Xiaomi is stuck and not included? 7 proven ways to restore

Xiaomi smartphone suddenly stopped responding to pressing, the screen froze on the logo or the device does not show signs of life at all? This situation is familiar to many owners of the brand’s gadgets – from budget Redmi to flagship Mi and POCO. The reasons for freezing can be different: from a software failure after updating to hardware problems with the battery or motherboard.

In 80% of cases, the device can be “resuscitated” without the help of specialists. In this article, we will discuss 7 working methods for turning on a suspended Xiaomi, from the simplest forced reboot to recovery via Fastboot and EDL Mode. We will focus on saving data and preventing repeated failures. If your smartphone does not respond to charging, does not vibrate when you press buttons or cyclically reboots, here you will find a solution.

1. Forced reboot: a universal way for all models

The fastest and safest method is the hard reset, which works even if the screen is completely black and the device is not responding to the connection to charge, and is suitable for all Xiaomi models, including the Redmi Note 10/11/12, POCO X3/X4/X5, Mi 11/12/13 and older devices.

How to do this:

• 🔋 Turn off charging (if connected).Sometimes the smartphone doesn't respond because of a faulty cable or power supply.
• 📱 Press the power button on 10–15 On some models, for example, POCO F3/F4) You may need to hold it until 20–30 seconds.
• 🔄 If the screen flashed or the Mi logo appeared, release the button - the device will start to restart.
• ⚡ Connect to charging after rebooting (if battery level is below 10%).

If, after a forced reboot, the smartphone is back on the logo or the screen flashes, the problem is deeper and other methods will be needed. On models with a fixed battery (all modern Xiaomi), holding the power button safely will not lead to data loss.

2. button combinations for login to Recovery Mode

If the hard reset doesn’t work, the next step is to launch Recovery Mode, which allows you to reset, clear the cache, or reflash the device without losing user data (with the right actions).

Instructions for different models:

After successfully logging into Recovery Mode, you will see menus in English or Chinese.

• 🔄 Reboot is a regular reboot (try it first).
• 🧹 Wipe Data – Complete reset (deletes all data except files on the dataset) SD-map).
• 🗑️ Wipe Cache – Cache cleanup (safe, data not affected).
• 📥 Apply update from ADB — computer update.

⚠️ Note: If you choose Wipe Data, all applications, settings and files in the internal memory will be deleted. SD-card (if any) to save the photos.

Make sure the battery is >20 percent |

Select Wipe Cache (not Wipe Data!)|

Reboot the device (Reboot) |

If it doesn’t work, try Apply Update from ADB|-->

3.Using Fastboot Mode for Advanced Users

If Recovery Mode is not available or does not solve the problem, the next level is Fastboot mode, which allows you to reflash the device, unlock the bootloader or restore the system through the computer. ADB/Fastboot Tools on PC and Basic Command Line Knowledge.

Step-by-step:

1. Install Google’s Platform Tools (includes fastboot and adb).
2. Turn off your smartphone (if it’s on, use Forced Reboot).
3. Press Power + Volume down for 5-10 seconds until the hare appears in the hat-eared (Fastboot logo).
4. Connect your phone to your PC through USB-cable (preferably original).
5. Open the command prompt (cmd) in the folder with the platform-tools and type:

fastboot devices

If the device is identified (its serial number will appear), you can start to restore.

• 🔄 Reboot: fastboot reboot
• 📱 Recovery: Fastboot Reboot Recovery
• 🗃️ Installation of firmware: fastboot flash system name file.img

⚠️ Attention: The wrong commands in Fastboot can turn a smartphone into a brick. If you are not sure about your actions, consult official Xiaomi documentation or forums like this. 4PDA.

4. Recovery through EDL Mode (for critical crashes)

EDL Mode (Emergency Download Mode) is an emergency mode that is activated when the smartphone is completely dead: it does not turn on, does not respond to buttons, is not detected in Fastboot. In this mode, you can reflash the device using special tools like the Mi Flash Tool or QFil.

How to log in to EDL Mode:

1. Turn off the smartphone (if it’s on, remove and insert the battery back if possible).
2. Hold the Loud up. + Loudness down and, holding them, connect USB-plug-in.
3. Nothing will appear on the screen, but the PC must identify the device as a Qualcomm HS-USB QDLoader 9008 (check in Device Manager).

