How to turn off the got stuck smartphone Xiaomi if the battery is not removable: all working ways

Xiaomi’s hanging smartphone is a situation that almost every owner of Xiaomi devices has faced, especially when the phone stops responding to touch and the battery is fixed: you can’t just take out the battery, like in older models. In this article, we will discuss 7 proven ways of forced shutdown that work on all modern Xiaomi, Redmi, POCO and Black Shark devices, from the budget Redmi Note 12 to the flagship Xiaomi 14 Ultra.

The main problem with hanging out is the risk of data loss or system damage if you do not act correctly, and we will tell you which methods are safe and which should be used only as a last resort, and you will learn how to avoid repeated freezes and what to do if the phone does not turn on after a forced shutdown.

Important: If your device is stuck while updating your firmware through MIUI Recovery, do not use the methods in this article – this can lead to a “brick” (complete failure), in which case a special recovery procedure is required via Fastboot or EDL.

1. Standard Forced Reboot: Button combination

The most versatile and secure way is to reboot hardware with physical buttons, which works on 99% of Xiaomi devices, regardless of the model and version of MIUI.

Instructions:

• 🔄 Press the power button and the volume button at the same time.
• ⏳ Hold them for 10-15 seconds (on some models, 8 seconds is enough).
• 📵 The screen will go out and the phone will start to reboot (may vibrate).
• 🔄 After the logo appeared MI release the buttons.

If this method does not work, try an alternative combination:

• 🔇 Press the power button and the volume down button for 10-12 seconds.
• 📱 In some models (for example, POCO F5) This combination triggers the Fastboot menu, but if you hold it longer, the phone will shut down.

Make sure the phone is not just slow, but really getting stuck (no longer than 2 minutes of touch response)|

Try connecting the charger - sometimes the freeze is connected to a discharged battery |

If the screen is black, but the phone vibrates when you press the buttons, it may not be a freeze, but a problem with the display.|

Remember the time of freezing (needed to diagnose the causes)-->

⚠️ Note: Do not use this method more than 1 time per day. Frequent forced reboots can damage the file system, especially if the freeze occurred during data recording (for example, when installing an application or updating an application).

2. Alternative button combinations for different models

Some Xiaomi devices have unique combinations for forced shutdowns, and here is a table with the latest data for popular models:

If your model isn’t in the table, try the standard combination from the first section: On new devices (released after 2022), Xiaomi has unified the forced reboot process, so the difference between the models is minimal.

💡 Useful tip: If your phone is stuck while playing or using a resource-intensive app (like Genshin Impact or Call of Duty Mobile), try pressing and holding the power button separately for 20 seconds before restarting.

Yes, several times | Yes, but only after the update | No, never | I'm hard to answer-->

3. turn off via the Recovery menu (if the phone is partially responsive)

If the screen is not completely got stuck, but just brakes or does not respond to touch, but the buttons work, you can try to log into Recovery Mode and turn off the device in a regular way.

Instructions:

1. Turn off the phone (see section 1).
2. Press the power button and the volume button at the same time.
3. Hold on until the MI logo and Recovery menu appear (usually 5-7 seconds).
4. In the menu, select Reboot → Power Off with volume buttons.
5. Confirm the choice of the power button.

⚠️ Warning: Do not select Wipe Data or Factory Reset in Recovery, this will lead to complete data loss! Also do not update the firmware through Recovery if the phone got stuck during the previous update - this can exacerbate the problem.

If the Recovery menu is in Chinese (relevant for devices purchased in China), look for characters (reboot) and (off).

4.Use of ADB-Teams (for advanced users)

If you have access to a computer and debugging is enabled USB (USB Debugging, you can turn off the got stuck phone through ADB (Android Debug Bridge is a good method if the screen is unresponsive, but USB-port.

Instructions:

1. Connect your phone to your PC through USB-cable (preferably original).
2. Open the command prompt (CMD in Windows or Terminal in macOS/Linux).
3. Enter the command to check the connection: adb devices If the device is determined, you will see its serial number.
4. Execute the command to force shutdown: adb shell reboot -p or (if the first command did not work): adb shell input keyevent 26 (emulates the press of the power button).

