How to turn on the Xiaomi Mi TV: all ways and troubleshooting

Why Xiaomi Mi TVs may not be on?

Xiaomi Mi TVs (including the Mi TV 4A, Mi TV 4S, Mi TV 5 and Mi TV Q1/Q2) usually start instantly — just press a button on the remote or control panel. But what if the screen remains black, the indicator does not burn, or the device “hangs” after the update?

From the banal lack of power (plugged out the plug, the network filter went off) to software failures after a failed firmware update. 80% of the time, the problem is solved without going to the service center, you just need to know the right sequence of actions. This article covers all official and alternative ways of inclusion, including emergency methods for "brick" TVs.

If your Mi TV doesn't respond to the remote, check the obvious first: whether the outlet is working (plug in another device), whether the power cable is damaged, whether the indicator on the front is on, whether the red or white LED signals that the TV is getting electricity, so the problem lies in the software part or the control panel.

Method 1: Enable by using a standard remote

The main way is to use the original Xiaomi Mi Remote remote, and even if the TV seems dead, try this sequence:

• 🔋 Make sure that the remote has batteries (replace with new ones if the indicator does not burn when you press the buttons).
• 📺 Point the remote directly to the TV’s IR receiver (usually located at the bottom right or in the center below the screen).
• 🔘 Press and hold the Power button for 5-10 seconds.
• 🔄 If the TV doesn’t respond, try the combination: Menu + Back (holding 10 seconds).

On the Mi TV 5 Pro and later, the remote can be Bluetooth-type (without an IR transmitter).

1. Hold the remote up to 10 cm from the TV.
2. Press Power and wait 3-5 seconds – the download menu should appear.

Method 2: Hardware buttons on the TV body

All Xiaomi Mi TVs are equipped with physical control buttons that duplicate the functions of the remote, and their location depends on the model:

Instructions for inclusion:

1. Find the Power button (usually marked with a dot or icon) ⊙).
2. Press and hold it for 10-15 seconds until the indicator lights up.
3. If the TV is “hang” on the Mi logo, perform a forced reboot: turn off the power for 1 minute, then turn it on again.

Method 3: Enable via Mi Remote

If the original remote is lost or faulty, use the official Mi Remote app (available for Android and iOS) that emulates all the features of the physical remote, including turning on the TV.

Step-by-step:

1. Download the app from Google Play or the App Store.
2. Connect your smartphone and TV to the same Wi-Fi network.
3. Launch the app, select Add Device → TV → Xiaomi.
4. Follow the instructions on the screen to pair (entry may be required) PIN-TV-code).
5. After connecting, press the virtual Power button.

If your TV is not connected to Wi-Fi, use Bluetooth:

• 📱 Turn on Bluetooth on your smartphone.
• 🔍 In the Mi Remote app, select Connect via Bluetooth.
• 🔗 Wait for the TV to be detected (the model should appear in the list).

Method 4: Forced reset (if the TV is “hang”)

If the Mi TV is turned on but stuck on the Mi logo or black screen, a hardware reset will help, a technique that is also relevant after a failed firmware update.

Instructions for Mi TV 4A/4S/5 models:

1. Turn off the TV from the outlet.
2. Press and hold the Power button on the body.
3. Without releasing the button, connect the power back.
4. Hold the Power for another 15-20 seconds until the recovery menu appears.

For the Mi TV Q1/Q2 and the new models:

1. Turn off the power.


2. Press the Input (or Menu) button on the body.




3. Connect the power cable by holding the 10 seconds button.




4. Release when the Fastboot logo appears on the screen.

⚠️ Warning: Forced reset deletes all user settings, including accounts and installed applications.

Method 5: Enable after the firmware update

If the TV stopped turning on after automatic or manual updating, the problem may be in the damaged firmware, in which case the flashing over USB will help.

What you need:

• 🖥️ A flash drive. FAT32 (up to 8 GB).
• 📁 Official firmware for your model (download at miuirom.xiaomi.com).
• 🔌 Cable OTG (for some).

Step-by-step:

1. Download the firmware for your model (for example, mi_tv_5_pro_global_*.zip).
2. Unpack the archive and copy the update.zip file to the root of the flash drive.
3. Put the flash drive in. USB-TV port (use port of the TV) USB 2.0 if there are several).
4. Press and hold the Power + Volume button for 10 seconds.
5. From the recovery menu, select Apply update from USB.

Solving problems with the power indicator

The color and behavior of the indicator on the front panel help diagnose the problem:

If the indicator flashes red at intervals of 3-5 seconds, this indicates a hardware error (for example, a malfunction of the motherboard or power supply).

• 🔌 Check the power cable for damage.
• 🔄 Try another network filter or socket.
• 🛠️ If the problem persists, contact the service center (possible replacement of the power supply unit).

Frequent Mistakes and How to Avoid Them

Many users make the problem worse by doing the wrong thing, and here's what you can't do if the Mi TV doesn't turn on:

• ❌ Repeatedly pressing the Power button in a row – this can lead to a system lock.
• ❌ Turn off power during the upgrade (blue indicator) This is almost guaranteed to "brick" the TV.
• ❌ Use unofficial firmware without backup.
• ❌ Disassemble the TV yourself without experience - the risk of damage to plumes and boards.

If you suspect that the problem is in the power supply, check it using the following algorithm:

1. Turn off the TV.
2. Remove the back cover (only if you are confident in your abilities!).
3. Check the fuse on the board of the power supply (should be whole).
4. Inspect the capacitors – if they are bloated, the unit must be replaced.

⚠️ Warning: Working with the TV's internal components is dangerous - even after disconnecting from the network, the capacitors can store charge.

FAQ: Answers to Frequent Questions