How to turn off Xiaomi device: from smartphone to smart home

Xiaomi devices are not just smartphones, but also an ecosystem of gadgets, from smart lamps to routers. Each requires the right shutdown to avoid disruption or data loss. For example, improperly turning off a smartphone during an upgrade can lead to a “brick” (complete inoperability), and a sharp pulling of the cord from the Mi TV to damage the matrix.

In this article, we will discuss all the current ways to turn off Xiaomi devices, from standard to emergency, pay special attention to situations when the gadget is getting stuck or does not respond to buttons, and learn which models support voice control to turn off and how to safely turn off the device through ADB (for advanced users).

Important: the shutdown procedure may vary depending on the version of MIUI (for smartphones) or firmware (for other devices).We have updated the data for 2026, but if your device is released before 2020, some menu items may be called differently.

1. Standard switch off of the Xiaomi smartphone (Redmi, POCO, Black Shark)

Most modern Xiaomi smartphones (Redmi Note 12 series, POCO F5, Xiaomi 14, etc.) are turned off via the power menu.

Press the power button for 2-3 seconds until the menu appears.
Click on the "Switch off" icon (usually marked with a symbol) ⏻).
Confirm the action if necessary.

On some models (such as Black Shark 5), the power menu can be opened by a combination of a power button + volume increase, which is done to protect against accidental pressing during games.

Close all applications|Turn off the charging.|Make sure there are no active updates|Save important data-->

If the screen doesn't respond to touch, but the smartphone is on, try plugging it into charging, which sometimes helps wake up the display. If the problem persists, go to the Forced Reboot section.

2. Shutting off the suspended smartphone Xiaomi (Hard Reset)

When Xiaomi’s smartphone is completely frozen and unresponsive, a forced reboot is required, a method that works on all models, including the Redmi 10C, POCO X5 Pro and Xiaomi 13T.

Instructions:

Press the power button + volume reduction for 10-15 seconds.
Wait for the vibration or the appearance of the Mi logo.
Release the buttons and the device will start to restart.

What to do if Hard Reset doesn’t work?

If the smartphone does not respond to the button combination, try: 1. Connect it to charging for 30 minutes, then try again. 2. Use the power button combination + increase in volume + decrease in volume (for some models 2018-2019). 3. Contact the service center if the device does not show signs of life (no vibration, charging indication).

Attention! Forced reboot doesn't delete data, but if the smartphone was in the process of updating MIUI, it could cause the system to crash, in which case you'd need to flash it over Fastboot.

3.Switch off Xiaomi TVs (Mi TV, Redmi TV)

Xiaomi TVs (Mi TV A2, Redmi Smart TV X, Mi TV Q2) are turned off via the remote or buttons on the case.

📺 Through the remote: press and hold the power button (⏻) 2-3 seconds until the dialog window appears. Select "Switch off".
🔘 Through buttons on the TV: press and hold the power button/Menu (usually located on the side or bottom before the menu appears.
⚡ Energy saving mode: some models (e.g. Mi) TV P1) They don't turn off completely, they go to standby mode.

If the TV is stuck on the Mi logo or does not respond to the remote:

Turn off the power outlet for 1 minute.
Press and hold the power button on the case for 10 seconds.
Connect the power back - the TV should start in normal mode.

💡

If the remote doesn’t work, check the batteries or try resetting it by holding the Menu + OK buttons for 5 seconds.

4.Switch off Xiaomi routers (Mi Router, Redmi Router)

Xiaomi routers (Mi Router 4A, Redmi Router AX6, Mi Router AX3000) do not have a physical shutdown button.

Method	Instructions	Notes
Through the web interface	1. Connect to the router network. 2. Enter in the browser 192.168.31.1. 3. Go to Settings → System → Reboot / Shut down. 4. Select "Switch off".	Not all firmware supports this option; some models only allow reboot.
Physical shutdown	Remove the power cable from the socket or press the Reset button (if it acts as a switch).	Abrupt shutdown can cause a failure of settings. It is recommended to use only in emergency cases.
Through the Mi Home app	1. Open the Mi Home app. 2. Select your router. 3. Go to Settings → Additional → Turn off.	The option is only available for routers connected to a Xiaomi account.

