by steps. If the smartphone does not respond to anything, at the end of the article you will find tips for diagnosing hardware malfunctions.

What is a bootloop and why does it appear on Xiaomi

Bootloop is a state where a Xiaomi smartphone gets stuck in the on-on phase. Instead of booting the system, the device either restarts endlessly or hangs on the MI, Redmi or POCO logo. The reasons range from software failures to critical hardware errors.

The most common causes of bootloop:

• 🔄 Failed update MIUI — interrupted firmware or version conflict (e.g. transition from MIUI 13 on MIUI 14 through OTA).
• 📱 Installation of custom firmware - an incompatible version TWRP or firmware from another device.
• ⚡ Rooting Failure – Magisk Errors or Incorrect Change of System Files.
• 🔋 Critical battery discharge – if the battery is discharged to 0% during the upgrade.
• 🛠️ Hardware malfunctions – damage to the motherboard, oxidation of contacts or failure of flash memory.

The first step is to determine if it's a software bootloop or a hardware one. If the smartphone has any response to buttons (vibrates, flashes the indicator), the problem is probably in the software. If not, it may be damaged by the hardware.

Method 1: Forced Reset (Hard Reset)

The simplest method is forced rebut via long power button holding, which works on most Xiaomi models if the bootloop is caused by a temporary failure rather than a serious firmware error.

Instructions:

1. Hold the power button for 15-30 seconds (on some models - up to 40 seconds).
2. If the smartphone vibrates or the screen goes out, release the button.
3. Wait 1-2 minutes and try to turn the device on again.

On non-removable battery models (such as the Xiaomi 12T or Redmi Note 11), this method works 60-70% of the time.

⚠️ Warning: Don't confuse forced reboot with factory reset (wipe) - the first method just turns off the device, the second method deletes all data!

Method 2: Turn off via Recovery Mode

If forced reboot doesn’t work, the next step is to enter Recovery Mode, a method that is suitable for devices that respond to buttons but don’t boot into the system.

How to log in to Recovery:

1. Turn off your smartphone (if it doesn’t turn off, hold the power until vibration occurs).
2. Click the combination: For most models: Power + Volume Up. For older devices (e.g. Redmi 4X): Power + Volume Down.

Mi Recovery

From the Recovery menu, select Reboot → Power Off (volume buttons, power buttons, and power buttons) if you don’t, just select Reboot system now — sometimes it helps you get out of the bootloom.

If the Recovery smartphone goes into the bootloom again, try connecting it to charging for 15-20 minutes, and then try again.

💡

If the Recovery menu displays characters, the smartphone has switched to Chinese mode. To return English, select the last item in the list (usually a language reset).

Method 3: Shutting down via Fastboot (for advanced users)

If Recovery Mode is not available or helps, the next step is to use Fastboot mode.This method requires connecting the smartphone to your computer and installing ADB/Fastboot drivers.

Instructions:

1. Install Platform Tools on PC (includes fastboot).
2. Turn off your smartphone (forced if it doesn’t react).
3. Press Power + Volume Down until the screen with the rabbit and the Fastboot inscription appears.
4. Connect the device to the PC via USB.
5. Open the command line in the folder from fastboot and type: fastboot devices If the device is determined, type: fastboot reboot poweroff

⚠️ Attention: Regime EDL This is designed for firmware through specialized tools (for example, Mi Flash Tool), which can permanently put the smartphone out of action!

Method 4: Removal of the battery (for models with removable battery)

If your Xiaomi is a removable battery model (like the Redmi 3S, Redmi 4A or Mi Max), the most reliable way to turn it off in a bootloom is to physically turn off the power.

How to do this:

1. Remove the back cover (a plastic shoulder blade or mediator will be required).
2. Carefully disconnect the battery plume or remove the battery (if it is not glue).
3. Wait 2-3 minutes - this will discharge the capacitors on the board.
4. Install the battery back and try to turn on the smartphone.

On models with a non-removable battery (for example, Redmi Note 5 and later), this method is not applicable - you will have to use other methods.

Method 5: Battery discharge to 0% (last resort)

If none of these things work, the last option is to completely drain the battery, and this method works because at zero, the smartphone automatically shuts down, but it takes a long time and can be dangerous to the battery.

How to defuse Xiaomi in a bootloom:

1. Turn off the smartphone from charging.
2. Leave it in the bootloom for 12-24 hours (depending on the model).
3. Check periodically to see if the screen is gone.
4. After full discharge, connect to the charging and try to turn it on.

This method is suitable for devices that do not respond to any combination of buttons.

• ⚡ Deep discharge can damage the battery, especially on older models.
• ⏳ On some smartphones (for example, POCO F1) The bootloops can continue even with a discharged battery.
• 🔌 If after discharging the smartphone does not turn on, it is possible that the motherboard is damaged.

💡

Discharge to 0% is a last resort, only use it if other methods have not worked, and be prepared for a possible battery replacement.

What to do if nothing helps: diagnostics of hardware malfunctions

If the smartphone is still in the bootloom and does not respond to any action, the problem may be in the hardware.

• 🔥 The smartphone is very hot even when turned off.
• 💥 When connected to the charger, you can hear clicks or the smell of burning.
• 🔌 The charging indicator does not burn, although the cable is serviceable.
• 📱 The screen remains black, but the device vibrates when you press the buttons.

In such cases, self-repair is not possible - diagnostics are required at the service center. Typical issues include:

If you suspect a hardware malfunction, don’t try to stitch the device – this could make the problem worse.

FAQ: Frequent questions about the bootloop on Xiaomi