How to Sign In to TWRP Recovery on Xiaomi Smartphones: All Ways 2026

Installing a custom TWRP recavator on Xiaomi devices is the first step to full control over firmware, backups and system modifications. But even after successful firmware TWRP many users face the problem: how exactly to get into it? Official documentation often does not talk about the nuances for specific models of Redmi, POCO or Mi, and the wrong actions can lead to locking the bootloader or “brick” of the device.

This article covers all the current ways to sign in to TWRP on Xiaomi smartphones (including devices from 2023-2026), taking into account the features of their hardware. We will analyze methods through fastboot, button combinations, as well as solutions for cases when the system does not see custom Recovery.

If you're here for the first time, don't be afraid of the terms. We'll explain each step so that even a beginner can understand it, but if you're an advanced user, go straight to the fastboot login section or the button combination table for your model.

Preparation: What to do before entering TWRP

Before you try to enter the custom Recovery, make sure that:

• 🔓 The bootloader is unlocked. TWRP On Xiaomi, unlocking is done through the official Mi Unlock Tool (requires Mi Account binding and 7-15 days waiting).
• 📱 TWRP If you are planning to install it, first study the firmware guide via fastboot or OrangeFox (for some models).
• 🔋 Battery charge > 50%. Interrupting the process due to discharge can result in data loss or partition damage /data.
• 🔌 All protections are disabled: fingerprint, pattern lock, PIN-Some versions TWRP They can’t get around them, and you risk being left without access to the device.

On the new Xiaomi 13/14, Redmi Note 12 and POCO F5 models, the company has tightened its policy: confirmation via SMS or even video identification is now required. If your device was purchased less than 7 days ago, unlocking may be temporarily unavailable.

⚠️ Note: On devices with Dynamic Partition (all flagships Xiaomi after the 2021 (b) standard versions of the year TWRP You can't work. Use special assemblies with support. dynamic_partitions (for example, from Skkk or Wzsx150).

Method 1: Sign in to TWRP via fastboot (most reliable)

This method works for 100% It's a device that has an unlocked bootloader, regardless of the model. ADB/Fastboot cable USB Type-C (preferably original).

1. Turn off your smartphone.
2. Press the Power Button + Volume Down for 10-15 seconds until the Fastboot logo appears.
3. Connect the device to the PC and open the command prompt (cmd) in the folder with fastboot.
4. Enter the command: fastboot boot twrp.img (where twrp.img is the image file of your recaveri downloaded for a particular model).

If you run the command, the device restarts to TWRP, congratulations! If you don't, check:

• 🔌 Correct cable connection (try another port) USB).
• 📂 The path to the file twrp.img (It should be in the same folder where the team is launched).
• 🔄 The fastboot version (update via the SDK Platform Tools by Google).

⚠️ Note: On some models (Redmi Note) 10 Pro, POCO X3 Pro: an error may occur after the fastboot boot command FAILED (remote: 'Not allowed in Lock State'. This means that the bootloader is locked despite unlocking. TWRP Fastboot Flash Recovery (Fastboot Flash Recovery) twrp.img), not temporarily load.

Method 2: Combinations of buttons for entering the Recovery

If fastboot is not available for some reason, you can try to log into TWRP using hardware buttons. However, here is a caveat: on Xiaomi, the standard combination (Power + Volume) often leads to Mi Recovery stock recovery, rather than TWRP. To get around this, use alternative methods:

If no combination works, most likely, TWRP is not stitched into the recovery section, but only temporarily downloaded through fastboot boot, in which case, after the reboot, it will disappear, and you will have to use the first method.

💡

On devices with AMOLED-With the buttons held, the screen may remain black, but the device vibrates. That's OK - keep holding the buttons until the buttons appear. TWRP.

Method 3: Login through ADB (if the system is booted)

If your smartphone is turned on but you want to upgrade to TWRP without turning off, use ADB. This method is useful when you need to back up before experimenting with firmware.

1. Enable USB debugging in the developer settings (Settings → About Phone → MIUI version – tap 7 times, then go back to Additional settings → For Developers).
2. Connect the device to the PC and confirm the debugging permission.
3. In the command line, do adb reboot recovery.