If ADB does not see the device:

• 🔌 Try another one. USB-cable.
• 🔄 Reinstall Xiaomi drivers on PC (you can download on the official website).
• 📱 Check if the debugging is included USB Developer’s settings (if the phone is responsive at least a little).

💡 Useful advice: To avoid problems in the future, turn on debugging USB In advance: Go to Settings → The phone. → Version. MIUI (Press 7 times to activate Developer Mode, then in Settings → Additionally. → For developers → Debugging by USB.

5. Battery discharge as a last resort

If none of these methods work, the only option is to wait until the battery is completely discharged, which can take anywhere from a few hours to a day, depending on the charge level and model.

How to speed up the process:

• 🔋 Connect the phone to a knowingly broken charger (for example, a broken power bank) – this will create the illusion of connection and speed up the discharge.
• 📶 Turn on the mobile Internet (if the phone is even slightly responsive) and start downloading a large file (for example, a video in the Internet). 4K).
• 🔦 Direct a bright light (for example, a flashlight) to the phone – the light sensor can activate the screen, which will speed up the discharge.

⚠️ Attention: Complete discharge of lithium polymer batteries is harmful to their health:

• 🔌 Charge your phone to 100% before turning on.
• 📱 Do not use it immediately after turning on - let the battery "rest" for 10-15 minutes.
• 🔄 Perform 1-2 full charge/discharge cycles to calibrate the battery.

If the phone doesn't turn on after it's discharged, plug it into charging for 30 to 60 minutes, then try to turn it on. If the MI logo appears and disappears, this is a sign of damaged firmware, you'll need to flash it over Fastboot.

6 What to do if the phone does not turn on after switching off

If you force the device to shut down, don't panic. Here's a step-by-step plan.

1. Check the charging: 🔌 Connect the original charger for 30-60 minutes. 🔋 Try another charger or cable (preferably with Quick Charge support). 📱 If the charging indicator is not on, check the port for damage.
2. Perform "hard" reset: 🔄 Press the power button. + volume increase by 20-30 seconds. 📵 If the Fastboot menu appears, select Reboot.
3. Check the heating: 🔥 If the phone is too hot after freezing, let it cool for 15-20 minutes before turning on. ❄️ Do not cool it in the refrigerator – a sharp temperature drop can damage the battery.

If nothing works, there may have been a firmware damage or a hardware failure.

• 📱 Try to reflash your phone via Fastboot (instructions are on the forum) XDA Developers or 4PDA).
• 🔧 Contact the Xiaomi service center (if the phone is guaranteed).
• 🛠️ If the warranty is over, find a proven repair service Xiaomi (the cost of diagnosis is from 500 rubles).

7.How to avoid hanging out in the future

To minimize the risk of re-hangs, follow these guidelines:

• 📱 Update the firmware: Install the latest stable version MIUI through settings → The phone. → System Update: Avoid beta unless you are an experienced user.
• 🧹 Clean the cache: Clean the app cache regularly in Settings → Annexes → Application management → Clear the cache.
• 🚫 Remove Troubled Apps: If the freeze occurred after installing a specific app (such as TikTok, Facebook or games), remove it.
• 🔋 Watch the battery: Avoid discharges below 10% and overheating (do not play heavy games while charging).
• 🛡️ Use antivirus: Scanner like Malwarebytes or built-in MIUI Security will help you find malware.

💡 Useful advice: Include error logs in MIUI:

1. Go to Settings. → The phone.
2. Press 5 times on the Core (or the MIUI version if there is no "Core").
3. Enable Advanced Mode and Error Log.

This will help diagnose the cause of the hangings if they recur.

💡

If the phone is stuck during an OTA upgrade, NEVER force it to turn it off. Wait at least 2-3 hours - often the process ends on its own. Interrupting the update can lead to a "brick" (inoperability) of the device.

FAQ: Frequent questions about Xiaomi hangouts