In the process of operating a Xiaomi Redmi 7 smartphone, there inevitably comes a point when the device starts to work unstable, slow down or issue system errors. Often the only effective solution is a complete data reset that returns the gadget to the “out of the box” state. This procedure removes all user files, accounts and installed applications, leaving only a clean MIUI operating system.
This step may be necessary not only because of software failures, but also before selling a device to protect personal information from prying eyes. It is important to understand that restoring factory settings is an irreversible process that requires prior preparation. Without creating a backup, you risk losing important contacts, photos and documents forever.
In this article, we will take a look at all the available ways to return Redmi 7 to the original state: through the settings menu, using the control buttons in Recovery mode and remotely through Google. You will learn how to properly prepare the device, what steps to follow consistently and how to avoid common errors that can turn a smartphone into a “brick”.
Preparing the smartphone for a complete data reset
Before you start cleaning, you need to do a number of critical things: Backup is the first and most important step, and make sure that all your photos, videos and documents are stored on external media or in cloud storage, such as Google Drive or Mi Cloud.
It's also worth checking the battery charge.The system partition formatting process can take 10 to 30 minutes, and if the phone turns off in the middle, it could damage the file system. Charge Redmi 7 to at least 60-70% before starting the procedure.
- 📸 Backup your contacts and messages through Google services.
- 🔋 Check the battery level and connect the charger.
- 🔐 Remember your Google account password and your Mi Account password.
- 📱 Extract. SIM-microSD card and memory card if installed.
⚠️ Note: If you forget your Google account password after resetting, security system FRP (Factory Reset Protection will lock your phone, and unlocking it without login data will be extremely difficult.
Pay special attention to tied accounts. Modern versions of Xiaomi's MIUI firmware have anti-theft protection. If you just reset without untidying your account, the next time you activate your phone, you'll need to enter the previous owner's password, which is a protection that can't be circumvented by simple formatting.
Method 1: Reset via the settings menu (standard method)
The safest and easiest way to bring the Xiaomi Redmi 7 back to factory status is to use the system’s built-in menu, which is suitable when the phone is turned on, the screen is responsive to touch, and you have access to the desktop or settings menu.
To start, open the Settings app and scroll down to About, which is where the basic software version information and the memory management button are located. Click on it to go to the detailed menu.
Next, you will need to find the Reset button (or Reset), which is usually located at the bottom of the screen, and the system will warn you that all data will be deleted. If you are ready, click Reset again for confirmation.
- 📲 Click "Reset" in the window that appears.
- 🔒 Enter the pattern lock or digital screen unlock password.
- 🔄 Click “OK” or “Reset” to start the process.
Once confirmed, the phone will restart and the cleaning process will begin, and the Android or Mi logo may be displayed on the screen, as well as the progress scale, and do not interrupt this process or try to turn off the device even if it seems to be hanging.
☑️ Checklist before resetting through the menu
Method 2: Hard Reset with Recovery Mode (if the phone is not turned on)
If the MIUI operating system is damaged, the phone goes into a cyclic bootloop or does not respond to the sensor, the Hard Reset method is used. It is executed through Recovery Recovery mode, which is booted separately from the main system.
To get into this mode on Redmi 7, you need to turn the device off completely. Then press the volume button and the power button at the same time. Hold them until the Mi logo appears, then release the power button, but keep the volume up until the Recovery menu appears.
Power button: Choice/Confirmation
Volume button Up: Moving up
Volume button Down: Moving downIn the Recovery menu, you can navigate with volume buttons and select with power buttons. You can find the "Wipe Data" option and select it. Then select "Wipe All Data" and confirm the action by selecting "Confirm".
⚠️ Warning: In Recovery mode, the touch screen is not working. All actions are performed exclusively with mechanical volume and power buttons.
Once the cleanup is complete, the message will appear "Data wiped successfully." Press "Back to Main Menu" and then select "Reboot" and "Reboot to System." The phone will start as new, the initial setup process will take a few minutes.
Remote reset via Find My Device
There is a situation where the phone is lost or stolen, but it is left on the Internet and geolocation, in which case you can restore the factory settings Xiaomi Redmi 7 remotely through the service Google, which will erase the data so that it does not fall into the wrong hands.
To do this, you need to go from any computer or other smartphone to the site android.com/find And you log in to the same Google account that you entered on the lost device, and you'll try to locate the device.
In the list of available actions, select the option "Erase Device" (Erase Device). Once confirmed, the command will be sent to the phone. Once Redmi 7 connects to the network, it will automatically perform a data reset and return to factory state.
| Parameter | Through Settings. | Through Recovery. | Remotely. |
|---|---|---|---|
| Access to the menu | Required. | Not required | Not required |
| Data retention | Possibly (optional) | No (complete removal) | No (complete removal) |
| Difficulty | Low. | Medium | Low. |
| Presence of PC | Don't. | Don't. | Needed (other device) |
What to do if the phone asks for a password after resetting?
Solution: Errors and locks after reset
Users often face difficulties after the Redmi 7 factory reset is complete, and the most common problem is asking for a password from a Mi Account or Google account when you first activate it, which is the standard security behavior.
If the phone says "Device locked" or requires you to enter a password that you don't remember, the only way out is to restore access to the account through the manufacturer's website or Google. IMEI.
Another possible problem is the "brick" when the phone does not turn on after reset, which can happen when the formatting process is interrupted, in which case it can help to enter Fastboot mode (pressing the power and volume button down) and try to flash through the computer using the Mi Flash Tool utility.
- 🔋 If the phone does not turn on, put it on charge on 1-2 hour.
- 🔄 Try a forced reboot by pressing the power button for 15 seconds.
- 💻 Use a PC to check the visibility of the device in the Device Manager.
⚠️ Warning: Do not try to disassemble the phone or close contacts on the board if you do not have experience.This will lead to a loss of warranty and may permanently put the Xiaomi Redmi 7 out of action.
Primary adjustment after recovery
After the successful reset and reboot, you will see a welcome screen with a choice of language. Choose Russian and click "Start." Then you will connect to the Wi-Fi network, which is necessary to activate the device and check for security updates.
The system will offer to restore data from the backup. If you have previously created a backup in Google or Mi Cloud, you can choose it now. Contacts, applications and some settings will be downloaded automatically. If there is no copy, select "Do not copy applications and data."
💡
When you first set up, immediately update system components through the Play Store and check the updates in the About Phone menu. This will close the security vulnerabilities that are current when your firmware version is released.
An important step is to set the date and time, as well as set up the methods of protection (pattern lock, fingerprint). Redmi 7 is equipped with a fingerprint scanner on the back, which works quickly and conveniently for unlocking.
In the final step, the system will prompt you to log in to your Google account and Mi Account. Enter your details. Once you have set up, you will be taken to a clean desktop. Now your Xiaomi is as fast as it was the day you bought it.
💡
Regular resetting of settings (once every 1-2 years) helps to extend the life of the smartphone, eliminating accumulated software debris and update conflicts.