If the router is used as the main gateway for Xiaomi smart home, turning it off will cause all dependent devices (lamps, sensors, cameras) to be turned off. Before turning off, check if there are any active tasks (for example, recordings from the Mi Home Security Camera).

5. Turn off Xiaomi smart devices (lamps, speakers, cameras)

Xiaomi smart gadgets usually don’t have physical shutdown buttons, and their turn off depends on the type of device:

💡 Smart lamps (Yeelight, Mi) LED Smart Bulb: Through the Mi Home app: select a lamp → "Turn it off. Voice: Say "Alice, turn off the lights in the living room" (if connected to Yandex.Station or Google Assistant). Physically: turn off the switch on the wall (but this will reset the brightness and color settings).
🔊 Columns (Mi Smart Speaker, Redmi Sonos): Power button on the case (hold 3 seconds). via the Mi Home app in the device section.
📹 Home Security Camera: Turn off the power (take out the cable) USB). In the Mi Home app, switch to "Do Not Disturb" mode".

For battery-powered devices (such as Mi Portable Bluetooth Speaker), prolonged inactivity leads to automatic shutdown after 10-15 minutes. To fully discharge the battery, use the device before turning off or store it with a charge of 40-60%.

6.Switch off via ADB and Fastboot (for advanced users)

If standard methods don’t work (for example, the power button broke on the smartphone), you can turn off the device via ADB (Android Debug Bridge) or Fastboot.

Instructions for ADB:

adb shell reboot -p

This command gently turns off the smartphone as if you pressed the power button.

If your device is in Fastboot mode (for example, after a failed update), use:

fastboot oem off-mode-charge 0


fastboot reboot

Attention! Fastboot commands can cause settings to reset or lock the bootloader if used incorrectly.Do not apply them on devices with the bootloader locked (Xiaomi blocks it by default on new models).

💡

Use ADB/Fastboot only if you are confident in your actions. Standard methods are sufficient for a normal shutdown.

7. Frequent mistakes and how to avoid them

Many users make mistakes when turning off Xiaomi devices, which leads to breakdowns.

⚡ Pulling the power cord during an upgrade: this can kill the firmware. Always wait for the process to be completed (update completed will appear on the screen").
🔄 Frequent forced reboots: This is a temporary solution. If your smartphone freezes regularly, check it for viruses or reset your settings.
🔋 Turn off the smartphone with a discharged battery: if the charge is below 5%, wait for the connection to charge, otherwise the device may not turn on.
📱 Use of unoriginal charging: cheap cables can cause voltage surges, which will lead to automatic shutdown.

If the device is not switched off after switching off:

Try charging it for 30 to 60 minutes.
Press the power button for 20-30 seconds (sometimes helps with a deep discharge).
Connect to your PC and check if the device is detected (e.g., via Windows Device Manager).

Frequently asked questions

Can I turn off Xiaomi with a power button every day?

Yes, but it is not necessary. Modern Xiaomi smartphones are optimized for round-the-clock operation. Regular shutdown can even harm: for example, when you turn on, background processes that consume charge are triggered. It is enough to restart the device 1 time a week to clean the cache.

Why does Xiaomi’s smartphone turn on itself after switching off?

This can happen for several reasons: Auto Start is activated in settings (check Settings → Advanced Settings → Auto Start); Power button is faulty (often found on Redmi Note 8/9 after a year of use); Auto Update software is installed that starts the device (for example, Mi Fit for fitness bracelets).

How to turn off Xiaomi if the screen is not working?

If the screen is not responding, but the smartphone is on (vibrates, lights are on), try: Connect charging - sometimes it will wake up the display. Use Hard Reset (power button). + Turn down the volume. Connect the mouse through OTG-Adapter and try to control the cursor. If nothing helps, contact the service - the screen plume may have failed.

Should I turn off the Xiaomi router overnight?

No, it's not necessary. Modern Xiaomi routers are designed for round-the-clock operation. Moreover, frequent shutdowns can lead to: Failure of settings (especially if you use the Mesh network); wear of capacitors (due to voltage surges when you turn on); It is enough to reboot the router 1 time per month to clean the cache.

Can I turn off Xiaomi smart lamp with a switch on the wall?

You can, but it will reset all settings (brightness, color temperature, scripts), the lamp will turn on with the default settings. If you need to save the settings, use: the Mi Home app. Voice assistant (Alice, Google Assistant). Physical button on the lamp (if any).