When a Xiaomi or Redmi smartphone screen suddenly lights up with a hare fixing an android, it often takes the owner by surprise. Many users are scared that the device is broken or has been subjected to a viral attack, but this is not the case. In fact, you just got into the system section of the Fastboot, designed for deep debugging and flashing the gadget.
Most often, it takes a few seconds to get out of this state and doesn't require a connection to a computer. The smartphone is completely functional, just software stuck in the standby mode of commands from the PC. In this article, we will discuss all the known ways to quickly and safely return to normal operation of the MIUI or HyperOS operating system.
Understanding the nature of this mode will help you avoid having to worry about it in the future, so let's look at why this happens and what actions you need to take right now to bring the phone back to life.
Why Xiaomi Phone Is In Fastboot Mode
Before you start fixing a problem, you need to understand why it's happening. Fastboot mode is a low-level interface that lets you send commands directly to a device's flash memory, and is usually used by engineers or advanced users to install customized recavers and flashing.
But 90 percent of the time, the average user gets there by accident, and the most common reason is mechanically pressing the buttons in your pocket or bag, and if you're holding down the volume button when you turn on or reboot, it's like you're telling you to go into debugging mode.
There are also software failures that can cause this effect:
- ⚡ Failure to update the operating system MIUI.
- ⚡ Installation of unsigned or damaged software.
- ⚡ Critical File System Errors After Device Falls.
- ⚡ Poor-quality repair or getting moisture on the plumes of the buttons.
The fastest way: reboot buttons
If your gadget is working, the standard exit procedure will take no more than 10-15 seconds.This method works on all models, from the old Redmi Note to the flagship Xiaomi 13/14.
You have to hold the Power button for a long time. On modern side-scanner models, the fingerprint is the same button. Hold it until the screen goes out completely.
Once the screen is out, don't let go of the button right away. Keep holding it for a few more seconds until you feel a slight vibration and see the Mi or Redmi logo, which means that the operating system boot process is running successfully.
☑️ Exit algorithm with buttons
Sometimes, if the battery is severely drained, this process may take longer, in which case the phone may first show a charging indicator, and only after gaining the minimum charge will it reboot.
Use of the computer and the Mi Flash Tool
In cases where the buttons do not respond or the phone is "hung" dead, you may need external intervention. USB-We will use the official Mi Flash Tool or ADB-team.
First, make sure that your PC has drivers for Xiaomi devices. Connect your phone that is in Fastboot mode to your computer. Windows Device Manager should have a device called the Android Bootloader Interface.
If you have an ADB and Fastboot console installed, you can send a forced restart command. Open the command line and type the following code:
fastboot rebootThis command sends a signal to the power controller, forcibly ending the Fastboot session. The phone should restart normally. If the standard command does not work, you can try a harder reset:
fastboot oem rebootWhat to do if your computer can’t see your phone?
Forced battery discharge
This method is considered a “last chance” when the software methods and buttons don’t work, and the point is simple: if the device doesn’t respond to commands, it will eventually shut down itself when the battery reaches zero.
Leave the phone with the image of the hare for a few hours or even a day. When the screen goes out due to the discharge, put the device on charge. Once the charge indicator appears, try to turn it on in the usual way.
⚠️ Attention: Deep discharge of lithium-polymer batteries is harmful to their chemical structure.Do not use this method regularly, as it reduces the total battery life of your smartphone.
Once the phone is turned on, it is strongly recommended to check the status of the battery and perform calibration, completely discharging and charging the device to 100% when switched off.
Table: Comparison of exit methods from Fastboot
So for the convenience of how we solve this problem, we've organized the data into a table that will help you quickly assess the risks and the effectiveness of each method.
| Method | Time required | Risk of data loss | Difficulty |
|---|---|---|---|
| Power button (15 seconds) | 15-30 seconds. | Absent. | Low. |
| Fastboot Team (PC) | 2-5 minutes | Absent. | Medium |
| Battery discharge | 6-24 hours | Minimum (AKB wear) | Low. |
| Recovery (recovery) | 30-60 minutes. | High (data erasure) | Tall. |
As you can see from the table, mechanical reboot is the safest and fastest option, and more sophisticated methods are only justified in the event of hardware button malfunctions.
What to do if the mode is constantly switched on
The situation changes dramatically if the phone goes back to Fastboot mode again and again after a successful reboot, which indicates a more serious problem that cannot be solved by a simple reboot.
First, check the physical condition of the volume buttons. If the Down button is stuck, oxidized, or has a mechanical defect, it will signal to enter debugging mode each time you turn on. Try gently pressing the button several times to "stir up" the mechanism.
💡
Try to gently (without fanaticism) tap your finger on the volume button area, sometimes helping to separate the stuck contacts if the cause is ingestion of sweet liquid or dust.
If the buttons are correct, the problem lies in the software part, it may be damaged bootloader or system files Android, in which case you will need to flash the device through Recovery mode or Mi Flash Tool with complete data cleaning.
⚠️ Warning: If the phone goes to the Fastboot immediately after turning on without your actions, this may be a sign of failure of the plume of the buttons or board.
Prevention and important nuances of working with Bootloader
To minimize the likelihood of a repeat of the situation, follow the simple rules of operation of Xiaomi gadgets. Do not carry the phone in tight pockets without a case where the buttons can be accidentally pinched.
Also worth mentioning is the unlocked bootloader. If you have unlocked Bootloader yourself to install custom firmware, the risk of accidentally hitting the Fastboot increases. Some custom recavators have bugs that can cycle the device back into this mode.
Keep an eye out for system updates. Xiaomi engineers regularly release patches that fix bugs in the bootloader and control buttons. The current version of MIUI or HyperOS is the key to stable work.
💡
Stable operation of volume buttons and the current version of the software are the main guarantees that you will no longer see the “hare” on the screen of your smartphone.