How to turn off Xiaomi buttons: instructions for all brand devices

Have you ever encountered a situation where the touch screen Xiaomi stopped responding to touch, and the remote from the TV discharged at the wrong moment? MIUI In these cases, physical buttons become the only way to control the device, but how do you use them properly so that they don't make the problem worse?

In this article, we will go into detail all possible scenarios for turning off Xiaomi devices using hardware buttons, from standard procedures to emergency methods. TV without a remote, what to do if the smartphone does not respond to Power, and how to use key combinations to reset settings. We will pay special attention to nuances that are not written in the official instructions, for example, why some models require holding the buttons longer than 10 seconds, and what happens if you interrupt the shutdown process.

The material will be useful for both beginners and experienced users, we have collected information on all popular product lines, from the budget Redmi to the flagship Xiaomi 13, and also covered Mi TVs. TV And the Mi Band smartwatch, and if your device doesn't respond to standard methods, here's the solution.

Why a standard shutdown may not work

Before we get to hardware, it's important to understand why the device doesn't turn off in the normal way, and the reasons can be divided into three categories:

• 🔋 Software failures: Operating system freeze (MIUI Android TV), Application conflicts, or a failed firmware update, most often manifested by a frozen screen or cyclic reboot.
• 🔌 Hardware problems: Touch screen malfunction, power button plume damage, or battery failure (especially relevant for older Redmi Note models) 4/5).
• 📶 External factors: Discharged remote (for Mi) TV), mechanical damage to the body, or getting moisture under the buttons.

According to service center statistics, more than 60 percent of the "not-off" problems are caused by software failures that can be fixed without repair. The other 40 percent are split between hardware failures and external factors. If your device is in the first category, hardware buttons can help bring it back to life.

Please note that if the device is physically damaged (cracks on the screen, traces of oxidation on the board, a bloated battery), the use of hardware buttons can be dangerous.

How to turn off the Xiaomi Mi TV TV remote

Xiaomi Mi TVs TV (including the Mi models TV 4S, Mi TV Q1, Mi TV A2) They're equipped with a physical power button, but the location and functionality of the power button is dependent on the series:

1. Standard switch off button on the body

On most models, the power button is on the bottom or sidebar.

• 🔘 Mechanical (pressed with a characteristic click) – typical for older models (Mi) TV 3S, Mi TV 4A).
• 🔲 Touch (responds to touch) – modern TVs (Mi) TV Q2, Mi TV P1).
• 🔄 Joystick (button) + navigation – found on some models for the European market.

Instructions for switching off:

1. Find the button on the body (usually under the Mi logo or side).
2. Press and hold it. 5-7 seconds until the indicator starts flashing red.
3. Release the button and the TV will turn off.

If the button does not respond:

• 🔌 Check the power supply - it is possible that the cable has moved away from the socket or power supply.
• 🔄 Try hard reset: disconnect the TV from the network for 1 minute, then turn it back on.
• 🛠️ If the button is recessed or not pressed - you may need to disassemble the case (it is better to contact the service).

2. Emergency shutdown through the service menu

If the TV is stuck on the logo or doesn't respond to the button, you can try logging into the service menu. TV Android TV:

1. Press and hold the power button on the body 10-12 A few seconds before the recovery menu appears.
2. With Volume buttons (Volume) +/Volume -) Select the Power Off option.
3. Confirm the choice by a long press on the power button.

⚠️ Note: On some Mi models TV Long-term retention of the power button (more than 20 seconds) can cause a reset to factory settings. If you just need to turn off the TV, don't hold the button too long.

Turning off Xiaomi smartphones with buttons

Xiaomi smartphones (including Redmi, POCO, and flagship series) support several ways of hardware shutdown:

• 📱 It works but does not respond to the sensor. → Use a button combination.
• 🔄 Hanging on the logo. MIUI → forced-reset.
• 🔋 Discharged or not included → hardware-button.

1. Standard shutdown on the operating device

If the screen is not responsive but the device is on:

1. Hold the Power button (powers) 10-15 seconds until the shutdown menu appears.
2. If the menu doesn’t appear, try the Power combination. + Volume Up (holding) 8-10 seconds).
3. In the recovery menu, select Power Off using volume buttons and confirm the selection with the Power button.

For models with infrared port (for example, Redmi Note 8 Pro, Mi). 9T) You can try sending a shutdown command from another smartphone via the Mi Remote app, but this method only works if the device is not completely got stuck.

