How to turn on Xiaomi Redmi: 5 working ways to do anything

Xiaomi Redmi smartphones are known for their reliability, but even they sometimes refuse to turn on after a discharge, firmware failure or mechanical damage. If your Redmi does not respond to the power button, do not rush to carry it to the service center - in 80% of cases, the problem can be solved yourself. This article will help you understand how to properly turn on the device in various situations, from a base start to recovery from a critical failure.

We will look not only at standard methods (for example, charging and holding the power button), but also at little-known techniques such as forced reboot via Recovery or activation via Fastboot. Particular attention will be paid to the Redmi Note 12/13, Redmi A2/A3 and other current series, where the procedure may differ from the old versions. If after reading the questions, check the FAQ at the end of the article, where you can see typical user errors.

1. Standard on: what to do if Redmi does not respond to the power button

Start with the simplest: check if the battery is running out. Even if you're sure you've charged your smartphone, plug it into the original charger for 10 to 15 minutes. Many Redmi models (like the Redmi 10C or Redmi 9A) don't show a charging indication if the battery is completely discharged.

After connecting to the network:

• 🔋 Wait for the charging indicator (red or orange light bulb) to appear, if it doesn't light up within 5 minutes, try another charger or cable.
• 📱 Hold the power button for 10-15 seconds until the logo appears. MI. On some models (such as the Redmi Note 11 Pro) it can take up to 20 seconds to complete the test.
• 🔄 If the screen flashes but doesn't turn on, disconnect the charger and try again. Sometimes the smartphone "hangs" during the initialization stage.

If you don't have a logo on your screen after this, move on to the next section. On models with NFC (like the Redmi Note 12 Pro+), standard inclusion can be blocked due to a failure in the wireless payment module, in which case only a reset via Recovery will help.

2. Forced reboot: when the standard method does not work

If the smartphone is stuck on the MI logo or does not respond to the power button after charging, try a hard reset, which will work even if the device is completely dead in appearance. Important: forced reboot does not delete data, but can interrupt background processes (for example, system updates).

Instructions for most Redmi models:

1. Turn off the charger (if connected).
2. Press the power button + volume button for 15-20 seconds.
3. Release the buttons when the screen goes out (or the MI logo appears).
4. Wait for the system to load fully (it can take up to 5 minutes).

For Redmi Note 10/11/12 and Redmi K50, the combination may be different:

• 🔄 Redmi Note 10 Pro: Powering + Reduce volume (hold 10 seconds).
• 🔄 Redmi K50 Gaming: Nutrition + Volume up. + Home (if you have a physical button).

Disconnect the charger

Check that the buttons are not stuck

Hold the combination for at least 15 seconds

Do not release buttons until the MI logo appears

-->

⚠️ Attention: Redmi with AMOLED-screens (for example, Redmi Note 12 Pro)+) If you're in hard reset, you might see an artifact that's flashing, and that's normal, the screen will recover after you're fully loaded.

3. Enable via Recovery Mode: if the smartphone is stuck on the boot

If Redmi is turned on but hangs on the MI logo or reboots cyclically, you will need access to Recovery Mode. This mode allows you to reset settings, clear the cache or reflash the device. Important: some actions in Recovery lead to data loss (photos, contacts, messages).

How to log in to Recovery:

1. Turn off your smartphone (if it responds to buttons).
2. Press Power + Volume Up until the menu appears (usually 5-10 seconds).
3. Use volume buttons for navigation, power button for selection.

The Recovery menu has options:

If you have selected Wipe Data, the smartphone will turn on as new after the reset, and you will need a backup (for example, via Mi Cloud or Google Account) to recover the data.

4.Inclusion via Fastboot: for power users

Fastboot mode allows you to control your smartphone through your computer, even if it doesn't turn on in the standard way.

• 🔧 The smartphone does not respond to buttons, but is determined by the PC.
• 📥 You need to flash the device through the Mi Flash Tool.
• 🔄 You need to unlock the bootloader (bootloader).

How to log in to Fastboot:

1. Turn off your smartphone (forced if necessary).
2. Press Power + Volume down until a robot image with the label Fastboot appears.
3. Connect the device to the PC via USB.

To work with Fastboot will require:

• 🖥️ Installed Xiaomi drivers (download on the official website).
• 🛠️ Utility. ADB Fastboot (included in Android) SDK).
• 📄 Firmware for your model (e.g. Redmi Note 11 Global).

Example of a command to reboot from Fastboot:

fastboot reboot

⚠️ Warning: The wrong commands in Fastboot can turn your smartphone into a brick. If you're not sure what you're doing, contact the service center.

5.Battery problems: When Redmi doesn't turn on because of battery

If the smartphone doesn't show signs of life even after you're connected to a charger, the problem could be the battery or the power controller.

• 🔌 No charge (indicator not burning).
• 🔋 The battery is discharged in a few minutes.
• 🔥 Smartphone gets hot when connected to the network.

What you can do on your own:

1. Check the cable and the power supply. Use the original Xiaomi charger (like the 33W for the Redmi Note 12). Cheap counterparts may not provide the voltage you need.
2. Clean the USB-C connector. Dust or contact oxidation often blocks charging. Use a wooden toothpick (not metal!).
3. Try resuscitating the battery. Connect the smartphone to charge and leave it for 1-2 hours, even if the indicator is not on.

If these methods have not worked, it is likely that a battery replacement will be required.

💡

If the smartphone is turned on, but the battery goes down in 10-15 minutes, check the energy consumption in Settings → Battery. It may be the application or firmware failure.

6. Including after a firmware update or failure

If Redmi stopped turning on after the MIUI update, it is likely that there was a failure in the system files.

• 🔄 Reverse via Recovery. Select Wipe Cache then restart the device.
• 📥 Fastboot flashing. Download the official firmware for your model from the website MIUI Downloads and use the Mi Flash Tool.
• 🔧 Dumping through EDL Mode: This mode is used to restore bricks, but requires special equipment (usually only available at service centers).

For firmware via Fastboot:

1. Download the archive with firmware and unpack it in a folder.
2. Connect your smartphone in Fastboot mode to your PC.
3. Launch the Mi Flash Tool, select the firmware folder and press Flash.

⚠️ Note: Fastboot removes all data, including photos in internal memory. If your smartphone had important files, try extracting them first. TWRP Recovery (if installed).

💡

If the smartphone is stuck in the upgrade phase (the progress bar does not move for more than 30 minutes), in any case do not remove the battery.

7 Mechanical damage: what to do if Redmi fell or got wet

If your smartphone falls, gets wet or has been physically stressed, it may not be the software that's the problem, but the hardware.

• 💧 Corrosion traces on the charging connector or under the cover.
• 🔊 No vibration or sound when pressing the buttons.
• 📱 Screen cracks or battery bloating (seen from the raised back panel).

Actions depending on the situation:

What can't be done:

• ❌ Drying your smartphone with a hair dryer or on a battery will damage the battery.
• ❌ Disassemble the device without experience - you can damage the plumes.
• ❌ Connect to charging if you smell burns.

FAQ: Frequent questions about Xiaomi Redmi inclusion