Introduction: Why Xiaomi P1 43 may not be included?
Xiaomi TV TV P1 43 – a popular model with Google TV, But even it sometimes refuses to start, and the reasons range from the banal (the remote is dead) to the serious (the firmware failure after the update), and the statistics of service centers show that in 60% of cases the problem is solved without repair - it is enough to perform the switching on correctly.
This guide covers all possible scenarios, from standard power button start to emergency methods after reset or upgrade. We will discuss what to do if the TV turns on but immediately turns off, the indicator flashes or does not respond to the remote. P1 43 (e.g., the location of service buttons on the back panel).
Before you bring the equipment to the service, check all the options from this article — 8 from 10 The faults are eliminated by themselves for 5-10 minute.
Method 1: Standard button activation on the body
The most obvious method is to use a physical power button on your TV. P1 43 it is located on the right side panel (when you look at the screen) and looks like a small circular switch with an on/off icon.
Algorithm of action:
- 🔌 Make sure the power cable is tightly connected to the socket and connector DC IN Check that the socket is working (plug in another device).
- 🖱️ Press the power button once. On the front panel should light up a white indicator (if successfully turned on, it will go out through the window). 2-3 seconds).
- 🕒 Wait. 10-15 In that time, the Google system TV If the screen is still black, try holding the button. 5-7 force-start.
If the TV doesn't respond:
- ⚡ Check the power supply: on the back of Xiaomi P1 43 near the connector DC IN You have a small LED, and if it doesn't burn when you're connected to the grid, the problem is the power supply or the cable.
- 🔄 Turn off the TV for 1 minute, then try again. This will reset temporary errors in the power chains.
☑️ Check before button activation
⚠️ Warning: If the indicator flashes red 3 times in a row after pressing the button, this is the overheating error code.Stop the TV from the network for 30 minutes and make sure the vents on the back are not closed.
Method 2: Enabling with a remote control
Xiaomi remote TV Remote (model) R2156 series P1) If the TV doesn't respond to the buttons, check first:
- 🔋 Batteries: Even if the display on the remote is on, the discharged cells may not provide enough signal power. AAA).
- 📶 Distance and obstacles: The remote is 2.4 GHz and requires line of sight, maximum distance is 8 meters, but walls or furniture can block the signal.
- 🔄 Synchronization: After replacing batteries or resetting the TV, the remote can "unlock." To re-synchronize, hold the Home buttons. + OK 5 seconds.
Instructions for inclusion:
- Point the remote to the IR receiver (located in the lower right corner of the screen frame under the Mi logo).
- Press the power button (🔄) The indicator on the TV should light up white.
- If there is no reaction, hold the power button for 10 seconds – this will force the system to restart.
For models P1 43 with remote R2156 To turn on the TV with your voice, say "OK, Google, turn on the TV" (the microphone is located at the top of the remote).
💡
If the remote is lost, use the Mi Remote app (available for Android and iOS). TV P1 Connect via Bluetooth or Wi-Fi.
| The remote problem | Reason. | Decision |
|---|---|---|
| The monitor on the remote doesn't burn. | Batteries discharged. | Replace with new alkaline AAA |
| The remote works, but the TV doesn't respond. | Lost synchronization. | Hold Home. + OK 5 seconds |
| The buttons are pressed with a delay | Low battery charge | Replace batteries even if the light is on |
| Voice commands not recognized | Microphone contaminated | Wipe the top of the remote with an alcohol napkin |
Method 3: Forced start after failure or update
If you have a Xiaomi TV P1 43 hung on the Mi logo or the screen remains black after the firmware update, a forced reboot will be required.This procedure is safe and does not result in data loss (except for unsaved application settings).
Steps for compulsory inclusion:
- Turn off the TV for 30 seconds, it will drain the capacitors.
- Holding the power button on the case, connect the power cable back.
- Keep holding the button still. 10-15 A few seconds before the Mi logo appears.
- Release the button and wait for the system to boot (it can take up to 3 minutes).
If the TV is rebooted cyclically (on and off), it indicates firmware damage.
- 🔧 Try recovery through USB: Download the official firmware for P1 43 From Xiaomi Support, unpack the archive and place the file update.zip flash-root FAT32).
- 📁 Connect the flash drive to the port USB 2.0 on the back of the TV (port) USB 3.0 is not suitable for firmware!).
- 🔄 Hold the power button and the Volume button – (on the back) at the same time for 10 seconds – this will trigger the recovery mode.
What to do if the firmware is interrupted?
⚠️ Note: Do not use firmware from other models (for example, from Xiaomi Mi). TV 4S). This will result in a blink (complete failure) of the device. update.zip And be at the root of the flash drive without nested folders.