2. Forced reset (Hard Reset)

If the smartphone is stuck on the logo or does not react to anything:

1. Hold on to the Power. + Volume Down 15-20 seconds until the screen goes out.
2. Release the buttons and wait 30 seconds.
3. Press Power to turn it on.

💡

If the smartphone freezes on the logo again after a forced reboot, this may indicate firmware damage, in which case you will need to flash it through Fastboot or EDL regime.

For models with a non-removable battery (most modern Xiaomi), this method is safe. 3S) Frequent forced reboots can cause button wear.

3.Switching off through Recovery mode

If standard methods do not work, you can turn off the device through the recovery mode:

1. Turn off the smartphone (if it is on) by holding the Power.
2. Hold on to the Power. + Volume Up until the Mi Bunny logo appears in the Ushanka cap.
3. In the recovery menu, select Power Off (navigate with volume buttons, select with Power button).

⚠️ Warning: In recovery mode, do not press Wipe Data, this will lead to a complete cleanup of the device. If you just need to turn off your smartphone, choose only Power Off.

Features of switching off smart watches and bracelets Xiaomi

Xiaomi’s smartwatches and fitness bracelets (Mi Band, Mi Watch, Redmi Watch series) also support hardware shutdowns, but the process is different from smartphones.

1. Mi Band 5/6/7 Redmi Band

To turn off fitness bracelets:

1. Unplug the bracelet from the strap.
2. Find a small hole on the back with the inscription Reset.
3. Insert a paperclip or toothpick into the hole and hold it 5-7 seconds until the screen goes out.

This method also resets all bracelet settings, so use it only as a last resort. After turning it off to re-energize, plug the bracelet into charging.

2. Mi Watch and Redmi Watch 2/3

Xiaomi Smartwatches are turned off via the physical button:

1. Hold the side button for 10 seconds.
2. The menu will appear on the screen with options: Power Off, Reboot, Emergency Call.
3. Select Power Off and confirm your choice.

⚠️ Note: On the Mi Watch Lite and some budget models, long-term button retention (more than 15 seconds) can cause a complete reset, including step and pulse data.

Frequent Mistakes and How to Avoid Them

When you turn off Xiaomi devices with buttons, users often make mistakes that can make the problem worse.

• ⏱️ Insufficient button retention time: Many release buttons through 3-5 seconds, although it takes a few seconds to work. 10-15. This is especially true for Mi TVs. TV, where the touch buttons react with a delay.
• 🔄 Using the wrong combinations: For example, pressing Power + Volume Up on Xiaomi 13 will not cause a shutdown, but a login to Fastboot.Always check the combination for your model.
• 🔋 Shutdown during upgrade: If the device is updated (boot indicator is on), interruption of the process can lead to a "brick" (complete failure.
• 🛠️ Disassembly of the device without experience: Attempts to reach the power button through disassembly often end in damage to the plumes or disconnection of contacts.

To avoid mistakes, always follow the principle of "soft reset first, then hard." Start with simple methods (Power retention), and only if they do not help, move to button combinations or service menus.

💡

If a Xiaomi device doesn’t respond to buttons but it’s warming or vibrating, it’s a sign of hardware failure. Don’t try to turn it off by force: take it to a diagnostic service center.

When switching off buttons does not help

If none of these methods worked, it could indicate a serious problem, and let's look at the possible scenarios and solutions.

1.The device doesn't respond to buttons, but there are signs of life

Situation: The screen is black, but when connected to charging, the indicator lights up, or the device vibrates when you press the buttons.

• 🔌 Display problem: Connect your smartphone to your computer – if it’s defined as a device, it means the screen is faulty.
• 🔋 Battery Failure: If the device only turns on on charging but turns off when the cable is disconnected, a battery replacement is required.
• 📱 Firmware failure: Try logging into Fastboot (hold on Power) + Volume Down when enabled. If you can, reflash the device through the Mi Flash Tool.

2. Device completely dead (no reaction to charging, buttons, connection to PC)

In this case, it is possible:

• 🔌 Failure of the power supply (for TVs) or the charging controller (for smartphones).
• 🔥 Short circuit on the motherboard (often after falling or getting moisture).
• 🛠️ The collapse of the contacts of the power button or the power connector.

In such cases, self-intervention can only harm, the optimal solution is diagnostics in the service center, the average cost of diagnosis in official Xiaomi services is from 500 to 1500 rubles, depending on the device.

FAQ: Answers to popular questions