How to safely exit Recovery Mode on Xiaomi Redmi 9: 5 proven ways

Recovery Mode on Xiaomi Redmi 9 is a service tool for system recovery, but sometimes users get into it accidentally or after unsuccessful firmware manipulations. If your smartphone is getting stuck on the screen with Mi Recovery and does not respond to standard commands, do not panic: in 90% of cases, the problem can be solved without contacting the service center.

In this article, we’ll look at all possible exit scenarios from Recovery, from a basic reboot to a Fastboot flash, and learn which actions are safe for data and which will result in a complete reset, and how to avoid re-entry into this mode. We will pay special attention to the nuances for Redmi. 9 (model M2003J15SC/M2004J19G), The algorithms may be different from other Xiaomi devices.

If you're here after trying to get root rights, TWRP updates, or a failed firmware, you can jump right to the Fastboot recovery section, and for the rest of us, we'll start with simple solutions.

1. Simple reboot: when the power button helps

In 30 percent of cases, leaving Recovery Mode on Redmi 9 is a banal reboot.

• 🔄 You got into mode by accident (for example, pinched the button combination when you turned on)
• 📱 The screen responds to touches but does not enter the system.
• 🔋 The battery is charged more than 15 times%

To restart the device:

1. On the Mi Recovery screen, select Reboot (or Reboot in Russian).
2. Confirm the action by clicking Reboot to System.
3. If the sensor is not working, press the power button for 10-15 seconds before vibration.

If Recovery appears again after the reboot, it means that the boot.img file is damaged or missing. In this case, move to the next partition.

💡

On Redmi 9, Power + Volume up always leads to Recovery when turned on. If you happen to get here often by accident, try turning on your phone with only the power button (no touching volume).

2.Cache cleanup: When the system "forgets" errors

If Redmi 9 loads cyclically in Recovery, but the Wipe Cache option is displayed in the menu, try clearing the partition cache.This procedure does not delete user data, but resets temporary system files that can block the download.

Step-by-step:

1. From the Mi Recovery menu, select Wipe & Reset (or Data Cleanup).
2. Then go on the Wipe Cache.
3. Confirm the action by swipe or press Yes.
4. After cleaning, go back to the main menu and select Reboot to System.

If the phone still doesn't boot after cleaning the cache, it could be a damaged firmware or a conflict of Magisk/Xposed modules, in which case only a complete reset or firmware reflash will help.

Hard Reset: When Data Is Not Important

Attention! This method will delete all data on your device, including photos, contacts and apps. Use it only if:

• 📲 The phone does not boot into the system even after cleaning the cache.
• 🔧 You are willing to lose personal data (or have made a backup copy).
• 📦 There are no important files in the internal memory.

How to make Hard Reset on Redmi 9:

1. From the Mi Recovery menu, select Wipe & Reset.
2. Then tap on Wipe All Data (or Reset All Data).
3. Enter a confirmation code (if required) – usually 123456 or yes.
4. Wait 5-10 minutes while the cleaning process is underway.
5. After you complete the process, select Reboot to System.

If the phone is still loaded into Recovery after reset, it means that the firmware itself is damaged (for example, there is no system.img file), in which case you will need to flash it through Fastboot or Mi Flash Tool.

4.Fastboot Recovery: When Recovery Doesn't Help

If the previous methods didn't work, you'd have to go through Fastboot mode, and that requires a computer, USB-The cable and the official firmware for Redmi 9 will be erased, but the device will return to working condition.

What you need:

• 💻 Windows computer (or Mac/Linux driverless ADB).
• 🔌 Original. USB-cable (preferably from the set).
• 📁 Official firmware for Redmi 9 (you can download on the official website of Xiaomi).
• 🛠 Mi Flash Tool (or fastboot manually).

Step-by-step:

1. Download the firmware for your model (M2003J15SC or M2004J19G) and unpack it into a folder.
2. Turn off Redmi 9 and press Power + Volume down to enter the Fastboot (a screen with a rabbit and the inscription Fastboot).
3. Connect your phone to your computer and start the Mi Flash Tool.
4. In the program, select a folder with firmware and press Refresh - the device must be determined.
5. Press Flash and wait for the process to end (5-10 minutes).
6. After successful firmware, the phone will automatically restart.

If the Mi Flash Tool gives an error critical partition flashing is not allowed, then the bootloader is blocked on the device, in which case you will need to unlock through the Mi Unlock Tool (you need a Mi Account associated with the phone at least 7 days ago).

5. Recovery via TWRP (for advanced users)

If your Redmi 9 has custom TWRP recovery installed, you can try to restore the system through it.

• 🔧 You have a nandroid backup in the device memory.
• 📦 You have installed Magisk or other modifications.
• 🔄 The phone is loaded into TWRP, but not.

Instructions for remediation:

1. Boot to TWRP (clip Power + Volume up when turned on).
2. Select Wipe → Advanced Wipe and mark Dalvik / ART Cache and Cache.
3. Return to the main menu and select Restore, then specify the folder with the backup.
4. After recovery, reboot to the system (Reboot → System).

If you don't have a backup, you can try to browse through TWRP by downloading the official firmware in.zip format and selecting Install. However, this method is less reliable than Fastboot and can lead to a brick (completely inoperable) device.

💡

Use TWRP only if you know exactly what you're doing. Wrong actions can turn Redmi 9 into a "brick" that won't turn on even through Fastboot.

6.How to avoid re-entry into Recovery

To avoid the problem again, follow these guidelines:

• 🔄 Do not interrupt the firmware update process (even if it lasts more than 30 minutes).
• 🔋 Do not allow battery discharge below 15% during critical operations.
• 📱 Do not install unofficial firmware without a backup.
• 🔧 Before manipulating root or Magisk, check for compatibility with your model.

If you experiment with firmware a lot, install TWRP and backup regularly through Backup, which will allow you to restore the system in 5 minutes if something goes wrong.

It is also useful to disable automatic firmware updates in settings (Settings). → The phone. → Updating the system → ⚙️ → Auto-update if you use custom modifications.

FAQ: Frequent questions about Recovery on Xiaomi Redmi 9