Method 4: Enabling after reset to factory settings
If you have performed a Factory Reset via the settings menu or button service combination, Xiaomi TV P1 43 may require additional actions for the first actuation.The process is different from a normal start-up:
Step-by-step:
- Connect the TV to the network and press the power button, and the Welcome window will appear on the screen.
- Select the language (Russian is recommended for the correct work of the voice assistant).
- Connect to the Wi-Fi network. P1 43 critically important to use 2.4 GHz network – 5 GHz may not be supported during the setup phase.
- Accept the terms of use and wait until the initial setup is completed (takes up). 5-7 minute).
If the TV is not turned on after reset:
- 🔌 Check that the reset has passed completely: the indicator on the front panel should flash blue (not white) when you press the power button.
- 📡 Make sure the router is giving away DHCP (automatic IP). If not, set up a static setting. IP manually.
- 🔄 If the settings are suspended during the Wi-Fi connection stage, disconnect the TV from the network for 10 seconds and try again.
On the model. P1 43 after reset, the sound may disappear, and this involves automatically selecting the wrong audio output:
- Go to Settings. → Sound. → Exit.
- Choose. TV Speaker (built-in speakers).
- Turn off the option. HDMI ARC, if she's active.
Method 5: Emergency activation via service menu
If you have a Xiaomi TV P1 43 doesn't respond to a button or remote, but the power indicator is on, you can try to run it through the service menu.
Instructions:
- Turn off the TV.
- On the back, find the Volume button - (located next to the connector). AV IN).
- Holding Volume - Connect the power cable back.
- Keep holding the button. 10-12 seconds until the service menu appears on the screen (white text on a black background).
On the service menu:
- 🔧 Use the Volume buttons +/– for navigation OK (power button) for selection.
- 📊 Select Reboot System to restart or Factory Reset to reset completely (data will be deleted!).
- 🔄 After selecting the item, wait for the automatic restart (do not turn off the power supply!).
💡
The service menu is designed for diagnostics and recovery, and do not change the settings that you do not know the names of, which can cause the TV to fail.
⚠️ Note: If there is an error in the service menu E001 or E002, This indicates that the system files are damaged, and in this case, you need to flash through the system. USB (see method 3).
Method 6: Diagnostics of malfunctions by indicator
Indicator on the front panel of Xiaomi P1 43 signals the state of the TV, and decoding the blinking will help determine the cause of the malfunction:
| Color of indicator | Blinking mode | Meaning | Action |
|---|---|---|---|
| White | It's burning all the time. | TV on. | Check the source of the signal (HDMI, antenna) |
| White | Blinks 1 time per second | Team waiting (standby mode) | Press the power button on the remote or body |
| Red. | Blink 3 times in a row | Overheating | Turn off the TV for 30 minutes, check the ventilation |
| Blue | Fast flashing (2 times per second) | Firmware update | Don’t turn off the power, wait until it’s finished. |
| No glow. | — | No food. | Check the cable, socket, power supply |
If the light flashes red 5 times, it's a power supply error.
- 🔌 Check the voltage in the socket (should be) 220-240V).
- 🔧 Inspect the power supply for swollen capacitors or the smell of burning.
- 📞 Contact the service - self-repair of the power supply is dangerous!
For the model P1 43 is characterized by a problem with the backlight of the screen: the TV turns on (the indicator burns white), but the image is missing:
- 💡 Faulty. LED-tape (replacement required).
- 🔌 Damage to the lighting cable (often after a fall or impact).
- 📺 Failure in the lighting driver (solved by flashing the flashing).
Frequent Mistakes and How to Avoid Them
Xiaomi users P1 43 are often faced with typical power-on errors, and here are the most common ones and ways to prevent them:
- 🔌 Using an extension cord without grounding: the TV may not turn on or spontaneously turn off. P1 43 directly to the grounded outlet.
- 📡 Connect to 5GHz Wi-Fi at setup stage: After reset, the TV only supports 2.4GHz. switch the router to mixed mode or temporarily turn off 5GHz.
- 🔄 Interrupting firmware updates: if the process is delayed (more than 20 minutes), do not turn off the power.
- 🔋 Use of a non-original power supply: even if the connector is suitable, inappropriate parameters (12V 3A for P1 43) may cause failures.
Another common problem is that the TV turns on but turns off.
- 🔌 Short circuit in the power supply chain (check the cable for damage).
- 📦 Failure in the eMMC module (internal memory.
- 🔧 Malfunction of the motherboard (requires diagnosis in the service).
💡
If the TV is turned on only after multiple presses of the power button, it is a sign of wear of the contacts of the button. Temporary solution is to use the remote. Permanent fix requires replacing the micro-switch (cost of repair) ~1500 rubles.).