When the screen of the Xiaomi Redmi 10 smartphone lights up with a picture of a rabbit fixing a robot or the words FASTBOOT, it can take anyone by surprise. This low-level interface state is designed for engineers and advanced enthusiasts, allowing you to refashion the device or debug it through the computer. However, for the average owner, the appearance of this screen often means that the phone has stopped responding to standard actions, and attempts to turn it on in the usual way do not work.
Don't panic, because in the vast majority of cases, the device is not physically broken. Fastboot mode could be activated accidentally due to sticking buttons, a failure in the Android operating system or after a failed update. Understanding the nature of this mode will help you quickly bring the gadget back to life without going to the service center.
In this guide, we will look at all the known ways to get out of this state, from simple mechanical actions to the use of specialized software. It is important to act consistently so as not to aggravate the situation and save all user data on the device.
Why Redmi 10 is in Fastboot mode
Before you start taking action, you need to understand the cause of the problem. Most often, the Fastboot mode on Xiaomi smartphones is turned on while pressing the power button and the volume button while booting the system. This can happen if the phone was in a tight case that squeezed the buttons, or if you carried it in your pocket without locking the screen.
Another common cause is a software failure: a firmware update that went wrong due to battery drain or unstable internet can leave the system in limbo, in which case the MIUI operating system cannot boot and automatically goes into diagnostic mode.
💡
If your Redmi 10 has recently fallen or been exposed to moisture, the appearance of a Fastboot may indicate a closure of the button plume.
Also worth mentioning is the so-called bootloops, where the phone tries to boot up, encounters an error and reboots again, eventually getting stuck in the bootloader menu, which often happens when you try to install unofficial firmware or get root rights.
- 🐰 Accidental pressing of a key combination in a pocket or bag.
- 📉 Failure when updating system software or interrupted firmware.
- 💧 Moisture falling under volume buttons, causing short circuit.
- 🔧 Damage to system files of the bootloader after experiments with software.
The easiest way: forced reset
In 90% of cases, the Fastboot mode on Redmi 10 is left by a simple mechanical action: you need to press the on button and hold it long enough, the system ignores short presses in this mode, so the standard 3-5 seconds will not work.
Press the power button and hold it without letting go, approximately 10-15 The screen can go out, then the Mi or Redmi logo will come back up again. Once you see the manufacturer's logo, you can let go of the button.
☑️ Reboot algorithm
If nothing happens the first time, try a combined press. Press both the power button and the Volume Up button. Hold this combination for about 15-20 seconds. This method often helps when a standard power button reset is blocked by system processes.
⚠️ Warning: If after 20 seconds of button retention, the screen continues to burn with the inscription FASTBOOT, Do not push the buttons harder. Prolonged mechanical action can damage the buttons or the train.
Sometimes it takes a few tries. You pause for a couple of minutes between reboot attempts so that the power controller can reset the remaining charge. If the phone still returns to the same menu, move on to more sophisticated methods.
Exit through the computer and ADB-team
If the mechanical buttons don’t respond or the phone cycles back into bootloader mode, you can try the software output using a computer, which requires a USB cable and installed ADB drivers, which is effective when the system is partially functional but cannot complete the boot.
First, you need to connect the smartphone to the PC via the original cable. The Fastboot screen usually displays the connection status, but for ADB to work, in some cases, it requires that USB debugging be enabled in advance. However, there is a team that works at the bootloader level.
Where to download ADB tools?
Open the Windows Command Prompt (cmd) on behalf of the administrator. Go to the folder with the installed tools. Enter the communication verification command:
fastboot devicesIf you see your device's serial number, you've got a connection.
fastboot rebootThis command compels you to send a signal to restart the device in normal mode. If the command is successful, the phone should restart. If the error is "waiting for device", check the drivers or try another one. USB-port.
- 💻 Connect Redmi 10 to your computer through a high-quality USB-cable.
- ⌨️ Open the command line and enter fastboot devices to check.
- 🔄 Use the fastboot reboot command to force a restart.
- 🔌 If your computer can’t see your phone, install Xiaomi drivers. USB Driver.
Using Recovery Mode to Reset
When standard methods don't work, you can use the Recovery Mode, which is a deeper level of system interaction than the Fastboot, but less dangerous than full flashing, and you can get into it on Xiaomi with a keyboard combination.
Turn off the phone (if it's stuck in the Fastboot, hold the power button until the screen is completely turned off). Once the screen goes out, quickly press the power button and the Volume Up button. Hold them until the Mi logo appears, then release the power button, continuing to keep the volume.
In the Recovery menu, you can navigate with volume buttons (up and down), and you can choose with a power button. You need to find Wipe Data or Factory Reset. Note: using Wipe Data will completely remove all photos, contacts and applications from the phone's internal memory.
| Action in Recovery | Data retention | Risk to the system | Implementation time |
|---|---|---|---|
| Reboot | Yes. | Minimum | 1 minute |
| Wipe Cache | Yes. | Low. | 2-3 minutes |
| Factory Reset | No (all removed) | Medium. | 5-10 minutes |
| Connect with MIAssistant | Depends on the action. | High-pitched | Depends on the PC. |
If you have selected Wipe Data, confirm the action. Once the process is complete, select Reboot. The phone will launch as new, without your personal data, but with a clean system, which often solves the problem of cycling boot.
💡
Recovery (Wipe Data) is a last resort before flashing, and only use it if the phone data isn't important or you have a fresh backup.
Firmware of the device through the Mi Flash Tool
If the software failure is critical and the bootloader files are affected, the only solution is to completely reflash the software, using the official Mi Flash Tool and the firmware image for Redmi 10, which requires accuracy and a stable Internet connection.
Download the latest firmware from the official MIUI bootloader website. It is important to choose the version for your model (codename selene for the global version of Redmi 10), and you will need the Mi Flash Tool program, which you should install on your computer.
Put your phone in Fastboot mode (if it's already there, just plug in the cable). Launch the Mi Flash Tool, press the Refresh button, the program must identify the device. Choose the path to the folder with the unpacked firmware and press Flash.
⚠️ Warning: The firmware process cannot be interrupted; turning off the cable or turning off the computer while recording data can turn the smartphone into a “brick”, which can only be restored in the service center.
At the bottom of the Mi Flash Tool, there are three firmware options: clean all (complete cleaning), save user data (attempting to save data) and clean all and lock (cleaning and locking the bootloader).
- 📥 Download Fastboot (.tgz) firmware for Redmi 10 and unpack the archive.
- 🖥️ Start the Mi Flash Tool and connect your phone in Fastboot mode.
- 📂 Specify the path to the firmware folder in the program interface.
- ⚡ Press Flash and wait for the green "Success".
Once the firmware is successful, the phone will automatically restart, and it can take up to 10 minutes to boot up as the system optimizes applications.