If you are in Mi Recovery instead of TWRP, you are:

• 🔄 Castomic Recovery is not stitched into the recovery section (only temporarily loaded).
• 🔧 The system has a protection that overwrites the Recovery when booting (the solution is to disable Anti-Rollback or flash it). disable_forceencrypt).

Typical problems and their solutions

Even after a successful firmware TWRP, users experience errors when trying to log in, and here are the most common cases and ways to fix them:

1. Upon logging in to TWRP asks for password

This happens if the device has been enabled with File-Based Encryption (FBE).

• 🔑 Enter your password from your Mi Account or PIN-lock-code.
• 📁 If the password doesn't fit, go ahead. disable_forceencrypt.zip through TWRP (You'll find it on the forum. XDA).
• ⚠️ In the extreme, make a full Wipe (lose all data!).

2. TWRP does not touch the fingers (sensor is not working)

The problem is typical for some TWRP builds on the POCO X3 NFC and Redmi Note 9 Pro.

• 🖱️ Connect. OTG-Mouse (works 90% of the time).
• 🔄 Re-flash another version TWRP (For example, OrangeFox instead of the standard).
• 📱 Try to control the volume buttons (some assemblies support navigation without a sensor).

3. Upon exiting TWRP, the device is loaded into Mi Recovery

So that means that the stock firmware is overwriting the custom recaveri.

• 🔧 Please. twrp-installer.zip straight TWRP (download ahead!).
• 🔄 Turn it off. OEM Unlock in the developer settings (paradox, but sometimes helps).
• 📦 Install firmware with Anti-Rollback disabled (e.g. Xiaomi.EU).

💡

If TWRP It doesn't hold up after the reboot, it's not a bug, it's a feature of Xiaomi's protection (A/B) script twrp_installer.

Advanced tips for experienced users

If you are not the first day working with custom firmware, these life hacks will save time:

• 🔄 Double firmware TWRP: On devices with A/B All the main components of Xiaomi after 2020 ● Switch the recaps to both slots: fastboot flash recovery_a twrp.img fastboot flash recovery_b twrp.img
• 📡 Wireless. ADB into TWRP: Turn on the recavery in the settings ADB over Network (port 5555) to control a device over Wi-Fi without cable.
• 🔧 Automatic loading in TWRP: Edit it. boot.img via Magisk, adding the recovery line=twrp in bootcmd.
• 🛠️ Backup Recovery: Save the image TWRP memory (/sdcard/twrps/) and sew twrp_backup.zip, Recovery of the Recovery after Resetting.

For Dynamic Partition devices (such as Xiaomi 12T or Redmi K60), standard TWRP firmware methods do not work.

1. Download the special assembly TWRP supportive dynamic_partitions (from the developer, for example. Wzsx150).
2. Fly it through fastboot with a flag. --disable-verity --disable-verification: fastboot flash recovery twrp-dynamic.img
3. Immediately after logging in to TWRP, swipe Multidisabler (disables encryption and MIUI protection).

Security: How not to "brick" the device

Working with custom recavéri always comes with risks, and here are some specific actions to avoid problems:

• 📋 Backup before each change: B TWRP Back up boot, system, data, and vendor partitions. Save it to your PC or flash drive.
• 🔍 Check the firmware versions: Don't stitch TWRP, designed MIUI 13, on the device with MIUI 14 - that'll lead to a bootloop.
• 🔌 Use quality cables: Cheap USB-cables may interrupt data transmission during firmware, which will damage the recovery partition.
• 📡 Turn off the internet when you are firmware: MIUI can automatically download and install the update, overwriting TWRP.

⚠️ Note: On devices with Qualcomm Snapdragon 8 Gen 2/3 (for example, Xiaomi 13 Ultra or Redmi K60 Pro) Incorrect recovery firmware can lead to hard-brick (irreparable damage). Before experimenting, check if your model has working solutions on the forum. XDA or 4PDA.

If after manipulation with TWRP the device stopped turning on:

1. Try to log in to fastboot (Food). + Reduce volume and flash stock recaveries: fastboot flash recovery stock_recovery.img
2. If it doesn’t work, use the Mi Flash Tool for full flashing (select the clean all option).
3. In extreme cases, contact the service center with a request to reflash through EDL (requires an authorized Xiaomi account).

Frequent Questions (FAQ)