How to get out of Safe Mode on Xiaomi Redmi 9: All the working methods

Safe Mode on Xiaomi Redmi 9 is a diagnostic mode that is triggered automatically when a system crashes or is forced by the user to troubleshoot, and it turns off all third-party applications, leaving only basic MIUI functions. However, sometimes the smartphone gets stuck in this mode, preventing you from returning normal work, why it happens and how to properly exit safe mode — let’s go into detail.

The main problem is that many users confuse Free Mode with hardware failures or viruses. In fact, 90% of cases are due to application conflict, improper MIUI updates or mechanical button damage. This article will help not only to return the smartphone to normal operation, but also to prevent it from re-entering safe mode.

Why does Redmi 9 only boot in Safe Mode?

Before you try to exit Safe Mode, it’s important to understand what triggered it, and here are the most common reasons for Xiaomi Redmi 9 (including the Redmi 9A/9C/9T modifications):

• 🔄 Application Conflict: Installation or update of a program that is incompatible with a version MIUI (particularly relevant to firmware MIUI 12.5–14).
• 🔧 System Update Failure: Interrupted firmware or "curve» OTA-Update through Settings → Update of the PO.
• 🎯 Hardware problems: Sticking the Loudness button down (on Redmi 9, it is responsible for logging into Safe Mode when booting).
• 🦠 Viruses or Root Access: Malware or incorrect root rights can force a system to enter diagnostic mode.
• 🔋 Battery discharge: If charge falls below 5% during reboot, smartphone could get stuck in Safe Mode.

Redmi 9 with MIUI 13/14 also has a bug where the secure mode is activated after connecting to Mi Account with unstable Internet, which is associated with checking the licenses of system applications.

Method 1: Standard Reboot (works 70% of the time)

The easiest method is forced reboot, which helps if the smartphone is in Safe Mode due to a temporary failure, not a hardware malfunction.

1. Hold the Power button for 10-15 seconds until the screen goes out.
2. Wait 30 seconds – it is important that the capacitors are discharged.
3. Turn on the smartphone again, holding the Power until the Redmi logo appears.

If the screen still displays the Safe Mode label after the reboot, proceed to the next method.

⚠️ Note: If after restarting the smartphone again falls into Safe Mode, do not try to repeat the procedure more 3 This could indicate damage to the partition. /system or conflict with MIUI-service.

Method 2: Exit through the notification menu (for MIUI 12-14)

On MIUI 12 firmware and later in Safe Mode, there is a hidden menu to disable mode, which works even if the standard reboot didn’t help.

1. Swipe your finger down from the top of the screen to open the notification bar.
2. Find a notification with the text Safe Mode is enabled (or Safe Mode is on in English firmware).
3. Slip on the notification – a window will open with the button “Turn off”.
4. Confirm the action and wait for the automatic reboot.

If there is no notification, try to force it:

Settings → Applications → Application Management → Three points (menu) → Show system → Find “Safe Mode” → Click “Stop”

Method 3: The button combination when booting

On Redmi 9 (as on most Xiaomi smartphones), Safe Mode is enabled by holding the Volume button down when booting.

Follow the following steps:

1. Turn off your smartphone (hold Power + Volume up for forced shutdown).
2. Press the Volume button up and, without letting it go, press Power.
3. Hold both buttons for 10-15 seconds until the Mi logo appears.
4. Release the buttons – the smartphone should boot in normal mode.

⚠️ Note: Some custom firmware (such as LineageOS or Pixel Experience) combine Volume up + Power can start Recovery, not exit Safe Mode. ADB (Method 5).

Method 4: Reset your settings via Recovery (if nothing helps)

If previous methods didn't work, you'll have to use Recovery Mode, which resets the settings to factory settings, but saves the data in memory (photos, videos, documents), except that if you choose Clear All Data, the information will be erased forever.

Instructions for Redmi 9:

1. Turn off your smartphone.
2. Press Volume Up + Power and hold until the Mi logo and Recovery menu appear.
3. Use volume buttons for navigation and power to select the item.
4. Select Wipe Data → Wipe All Data (if you want to save files) or Wipe All Data (Erase All) for a complete reset.
5. Confirm the action and wait for the process to be completed.
6. Choose Reboot. → Reboot to System.

After resetting, the smartphone will boot in normal mode, but you will need to reconfigure MIUI (login to your Mi Account, restore a backup, etc.).

💡

Before reset, remove the microSD card if installed. In some cases, Safe Mode is activated due to reading errors of the external drive.

Method 5: Exiting through ADB (for advanced users)

If you have access to a computer, you can exit Safe Mode using Android Debug Bridge (ADB), a method that is suitable for firmware where standard methods don’t work (for example, after a failed rooting).

What you need:

• 🖥️ A computer with installed Xiaomi drivers and ADB (You can download from the official Android website).
• 🔌 USB-cable (preferably original).
• ⚙️ Included debugging by USB in the developer settings (Settings) → The phone. → Version. MIUI — Tap 7 times, then return to the additional → For developers).

Step-by-step:

1. Connect Redmi 9 to your PC via USB.
2. Open the command line (Win + R → cmd) and type:

adb devices

(The device must be displayed with the serial number.)

1. Execute the command to exit Safe Mode:

adb shell settings put global safe_mode 0

1. Reboot your smartphone:

adb reboot

If the team fails, try an alternative method:

adb shell am broadcast -a android.intent.action.BOOT_COMPLETED

💡

ADB-Teams only work if Safe Mode includes debugging USB. If it is not in the settings, use Recovery (Method 4).

Preventing: How to Avoid Re-entry into Safe Mode

To prevent Redmi 9 from downloading in Safe Mode, follow these guidelines:

• 📱 Update. MIUI Only through official channels (Settings) → Software updates: Avoid custom firmware from unknown sources.
• 🔍 Check the apps before installing. Use Google Play Protect or Mi Security to scan for viruses.
• 🔋 Keep your battery power on track. Keep it under 10%, which can cause reboot failures.
• 🛠️ Clean the cache regularly. Go to Settings. → Warehouse → Clean the cache or use Wipe Cache in Recovery.
• 🔑 Restrict root. If you use root access, disable it for system applications via Magisk or SuperSU.

If Redmi 9 periodically spontaneously switches to Safe Mode, check the Loudness button down for sticking.

1. Remove the cover and inspect the button for contamination.
2. Press it carefully several times – it should return to its original position without delay.
3. If the button “fails”, contact the service center to replace the plume.

FAQ: Frequent questions about Safe Mode on Xiaomi Redmi 9