How to exit Fastboot mode on Xiaomi Redmi Note 7: a step-by-step guide

Xiaomi Redmi Note 7 is one of the most popular smartphones of the brand, but even it is not immune to failures, especially when it comes to the mode of Fastboot. This engineering mode, designed for firmware and restore the device, sometimes becomes a trap: the phone is loaded only to the logo with a rabbit in a hat-eared and labeled FASTBOOT, and then — no. The reasons can be different: interrupted update, unsuccessful unlocking the bootloader, experiments with custom firmware or even a banal failure of software.

In this article, we’ll look at 5 proven ways to exit Fastboot mode on Redmi Note 7 (codename lavender), including methods without a computer and using a PC. Importantly, not all solutions are universal — the effectiveness depends on whether the bootloader is unlocked on your device and which version of MIUI is installed. If the phone does not respond to buttons or connect to a PC, you will most likely need deep recovery through MiFlash or a service center.

What is Fastboot Mode and Why is the Phone Stuck in It?

Fastboot Mode (not to be confused with Recovery!) is a low-level Android device boot mode that allows you to interact with hardware via ADB or MiFlash Tool commands. On the Redmi Note 7, it activates:

• 🔄 Forced - holding the power buttons + Reduce the volume during switching on.
• ⚡ Automatically – after a firmware failure, unsuccessful update or unlock the bootloader.
• 🖥️ Software – through adb reboot bootloader commands (if debugging is done by the USB included).

The main reasons why Redmi Note 7 is “hanging” in Fastboot:

If your Redmi Note 7 got into Fastboot after trying to get root rights or install TWRP, the chances of an easy solution are minimal - most likely, you will need a complete flashing through MiFlash with authorization in your Mi Account.

Method 1: Exit from Fastboot with buttons (without PC)

The simplest method, which works 30-40% of the time, is forced reboot through hardware buttons, which is suitable if the failure was temporary (for example, after a failed “over the air” update).

Instructions:

1. Hold the Power button for 15-20 seconds until the screen goes out.
2. Release the button and wait 5 seconds.
3. Press and hold Power + Volume Up until the Mi logo appears (it will take ~10 seconds).
4. If the Recovery menu appears, select Reboot → System (use volume buttons for navigation and Power for confirmation).

If the phone loads again in Fastboot, repeat the steps 2-3 times. If after 3-4 attempts the result has not changed, move to the next method.

⚠️ Warning: On some versions of the Redmi Note 7 with a locked bootloader, prolonged button retention can lead to a hard reset that erases user data. If a reset warning appears on the screen, release the buttons and select another method.

Method 2: Use the ADB command (if debugging is enabled)

If your Redmi Note 7 has previously been activated by USB debugging (Settings → About Phone → MIUI → 7 times tap → For developers → USB debugging), you can try to exit Fastboot via the ADB command.

Procedure:

1. Download and install Android SDK Platform-Tools (or Minimal ADB and Fastboot for the simplified version).
2. Connect your phone to your PC through the original USB-cable USB 2.0 is preferable!).
3. Open the command prompt (Win + R → enter cmd) and go to the folder with ADB:

cd C:\platform-tools

1. Check if the device is determined:

fastboot devices

If the response appears serial number (e.g. 1234567890abcdef fastboot) — go ahead. If not, try another cable/port or install Mi USB Driver drivers.

1. Run the reboot command:

fastboot reboot

If the phone is successfully rebooted, the problem is solved. If not, try an alternative command:

fastboot continue

💡

If the fastboot reboot command doesn’t work, try first unlocking the bootloader (if it’s locked) with the fastboot oem unlock-go command. This will only work on devices with the officially unlocked bootloader!

Method 3: Recovery through MiFlash (complete flashing)

If previous methods didn't work, it's likely that the firmware is damaged, and you'll need to flash it through the official MiFlash utility, which erases all the data on the phone but returns it to a working state.

What you need:

• 🖥️ Windows computer 7/10/11 (64-bit).
• 🔌 Original. USB-cable (better from the set).
• 📁 Fastboot firmware ROM For Redmi Note 7 (lavender) download from Xiaomi’s official website (select the Stable version for your region).
• 🛠️ MiFlash utility - the latest version can be found on the forum MIUI.

Step-by-step:

1. Unpack the downloaded firmware (.tgz) →.tar) in a folder without Cyrillic characters (e.g, C:\lavender_fastboot).
2. Install MiFlash and run on behalf of the administrator.
3. Connect the phone off to the PC, holding Power + Volume Down to log into the Fastboot.
4. In MiFlash, click Select and specify the path to the firmware folder.
5. At the bottom, select Clean All (Full Clean) or Clean All and Lock (if you want to lock the bootloader).
6. Press Refresh – your Redmi Note 7 should appear in the list of devices.
7. Click Flash and wait for the process to end (5-10 minutes).

Once the firmware is successful, the phone will automatically restart. The first run can take up to 15 minutes - don't interrupt the process!

⚠️ Note: If MiFlash gives an error critical partition flashing is not allowed, then the bootloader is blocked and it must be officially unlocked through the Xiaomi website!

Method 4: Resetting to factory settings via Recovery

If the phone ever loads into the Recovery menu (even if it crashes back into Fastboot), you can try a factory reset, which will delete all the data, but save the possibility of recovery without a PC.

How to Sign In to Recovery on Redmi Note 7:

1. Turn off the phone (hold power for 20 seconds).
2. Press Power + Volume Up and hold until the Mi logo appears.
3. Release the buttons and the menu in Chinese/English should open.

If the menu is in Chinese, focus on the icons:

• 🔄 Reboot - reboot.
• 🗑️ Wipe Data - data reset (we need a point).
• 📱 Connect with MIAssistant – PC connection (no need).

Select Wipe Data → Wipe All Data and confirm the action. After reset, select Reboot → Reboot to System.

💡

Recovery only helps if the user part of the system is damaged, but it doesn't affect the bootloader or the kernel. If after reset, the phone goes back to Fastboot again, the problem is deeper, and you need MiFlash.

Method 5: Alternative methods (if nothing helps)

If all of the above methods do not work, radical measures remain:

1. Firmware through EDL-regimen (9008)

EDL (Emergency Download Mode) allows you to flash your phone even with a completely "killed" bootloader.

• 🔧 You need to close the test points on the board (requires disassembly of the phone).
• 🖥️ Use MiFlash or QFil with firmware for EDL.
• ⚠️ Risk of damage to hardware – recommended only to experienced users.

2. Contact the service center

If the phone is warranty or you are not confident in their abilities, it is better to take it to the official service Xiaomi.The cost of recovery after a failed firmware - from 1,500 to 3,000 rubles (depending on the region).

3.Buying a new phone

In rare cases (for example, if flash memory is damaged), recovery is impossible or economically impractical. Redmi Note 7 on the secondary market costs ~ 5000-7 000 rubles (2026), so sometimes it is easier to buy a new device.

Frequent Mistakes and How to Avoid Them

When trying to log out of Fastboot, users often make critical mistakes that exacerbate the problem.

Another common problem is that the phone is not defined in MiFlash.

• 🔌 Try another one. USB-port (better on the back of the PC).
• 🔄 Reinstall drivers manually through Device Manager.
• 🛡️ Disable antivirus and firewall.
• 🖥️ Run MiFlash in Windows 7 Compatibility Mode.

FAQ: Answers to Frequent Questions