How to Get Out of Fastboot Mode on Xiaomi Redmi Note 8 Pro: Full Guide 2026

Fastboot mode on Xiaomi Redmi Note 8 Pro is a special state of the device designed to firmware, unlock the bootloader or restore the system. However, sometimes the smartphone can “hang” in this mode after a failed update, reset or experiment with custom firmware. If your Redmi Note 8 Pro shows a black screen with the inscription FASTBOOT and a picture of a rabbit in a hat-eared, do not panic: in 90% of cases, the problem can be solved without contacting the service center.

In this article, we will discuss all the current ways to exit the fastboot – from the simplest (button reboot) to advanced (ADB and MiFlash), and pay special attention to the nuances for the Redmi Note 8 Pro model, since its hardware platform (Mediatek Helio G90T) has specific features compared to devices on the Qualcomm Snapdragon.

Before proceeding with the instructions, make sure that:

• 🔋 Battery level above 30% (in the fastboot smartphone continues to discharge!).
• 🔌 There's an original one at hand. USB-cable (poor cables may interrupt the connection).
• 💻 Access to a Windows computer (complex methods require a MiFlash Tool or a Windows computer). ADB).

1. Simple reboot: button combinations

To start with, the obvious is trying to get out of a fastboot without a PC connection. There are two hardware combinations on the Redmi Note 8 Pro that can work:

Method 1: Forced resetting

• 🔄 Press the power button for 15-20 seconds.
• 📱 If the screen goes out and there is a vibration, release the button. The smartphone should boot in normal mode.
• ⚠️ If after the reboot the fastboot appears again, the problem is deeper, and other methods are needed.

Method 2: Combination for resetting cache

This combination sometimes helps if the fastboot is caused by damage to the system cache:

1. Turn off your smartphone (squeeze the power for 20 seconds).
2. Press Power + Volume up and hold for 10-15 seconds.
3. If the Mi logo appears, release the buttons – the device will try to boot into recovery.

⚠️ Note: Redmi Note 8 Pro Power Combination + The volume down doesn't work to exit the fastboot (unlike the devices on Snapdragon.

2.Exit via Mi Assistant (official Xiaomi tool)

If the hardware buttons didn’t help, try Xiaomi’s official software, the Mi Assistant, which is designed to restore devices in fastboot mode and works even with a locked bootloader.

Step-by-step:

1. Download Mi Assistant from the official website (Windows version).
2. Connect the Redmi Note 8 Pro to the PC USB-cable (preferably original).
3. Run MiAssistant.exe and wait until the program determines the device in Fastboot mode.
4. Press Unlock (unlock) or Flash (firmware) if you need to restore the software.

Mi Assistant will automatically download the latest stable firmware for your model and prompt you to install it. The advantage of the method is that it does not require unlocking the bootloader and saves user data (if you choose the Save user data option).

3.Using ADB and Fastboot (for power users)

If Mi Assistant failed or you prefer manual control, you can log out of the fastboot via the Windows command line using ADB and Fastboot utilities.This method requires an unlocked bootloader or root rights (but not always).

Step 1: Installation of drivers and tools

• 🖥️ Download Google’s Platform Tools (includes fastboot.exe).
• 🔧 Install drivers for Mediatek (can be used through MTK Driver Auto Installer).
• 📂 Unpack the platform-tools in the root of the disk C:\ (for example, C:\platform-tools\).

Step 2: Teams to exit the fastboot

Open the command line (Win + R → enter cmd) and do:

cd C:\platform-tools\


fastboot devices

If the device is determined (the serial number will appear), enter:

fastboot continue

This command tells the smartphone to continue loading in normal mode. If it doesn't work, try:

fastboot reboot

⚠️ Note: On the Redmi Note 8 Pro, the fastboot oem unlock command will not unlock the bootloader - this requires the official Mi Unlock Tool tool and the tied Mi Account.

4. Firmware through MiFlash (last resort)

If the previous methods didn't work, you just have to reflash the device through the MiFlash Tool, which erases all the data on the phone, but brings it back to life. The Redmi Note 8 Pro has Anti-Rollback protection, so it's important to choose the right firmware version.

Step 1: Downloading the firmware

• 🌐 Go to the official website of Xiaomi firmware.
• 🔍 Enter the Redmi Note 8 Pro (codename: begonia).
• 📥 Download the latest stable version of Fastboot ROM (file with extension.tgz).

Step 2: Firmware through MiFlash

1. Unpack the downloaded archive in a folder (for example, C:\ROM\).
2. Start MiFlash.exe (you can download it here).
3. Click Select and point the way to the firmware folder.
4. Connect your phone in Fastboot mode (should be determined as to how to use it) COM-port).
5. Select the Clean All option in MiFlash and click Flash.

⚠️ Note: Firmware through MiFlash will reset all settings and delete data from internal memory.If the phone had important files, try other methods first or retrieve data through the internal memory. TWRP (if established).

5. Recovery through TWRP (for users with custom recavery)

If your Redmi Note 8 Pro has a custom TWRP recavator installed, you can exit the fastboot without losing data.

Step 1: Download to TWRP

Turn off the phone, then press Power + Volume up for 10 seconds. If the TWRP logo comes up, you're in the recavator.

Step 2: Restore the system

• 🔧 Choose Advanced → File Manager and check the integrity of the files in /system.
• 🔄 If the system is damaged, select Wipe. → Advanced Wipe and tag Dalvik, Cache, System.
• 📥 Install a clean firmware through Install (if downloaded in advance) ZIP-memory-card).

Step 3: Reboot

Once you restore, select Reboot → System. If TWRP offers root or modifications, opt out (this may lead to a fast boot again).

💡

If you don’t have a backup in TWRP, but the phone is detected in a fastboot, you can try copying important files via the fastboot pull /data/media/0/C:\Backup\ command.

6. Hardware problems: when nothing helps

If none of the software methods worked, the reason could be a hardware malfunction.

• 🔌 Damaged. USB-port (phone not defined by PC, but charged).
• 🔋 Faulty battery (the device turns off when connected to the PC).
• 🧠 Damaged memory chip (eMMC) (often manifested after failed firmware).
• 📡 Problems with the antenna module (affects the work of the Fastboot through the USB).

How to diagnose:

1. Try connecting your phone to another PC with drivers installed.
2. Check if the device in Device Manager is defined as MediaTek Preloader.
3. If the phone heats up when connected to a PC, it is a sign of a short circuit on the board.

In such cases, it is recommended to contact the service center.The cost of repair for the Redmi Note 8 Pro (2026):

• Replacement USB-port: ~1 500–2 500 ₽.
• EMMC chip soldering: ~3 000–5 000 ₽.
• Diagnostics + box-stitch: ~1 000–2 000 ₽.

💡

If the phone is not detected in fastboot or charging mode, the problem is almost certainly hardware. Don't try to stitch it forcibly - this can aggravate the breakdown.

7.How to avoid fastboot in the future

To avoid running into Fastboot mode again, follow these rules:

When updating the firmware:

• 📱 Use only official firmware from the Xiaomi site (avoid castoms from unknown developers).
• 🔋 Charge your phone at least 60% before upgrading.
• 🌐 Update via Wi-Fi, not mobile internet (download interruption is a common reason for fastboots).

When working with the loader:

• 🔓 Unlock the bootloader only through the official Mi Unlock Tool.

In everyday use:

• 🛡️ Do not use programs to overclock or modify the kernel (for example, Kernel Adiutor).
• 🔄 Regularly do backups through Settings → System system → Backup.
• 🚫 Avoid apps that ask for root access without needing to.

FAQ: Frequent questions about fastboot on Redmi Note 8 Pro