Recovery Mode on Xiaomi smartphones (including Redmi, POCO and Mi models) is a service environment for system recovery, firmware installation or setting reset. However, many users face a situation where the device “hangs” in this mode after a failed update, reset or experiments with custom firmware. Unlike conventional inclusion, exiting Recovery requires specific actions – otherwise the smartphone may remain in the reboot cycle.
In this article, we will analyze all the current ways to exit the recovery mode on Xiaomi in 2026 – from basic (reboot through the menu) to advanced (use). ADB We will pay special attention to the risks of data loss when resetting via Wipe Data and the nuances of working with a blocked bootloader. POCO X5 Refusing to come out of a black screen with the words “No command” – you will find a solution here.
1. Basic method: reboot via Recovery menu
The easiest method is to use the built-in Recovery Mode menu options, which is suitable if the smartphone responds to touches or volume buttons and the system is not damaged.
Instructions:
- 🔄 Use the Volume buttons +/- navigation on the menu (some models have a sensor on them).
- 📱 Select Reboot or Reboot system now (in Chinese firmware may be called Reboot system now ).
- ✅ Confirm the choice of the power button.
- ⏳ Wait for the reboot (can take up to 5 minutes).
If the smartphone returns to Recovery after the reboot, it indicates damage to system files or a firmware conflict, in which case more radical measures will be required (see the following sections).
⚠️ Note: Some Xiaomi models (e.g. Mi 11 Ultra or Redmi) K50) Recovery menus can be in Chinese. To make no mistake, focus on icons: the reboot point is usually marked with a circle arrow.
2. Forced reset (Hard Reset)
If your smartphone doesn’t respond to commands in the Recovery menu, try hardware reset, which works even when the system freezes, but doesn’t guarantee data safety.
How to do this:
- Press the Power button for 10-15 seconds until the screen goes out.
- If the device does not restart, press the Power + Volume combination up for 20 seconds.
- After vibration, release the buttons – the smartphone should start in normal mode.
On non-removable battery models (such as the Xiaomi 13 or POCO F5), a forced reboot may require several attempts. If the screen remains black, plug the device into charging for 10 minutes, then try again.
💡
On some Xiaomi smartphones (like the Redmi Note 10 Pro), the button combination for forced reboot is different: try Power + Volume down for 10 seconds.
3. Resetting settings (Wipe Data) via Recovery
If a smartphone returns to Recovery Mode in a cycle, the cause is often a damaged user environment (for example, after a failed update or installation of Magisk), in which case a reset via Wipe Data will help, but note: all data on the device will be deleted, including photos, messages and applications.
Step-by-step:
- 🔧 In the Recovery menu, select Wipe Data (or Chinese firmware).
- 🔄 Confirm reset (a password may be required if Mi Account was installed).
- ⏳ Wait for the process to be completed (it will take 2-10 minutes).
- 📱 Select Reboot system now.
Once reset, the smartphone will start as new, and if that doesn't work, the problem is deeper (the boot partition or firmware is damaged), which will require flashing through Fastboot or MiFlash (see section 5).
⚠️ Note: On devices with a blocked bootloader, a Wipe Data reset may result in a Mi Account authorization request. If you don't remember your account details, your smartphone will become a brick»!
Save important data on the PC (if the smartphone is still turned on)|Make sure the battery is over 50 times charged%|Know the username / password from Mi Account (if the bootloader is blocked)|Have the original at hand USB-cable-->
4.Exit through ADB (for advanced users)
If standard methods fail and the smartphone is determined by the computer in Recovery mode, you can try rebooting it via Android Debug Bridge (ADB), which requires installed drivers and minimal command line knowledge.
What you need:
- 🖥️ Computer with Windows/Linux/macOS and established ADB.
- 🔌 Original. USB-cable (better from the set).
- 🔧 Included debugging by USB (If previously activated in the developer settings).
Instructions:
- Connect your smartphone to your PC in Recovery mode.
