Owners of Xiaomi, Redmi and Poco smartphones sometimes face an unpleasant situation when the device instead of the usual desktop MIUI displays a screen from the Reboot menu. This is the system restore menu or bootloader, which appears when operating system errors, unsuccessful updates or accidental button pressing during turn-on. Panic in this situation is not worth it, since in most cases the problem is solved by software methods without contacting the service center.
The main task of the user at this point is to correctly restart the device to get out of this state. However, sometimes the standard Reboot to System button does not respond, or the phone returns to the same menu after selecting this item. In this article, we will discuss in detail all possible causes of such a loop and provide proven algorithms for returning the gadget to life.
Why Xiaomi Phone Is Included In Reboot Menu
Before you start taking action, you need to understand the nature of this situation. Most often, the cause is damage to Android system files, which may have occurred during an interrupted firmware update or due to a failure in the drive, the system can not find the boot sector and automatically goes into recovery mode.
Another common cause is software component conflict, where if you recently installed applications from unknown sources or modified system files through root rights, it could have compromised the integrity of the operating system, in which case the phone protects itself by blocking normal boot.
The impact of custom firmware on stability
Mechanical factors can also be excluded: Sticking a volume or power button can simulate entering recovery mode each time you turn on, and check the buttons' progress: they must have a clear tactile response and not fall into the case.
Standard method of exiting via the Reboot menu
The easiest and safest way to get back to normal is to use the built-in tools of the menu itself. The screen usually displays a list of options in English or Chinese. You need to select the item responsible for restarting to normal mode.
Use volume buttons (up and down) to navigate, and power buttons to confirm your choice. In some models, navigation can be done by touching the screen if the touchscreen is operating correctly in this mode. Select Reboot to System or Reboot.
☑️ Standard output algorithm
If you select this item, the phone shows the Reboot menu again, then the problem is deeper than a simple software failure, in which case you will need a deeper intervention, described in the following sections.
💡
If the buttons on the case do not respond, try connecting the phone to the computer through USB-cable – sometimes it helps to activate control through ADB-team.
Using Recovery Mode for Resetting
When a standard reboot doesn't help, Recovery mode comes to the rescue. It's a deeper system recovery layer that allows you to clean the cache or completely reset. To enter this mode, you usually need to turn off the phone (if possible) and pinch the Volume Up + Power button combination.
In the Recovery menu, you also have volume buttons and power buttons, and you can find Wipe Data or Clear Data, and you have to be very careful, because there's Wipe All Data, which will delete all your files completely, and Wipe Cache, which will only affect temporary files.
⚠️ WARNING: Wipe All Data will permanently delete all photos, contacts and applications, only use this method if other methods have failed and you have a backup or willingness to lose data.
After cleaning, select Reboot -> Reboot to System. The first boot process after reset may take up to 5-10 minutes longer than usual.
💡
Cache Clearance (Wipe Cache) is a secure procedure that does not delete personal data, but can eliminate errors causing you to log in to the Reboot menu.
Exit via Fastboot and computer
If the Recovery menu is not available or working, you can try Fastboot mode. This is a low-level mode designed to firmware the device from your computer. To enter it, press Volume Down + Power on the device off. The image of a hare repairing an android will appear on the screen, or the inscription FASTBOOT.
When in Fastboot mode, connect your phone to a computer with the ADB/Fastboot driver installed. Open the command line and type a command to force a reboot. This often helps push the phone out of the cyclic state.
fastboot rebootThis command sends a signal to the bootloader to start the operating system immediately. If the phone goes into reboot and falls back into the Fastboot, the bootloader or system partition may have been damaged.
| Regime. | Button combination | Appointment | Risk of data loss |
|---|---|---|---|
| Recovery | Volume Up + Nutrition | Resetting and remediation | High (when choosing Wipe) |
| Fastboot | Volume Down + Nutrition | Firmware and debugging | Low (no firmware) |
| Safe Mode | Download from the light. | Diagnostics of applications | No. |
Forced reset and discharge
There's a method that's often ignored, but it's effective when the power controller freezes. It's a long forced reset. Hold the power button and hold it for a while. 15-20 Some Xiaomi models require holding both buttons (power and volume) at the same time.
If the phone reacts with a vibration or logo but goes back to the Reboot menu, try the "discharge" method. Leave the device on in this menu until the battery runs out completely and the phone shuts down itself. Then put it on charge (you can do it for 10-15 minutes) and try to turn it on the usual way.
Battery memory effect
This is a way to release static electricity and force all the processes that could have blocked normal loading, but if the problem is physical damage to the button plume, this method will only have a temporary effect.
What to do if nothing helps
In situations where neither resetting nor flashing through Fastboot helps, it can be a serious hardware malfunction. Often, Reboot menus get phones with a departed loop of the on button or button module, the system reads the constant press and goes into recovery mode.
It can also degrade the internal memory of eMMC or UFS. When the memory cells stop reading, the bootloader can't find the system files and reboots cyclically, in which case the software methods are powerless.
⚠️ Warning: If the phone heats up in the CPU area even when it's off or when it's connected to a charger, disconnect it immediately from the network.
The only correct solution for hardware problems is a visit to the authorized service center Xiaomi. Specialists will diagnose the motherboard and, if necessary, replace the button or restore memory.
💡
Constant heating and cyclic reboot are sure signs of hardware breakdown, requiring the intervention of a soldering iron, not a programmer.
Preventing the appearance of the Reboot menu
To minimize the risk of a future collision with this problem, follow simple operating rules: First, never interrupt the system upgrade process. If the battery is drained, first charge the device to a level of at least 50% before starting installing MIUI updates.
Second, avoid installing apps from unverified sources. Malware can modify system files, which will lead to instability. Use only the official Google Play store or GetApps.
- 🛡️ Regularly back up important data to the Mi Cloud or your computer.
- 🔋 Monitor the condition of the battery and replace it with heavy wear.
- 🧹 Periodically clean the system cache through standard optimization tools.
- 📱 Keep your phone away from impacts and moisture to prevent plumes from drifting away.
Adherence to these guidelines will significantly extend the life of your smartphone and reduce the likelihood of software failures, and remember that preventing a problem is always cheaper and faster than solving it in an emergency.