You'll need firmware.

• 🖥️ Mi Flash Tool (download from official website).
• 📁.tgz or.zip firmware for your model (it is important to choose the right version!).
• 🔌 Cable USB Type-C with data support (not all cables are suitable!).

Firmware process:

1. Unpack the firmware in a folder without Cyrillic symbols.
2. Open the Mi Flash Tool, press Select and point the path to the firmware folder.
3. Connect the phone in EDL mode.
4. Press Refresh – the device must be determined.
5. Choose Clean All (complete cleanup) or Save User Data (data retention, but not always works).
6. Press Flash and wait until it is finished (5-10 minutes).

💡

Before you run your firmware through EDL Mode, check the smartphone model by labeling it under the lid or box. Installing firmware from another model will turn the device into a brick!

5. Checking the battery and hardware problems

If none of the software methods worked, the problem could be the hardware, and it's often the fault of:

• 🔋 Battery: bloating, deep discharge or collapse of contacts.
• 🔌 Charging port: oxidation, pollution or mechanical damage.
• 📱 Motherboard: Burnt out elements after falling or getting moisture.
• 🔊 Power button: sticking or breaking contacts.

How to diagnose:

• 🔍 Visual inspection: check if the battery will go up (if the lid is removable). If the case is deformed, do not turn on the device!
• 🔌 Charging test: connect another cable and power supply. If the charging indicator is not on, the problem is in the port or battery.
• 🔊 Check the power button: pressing should be a clear click. If the button "fails" or does not press, you need to replace.

⚠️ Warning: If the battery is blown up, you can't try to turn the smartphone on or charge it! This can cause a fire. Remove the battery immediately (if possible) or take the device to service.

To check hardware problems without disassembly:

1. Connect your smartphone to charge for 30 to 60 minutes. If the indicator doesn't light up, try to move the cable slightly in the connector.
2. Light the flashlight on the screen at an angle - sometimes the image is, but the backlight does not work.
3. Hold the phone to your ear and press the power button, and if you hear relay clicks or vibrations, the problem is in the display or the plume.

💡

If the smartphone does not respond to charging, does not warm up when connected to the PC and does not make sounds, there is a 90% probability of a problem in the hardware, in which case self-repair is not recommended (risk of aggravating the breakdown).

6. Data recovery after reset

If you had to make Wipe Data or reflash your device, you're at risk of losing photos, contacts and other data, but there are ways to recover them -- even if your smartphone didn't turn on.

Where to look for lost data:

• ☁️ Cloud services: check Mi Cloud, Google Photos, Google Drive. Automatic sync could save some files.
• 💾 SD-map: if external memory is used, the data must remain intact.
• 🖥️ Backups on PC: remember if the phone was connected to the computer to transfer files.
• 📱 Internal memory: if you make Wipe Cache instead of Wipe Data, you can keep the data. Use programs like DiskDigger or Recuva to scan.

Instructions for recovery through Mi Cloud:

1. Go to i.mi.com and log in with the same account you had on your smartphone.
2. In the Devices section, select your Xiaomi model.

For recovery from internal memory:

1. Connect your smartphone to your PC in Fastboot mode.
2. Use the adb pull /sdcard/ command to copy files from internal memory (if the partition is not encrypted).
3. For deep scanning, use 7-Data Recovery or EaseUS MobiSaver (root rights required).

7. Prevention of hangings: how to avoid repeated failures

To make sure that Xiaomi smartphone does not hang in the future, follow these recommendations:

Update the software through Settings → About the phone → System update |

Do not install applications from unknown sources|

Clean the cache regularly (Settings → Memory → Clear the cache)|

Avoid battery discharge (keep 20–80 charge%)|

Do not overheat the device (do not play heavy games when charging)|-->

Top.-5 Causes of Frosting and How to Avoid It:

If your Xiaomi is not new (over 3-4 years old), consider replacing the battery. Over time, the battery capacity drops, and the device can shut down or freeze even at 30-40% charge. The cost of replacing the battery in the service center is from 1,500 to 3,000 rubles (depending on the model).

FAQ: Frequent questions about Xiaomi's got stuck smartphones