How to get out of Safe Mode on Xiaomi Redmi Note 7: a step-by-step guide

Safe Mode on the Xiaomi Redmi Note 7 is a diagnostic mode that blocks third-party applications. It automatically activates when system crashes, incorrect updates or software conflicts. If your smartphone boots with the words "Safe Mode" in the bottom left corner of the screen, do not panic: it is not a breakdown, but a MIUI security mechanism.

In most cases, it takes less than a minute to exit Safe Mode, but sometimes additional steps are required, from a simple reboot to reset settings. In this article, we will discuss all working methods, including those that help even when the system freezes. We will pay special attention to the nuances of the Redmi Note 7 (lavender model), since this device has specific bugs with a safe mode after updates to the new model. MIUI 12+.

If you're here after a failed app or tweak system installation, try method 1 first (fastest). If your smartphone has been stuck in Safe Mode after a drop or upgrade, go to method 3 or 4. For power users, at the end of the article, there's a section with ADB-team.

1. Standard reboot (works 80% of the time)

The easiest method is to simply reboot the device. On the Redmi Note 7, safe mode is often turned on randomly (for example, when you press volume buttons long while booting) and just as easily shut down.

How to do this:

1. Press the power button for 3-5 seconds.
2. In the menu that appears, select "Reboot" (or "Restart").
3. Wait 30 to 60 seconds for the smartphone to turn off completely and re-energize.

If after the reboot, the "Safe Mode" label disappears, the problem is solved. If not, move on to the next method.

⚠️ Attention: On some firmware MIUI The reset button may not be available, in which case hold the power button for 10-15 seconds until the screen goes out (forced shutdown).

2. exit through the notification panel (method for MIUI 10–14)

MIUI firmware since version 10 has a hidden function to turn off Safe Mode through the notification curtain, which works even if the smartphone does not respond to the press of the power button.

Instructions:

• 📱 Swipe down from the top edge of the screen to open the notification bar.
• 🔍 Find a notification with the text "Safe Mode is enabled" (usually at the top of the list).
• 🚫 Slip on it - the button "Switch off" or "Stop Safe Mode" will appear".
• 🔄 Confirm the action and wait for the automatic reboot.

If there's no notification, your version of MIUI doesn't support this method. Try alternatives.

💡

On the Redmi Note 7 with custom firmware (e.g. Pixel Experience), the Safe Mode notification may be called “Safe mode active.”

3. Forced shutdown via buttons (for hung devices)

If your smartphone doesn't respond to touch or freezes in safe mode, use hardware reboot, which will work even if you have a serious system failure.

Step-by-step:

1. Turn off the device with a long press of the power button (10+ seconds).
2. After completely switching off, press the power button + volume button at the same time.
3. Hold them for 15-20 seconds until the Redmi logo appears.
4. Release the buttons – the smartphone should boot in normal mode.

⚠️ Warning: Don't confuse this with Fastboot login! If a fastboot-mode appears on the screen, you've been holding the buttons for too long.

4.Reset via Recovery Mode (if nothing helps)

If the previous methods didn't work, you'll have to use Recovery, which doesn't delete user data, but resets the system settings to factory settings.

How to log in to Recovery:

• 🔌 Turn off your smartphone (hold the power button for 10 seconds).
• 🔄 Press the power button. + volume-button.
• 📱 Release the buttons when the Mi logo and menu appear in English.

Further action:

1. Use volume buttons for navigation and power button for selection.
2. Select the option "Wipe & Reset" → "Reset Settings (not to be confused with Wipe Data!).
3. Confirm the action and wait for the process to be completed.
4. Reboot the device with Reboot → Reboot to System.

Fully charge the battery (minimum 50%)

Backup of important data

Make sure that SIM-The card and memory card are removed (if any)

Remember your Mi Account (if tied)-->

⚠️ Note: If you select "Wipe Data", all data on the device will be deleted.

5. Clean volume buttons (if Safe Mode turns on itself)

On the Redmi Note 7, a common cause of spontaneously entering safe mode is sticking the volume button, which is due to dust, moisture or mechanical wear.

How to clean the buttons:

• 🧹 Use a toothpick or soft brush to gently remove dirt around the buttons.
• 💨 Blow the holes with compressed air (for example, a canister for cleaning equipment).
• 🔧 If the button is physically damaged, a replacement will be required (refer to the service center).

After cleaning, check the buttons: press them alternately 10-15 times. If Safe Mode no longer appears, the problem is solved.

6. Advanced method: Disconnection via ADB (for experienced)

If you're familiar with ADB (Android Debug Bridge), you can disable Safe Mode via the command line, which is suitable if the smartphone is booting, but standard methods don't work.

What you need:

• 🖥️ A computer with installed Xiaomi drivers and ADB.
• 🔌 USB-cable (preferably original).
• 📱 Included debugging by USB on a smartphone (Settings) → The phone. → Version. MIUI → 7 times to tap → Additional settings → For developers → Debugging by USB).

Commands to execute:

adb shell


su




setenforce 0




setprop persist.sys.safemode 0




reboot

If you have Safe Mode left after the reboot, try the alternative command:

adb shell am broadcast -a android.intent.action.BOOT_COMPLETED

💡

The ADB method only works if the bootloader is unlocked on the smartphone and there are root rights. On the MIUI stock firmware, this method will not work without unlocking.

Frequent questions about safe mode on Redmi Note 7