- Open the command line (or Terminal) and type: adb devices If the device is identified (the serial number will appear), execute: adb reboot
- If the command didn't work, try: adb shell reboot -p
On some firmware (e.g. MIUI 14), ADB in Recovery mode can be disabled by default, in which case only flashing through Fastboot will help.
What if the ADB can’t see the device?
5. Flashing through MiFlash or Fastboot
The last but most reliable way is to completely flash your smartphone through Fastboot, and it's relevant if:
- 🔄 The device is cyclically loaded into Recovery.
- 🚫 Reset via Wipe Data did not help.
- 🔧 Restore the stock firmware after unsuccessful experiments.
What will be required:
| Component | Description | Reference |
|---|---|---|
| MiFlash Tool | The official utility for Xiaomi firmware. | Download |
| Fastboot firmware | File with the.tgz extension for your model. | Firmware archive |
| Qualcomm/Mediatek Drivers | Depends on the smartphone processor. | Qualcomm / Mediatek |
| USB Type-C cable | Original, no damage. | — |
Step-by-step:
- Download and install the MiFlash Tool.
- Unpack Fastboot firmware into a folder without Cyrillic characters.
- Turn off your smartphone and press Power + Volume down to enter the Fastboot (a hare in a hat-eared hat will appear).
- Connect the device to your PC, launch MiFlash, and select the firmware folder.
- Press Refresh – the device should appear in the list.
- Select Clean All mode and press Flash.
- Wait until it's finished (10-20 minutes). The smartphone will reboot automatically.
⚠️ Note: Fastboot will reset all data, including IMEI and network settings on some models (e.g. Redmi) 9A). After the procedure, you may need to re-activate your Mi Account.
💡
Fastboot flashing is the only way to bring back a smartphone with a damaged boot partition or incompatible firmware, but on devices with a locked bootloader, it will need to be unlocked first through the official Xiaomi tool (it can take up to 720 hours to wait).
6. Features for different Xiaomi models
Some Xiaomi smartphones have unique nuances of working with Recovery Mode. Below are the key differences for the popular series.
| Model | Features of Recovery | Recommendations |
|---|---|---|
| Redmi Note 10/11/12 | The menu is in Chinese by default, the sensor is working. | Use a translator or focus on icons. |
| POCO F3/F4/F5 | Often requires unlocking the bootloader to reset. | Before reset, check the bootloader status through fastboot oem device-info. |
| Xiaomi 12/13 Series | ADB support in Recovery is disabled. | Use Fastboot or physical buttons. |
| Redmi K50/K60 | There may be problems with the definition in MiFlash. | Install the Qualcomm 9008 drivers manually. |
| Mi Mix 4 | Sensitive to firmware versions. | Download firmware strictly for your region (EEA, Global, China). |
Devices running a Mediatek processor (e.g. Redmi 10A or POCO C50) may require the SP Flash Tool instead of MiFlash. The algorithm is similar, but the firmware must be in scatter format.
Frequent mistakes and their solutions
When you try to exit Recovery Mode, users often face typical problems, and let's look at the most common ones and how to fix them.
Error 1: “No command” after selecting a menu item
Reason: Damaged Recovery menu or incompatible firmware.
Decision:
- 🔄 Forced reboot your smartphone (clip the power for 15 seconds).
- 🔧 If it doesn't work, run stock Recovery through Fastboot: Fastboot Flash Recovery. recovery.img fastboot reboot recovery
Mistake 2: Hanging on the MI logo after resetting
Reason: The boot partition or incompatible version of MIUI is damaged.
Solution: Fix the full firmware through MiFlash in Clean All mode.
Error 3: Mi Account authorization required after reset
Reason: Blocked bootloader and link to the account.
Decision:
- 🔑 Enter the Mi Account that was linked to the device.
- 📧 If you forget your password, restore it through the official website.
- 🚫 If your account is not yours, contact the previous owner or Xiaomi support team.
💡
On some models (e.g. Redmi Note 8 Pro) IMEI may disappear after reset via Wipe Data. To restore it, use the engineering menu: dial ##4636## and select Information → Restore IMEI (root rights required).