How to turn off safe mode on Xiaomi Mi 8 Pro: a step-by-step guide

Owners of Xiaomi’s flagship Mi 8 Pro sometimes face a situation where the smartphone launches in a special state known as Safe Mode after a reboot. In this mode, the corresponding inscription is visible on the screen, usually in the lower left corner, and most third-party applications become inaccessible or marked in gray. This is an Android system feature designed to diagnose problems, but for the average user it turns a powerful device into a simple “ringer”.

The emergence of safe mode on the Xiaomi Mi 8 Pro can be caused by various factors, from the accidental clamping of the volume buttons during the turn on to software conflicts of recently installed applications. Understanding the nature of this mode is the first step to its successful shutdown.

In this article, we will discuss in detail all possible ways to exit the diagnostic mode for the Mi 8 Pro. We will look at both standard reboot methods and deeper settings through the engineering menu and ADB if simple methods do not work.

Reasons for the appearance of safe mode on Xiaomi Mi 8 Pro

Before you start active actions to turn off the mode, it is worthwhile to understand what exactly provoked its launch on your Xiaomi 8 Pro. Most often this is due to a banal error of the user when restarting the device. If the volume buttons were clamped at the time of switching on the smartphone, the system regards this as a command to start the diagnosis.

Another common cause is software conflict: a newly installed application could have caused a critical error in the MIUI operating system, and in response, Android automatically starts in safe mode to prevent further data corruption or interface freeze, and can also be caused by corrupted system files after a failed update.

Sometimes the problem is hardware, like sticking buttons or a plume malfunction, so the phone can constantly "think" that the button is pinched and go back into debugging mode, so you should carefully examine the physical buttons of the device before you solve the problem.

⚠️ Warning: If Safe Mode appears cyclically after each reboot, this may indicate a serious firmware failure or physical damage to the control buttons.

For quick diagnosis of causes, you can use the following list:

• 🔍 Check if the volume or volume button is stuck.
• 📉 Remember if you have installed new apps in the last 24 hours.
• 🔄 Has the latest update of the system or firmware been interrupted.
• 🔋 Has the phone completely discharged before being turned off at the time of use.

Standard method of disconnection through the power menu

The easiest and safest way to turn off Safe Mode on the Xiaomi Mi 8 Pro is to use the regular shutdown menu. Unlike a regular reboot that just restarts the system, a full shutdown followed by turning on without the buttons clamped often resets the safe start flag.

Press the power button on the side of the device before the menu appears on the screen. In the window that appears, select the option to turn off or turn off. Wait for the full vibration and the screen to go out. It is important not to touch the volume buttons for 10-15 seconds after the screen goes out to avoid accidentally entering Recovery or Fastboot mode.

Once the device is completely off, press the power button again to turn on. At this point, it is critical not to touch the volume buttons. If you hold the volume button down when the Mi logo appears, the phone will start again in Safe Mode. Just wait for the desktop to load.

If you still have the Safe Mode message after you turn it on, try repeating the procedure, but this time hold the power button a little longer when you turn it off. Some versions of MIUI require a long press to confirm the action.

Use of notifications and hotkeys

Some versions of MIUI firmware for Xiaomi Mi 8 Pro have a built-in notification that hangs in the curtain during active safe mode.This is the fastest way to return to normal operation if a software failure has not blocked this feature.

Lower the notification curtain with a swipe from top to bottom. Find a notification with the text "Safe Mode On" or similar. Click on it and the system will suggest restarting the device to get out of this state. Confirm the action, and the phone will restart as normal.

If you don't have a notification, you can try the hot key combination, although it doesn't always work on modern Android versions. Try pressing the power button and the volume button at the same time for 10-15 seconds. This will cause a forced reboot. Immediately after the vibration, release all the buttons and wait for the boot.

It's worth noting that Hard Reset is different from resetting your settings, it doesn't delete your data, it just hardware restarts the phone's components, and it's a safe operation for the Mi 8 Pro.

Removing Conflict Applications Through ADB

If standard methods don’t work, it may be a problem with a specific application that runs with the system and blocks the normal exit from diagnostic mode, and because third-party applications don’t work (or partially work) in safe mode, you can try to remove or disable them.

This will require a computer with a Xiaomi driver installed. USB Driver and pack ADB (Android Debug Bridge. Connect your phone to your PC via USB-Turn on the debugging. USB In the Developer Menu (if it was previously enabled and is available in Safe Mode), if the menu is not available, this method may not work without first setting up.

Open the command line on your computer and enter a command to output a list of packages:

adb shell pm list packages

Find a suspicious app that you recently installed. Use the command to remove it:

adb uninstall name packet

For example, if you have installed a launcher or antivirus that may have caused the conflict, delete it. After deleting, execute the adb reboot command to reboot.

⚠️ Be careful when removing system packets through ADB. Remove only those applications that you installed yourself, otherwise you can disrupt the work. MIUI.

Resetting settings to factory as a last resort

When software bugs become critical and the Xiaomi Mi 8 Pro phone is stuck in safe mode forever, the only way out is a full data reset (Hard Reset), which will return the device to the “out of the box” state by removing all user data, photos, contacts and applications.

To reset through the Recovery menu:

1. Turn off the phone completely.
2. Press the Power button and the Volume Up button at the same time.
3. Hold them until the Mi logo appears, then let go of power, but keep the volume up.
4. In the menu that appears (Main Menu), select the language (English) with volume buttons and confirm with the power button.
5. Go to Wipe Data -> Wipe All Data -> Confirm.

Once the process is complete, select Reboot -> Reboot to System. The phone will take longer to boot as the initial system setup takes place.

💡

Wipe Data is a radical but guaranteed solution to the problem of stuck safe mode if other methods are powerless.

Prevention and Frequently Asked Questions (FAQ)

To avoid recurring problems on the Xiaomi Mi 8 Pro, it is recommended to keep an eye on the device’s memory.A crowded /data partition can cause crashes when you load Android services.Also try not to install apps from unverified sources and regularly update the system through Settings → About Phone → System Update.

If the volume buttons on your smartphone are backlashed or crashed, consider replacing the button plume at the service center. Mechanical closure of contacts is a common reason for spontaneously entering diagnostic modes.

💡

Before performing Hard Reset, be sure to back up your important data to Mi Cloud or your computer, as it will not be possible to recover it after a reset.