How to Get Out of Xiaomi’s Quick Boot Mode: The Complete Guide

Owners of Xiaomi, Redmi and Poco smartphones periodically face a situation where the device, instead of the usual lock screen, meets them with an image of a rabbit repairing an android and the inscription FASTBOOT. This is a standard debugging mode designed to flash the device from the computer, but its accidental activation often puts users in a stupor. This usually occurs due to the accidental clamping of a combination of buttons in your pocket or when you put on a case.

You don't have to panic, because fast boot is not a sign of a breakdown, it's a low-level interface that lets you interact with your phone's memory directly, but you can't be there all the time, because it won't be performing its basic functions, calling or running apps, and you'll need to do a few simple things to get back to normal.

There are several proven ways to force a reboot and get out of this state, depending on how much the device has got stuck and whether it responds to physical keystrokes. Most of the time, the standard Hard Reset button procedure helps, but sometimes you need to intervene via a PC.

Reasons to Get into Fastboot Mode on Xiaomi

Before you fix the problem, it's helpful to understand what caused the crash. Most often, the activation of the mode is due to mechanical impact. The on and off buttons, which need to be pressed simultaneously to enter the Fastboot, are often located on one side of the case. Accidental pressing in the bag or when you pull out the phone is the most common reason.

But there are software factors, too: If you tried to update your firmware but the process stopped, or if you installed custom recavators, your phone could automatically go into debugging mode, and if you crashed your system files or damaged your memory partitions, you sometimes get a never-ending load cycle in the Fastboot.

• 🐰 Accidental clamping of volume and power buttons in a pocket or case.
• 💾 Attempt to fail system update or interrupted firmware.
• 🔋 Dramatic discharge of the battery during operation of the system.
• 🔧 Interference with the system partition or installation of modified software.

⚠️ Warning: If the phone enters Fastboot mode on its own immediately after turning on without pressing the buttons, this may indicate a physical failure of the volume keys or a sticking of the plume.

Sometimes, the reason is the use of poor-quality accessories, cheap cases can push buttons, and damaged USB cables can create short circuits in the power control circuit, which is perceived by the system as a signal to go into debugging mode.

The method of forced reboot with buttons

The easiest and safest way to exit Xiaomi’s fast boot mode is to use a physical power button, which doesn’t require a computer connection and works even when the phone’s screen doesn’t respond to touch, and you’ll need to hold the power button tight for a long time.

The retention time can vary from 10 to 20 seconds depending on the device model and the version of MIUI or HyperOS. At this point, the power controller is reset hardware, and the phone is forced to turn off. Once the screen goes out, release the button and press it again with a short press for normal turn on.

If standard retention doesn't work, try the combination method. Press both the power button and the volume button. This combination works more effectively on some Redmi Note and Poco models to get out of cyclical loading processes.

It's important to keep the button on immediately after the first vibration. Wait until the screen is completely turned off and the manufacturer's logo appears, make sure the phone starts loading. If it goes back to the Fastboot, the procedure should be repeated, perhaps holding the button a little longer.

Exit through the computer and the ADB utility

If the physical buttons don't respond or the power plume is damaged, you can try the software method. To do this, you'll need a computer with Xiaomi drivers installed and a minimum set of ADB (Android Debug Bridge) tools. Although Fastboot mode restricts access, the reset command often works.

Connect your phone to your PC through the original USB-In the Windows Device Manager section "Controllers" USB" It should be a device called Android Bootloader Interface or something like that. If the driver doesn't stand up, download Xiaomi. USB Drivers from the official website.

Open the command line in the ADB tool folder and type the following command to reboot:

fastboot reboot

Once you have entered the command, press Enter. If the connection is correct, the phone will immediately restart as normal. If you see a waiting for device error, check the cable or try another one. USB-port, preferably USB 2.0.

Use of the official Mi Flash Tool utility

For more complicated cases, when a simple reboot doesn't work, you can use the official Mi Flash Tool, which is a device firmware, but it also manages the status of the bootloader. You don't have to refashion the phone, you just need to make a connection.

Run the program on your computer and connect the phone in Fastboot mode. If the utility sees the device (the path to it will appear in the top row), then there is a connection. In this case, you can try pressing the Flash button, previously selecting the Clean All option, but this will delete all data.

A more gentle option is to simply use the check function or the stock firmware without installing it, but more often than not, it's enough that the program knocks on the phone to reset the hanging process. If the Mi Flash Tool sees the phone, then the hardware is intact and the problem is software.

Using specialized software is justified if you plan to continue to engage in modification of the device. For a one-time exit from Fastboot, this may be unnecessary, but as a backup option, keeping the program on a PC is useful.

💡

Use only the original cable from the kit. Cheap charging cables often don't have data lines, making it impossible for a computer to send a reset command.

Diagnostics of hardware problems and plumes

If the phone is constantly returning to fast boot mode after rebooting, the most likely problem is the hardware. The most likely culprit is the Volume Down button, which may be physically clamped, contaminated, or its plume has failed.

Check if the button is stuck. Try pressing it a few times quickly to stir up the mechanism. If you've recently changed the screen or body, you may have pressed the button plume or you may not have fully inserted the connector.

In some cases, gently tapping the body around the volume buttons helps, which can temporarily open the contact, allowing the phone to boot, but this is only a temporary solution, requiring a visit to the service center to replace the plume.

⚠️ Warning: Do not attempt to disassemble the phone yourself if it is warranty.Opening the case will result in loss of warranty service.

It's also worth checking the battery. With heavy wear, the battery voltage may not be enough to start the system properly, and the phone goes into safe boot mode. Try putting the device on charge for 30-40 minutes before trying to turn it on.

What to do in a cyclical reboot

When a phone reboots endlessly, flashing a logo or re-entering a Fastboot, it's called a boot loop. It can be a result of a software conflict. If simple methods don't work, try re-covery mode.

To do this, press the power button and the volume button. In the Recovery menu (which usually has a black background and a few lines of text), select Reboot, then Reboot to System. This often helps to avoid a mistaken start of the Fastboot.

If that doesn't work, it might be a damaged partition of the bootloader, which would require a complete flashing of the device through the Mi Flash Tool to clean up the data. SIM-card and memory card, as a faulty microSD card can also block system boot.

💡

Cyclic login to Fastboot most often indicates a failure of the volume button or damage to the bootloader's system files.

Frequently Asked Questions (FAQ)