How to turn on Xiaomi phone after resetting: 5 working methods

Resetting on Xiaomi smartphones is a standard procedure for solving software failures, preparing a device for sale or eliminating viruses. However, after a hard reset, many users face a problem: the phone does not turn on or hung on the Mi logo. The reasons can vary from incorrect completion of the process to damage to system files. In this article, we will analyze all possible scenarios and give step-by-step instructions on how to bring the smartphone back to life.

It is important to understand that the recovery process depends on the device model (e.g. Redmi Note 10 Pro or POCO X3), the firmware version (MIUI 12/13/14) and the type of reset (via the Settings menu or button combination). If you reset via Recovery Mode, the algorithm of actions will differ from the case when the phone spontaneously restarted after the update. We will consider both options, as well as rare situations when you need to flash over the PC.

Before you start your recovery, check:

• 🔋 Battery level (minimum 30%) – otherwise the device may turn off during the process).
• 🔌 Cable and charger fault (use the original Xiaomi accessory).
• 📱 No physical damage (cracks on the screen, moisture ingestion).

1. Basic start after reset via the settings menu

If you reset via Settings → About Phone → Reset, the recovery process is as simple as possible. Once you reboot, the device should automatically start in MIUI Setup Wizard. Here's what to do next:

1. wait for the Mi logo to appear (usually takes 1-3 minutes).

2. Follow the instructions on the screen: select a language, connect to Wi-Fi, sign in to your Mi Account (if linked).

3. During the data recovery phase, select Skip if you do not need backups.

⚠️ Note: If the error "This device is locked" appears on the screen, then Mi Account protection is activated on the phone. To unlock, you will need to enter the username and password from the account to which the device is associated. Without this data, further configuration is impossible – you will have to contact the Xiaomi service center.

💡

If the phone is stuck in the Wi-Fi setup phase, try connecting later. Click Skip and use mobile internet (if supported).

2 What to do if Xiaomi does not turn on after a hard reset

The situation is complicated if the reset was performed through Recovery Mode (volume up + power combination), and after the reset the screen remains black or the Mi logo burns for more than 10 minutes.

• 🔄 Interrupted discharge process (for example, battery is dead).
• 📛 Damage to section /system or /data.
• 🔧 Incompatibility of firmware versions (for example, after manual downgrade).

Decisions:

1. Forced reboot: Press Power + Volume down for 15 to 20 seconds. If the phone vibrates, release the buttons and wait for the launch.
2. Download to Safe Mode: Hold Power until the menu appears, then select Safe Mode. This mode disables all third-party apps.
3. Re-reset via Recovery: Log in to Recovery Mode and select Wipe Data → Wipe All Data.

⚠️ Warning: If the phone is forced to restart and it produces a "No command" error with the robot lying down, it means that the bootloader is damaged, in which case only flashing through the Mi Flash Tool (more about this below) will help).

Time-consuming (the process can take up to 30 minutes)|Use the original cable USB|Check the battery charge (minimum 50%)|Prepare a backup of important data (if possible)-->

Recovery through the Mi Flash Tool (for power users)

If standard methods don't work, you'll have to refashion the device via a PC, which is suitable for Xiaomi, Redmi and POCO models, but requires:

• 💻 Windows computer 7/10/11.
• 🔌 Cable. USB (preferably original).
• 📥 Fastboot firmware ROM For your model (download from the official website).
• 🛠 Mi Flash Tool (last version).

Step-by-step:

1. Install Xiaomi drivers on PC (you can download here).
2. Unpack the firmware archive into a folder without Cyrillic characters (e.g., C:\Xiaomi\ROM).
3. Turn off the phone, then press Volume Down + Power to log into Fastboot Mode.
4. Connect the device to your PC and start the Mi Flash Tool.
5. In the program, click Select, specify the path to the firmware folder, then select Clean all (full cleaning) or Clean all and lock (with bootloader lock).
6. Press Flash and wait until it is completed (10-15 minutes).

⚠️ Warning: Continuous display of "Waiting for device" progress in the Mi Flash Tool means drivers are not installed or the cable is faulty. USB-port (preferably) USB 2.0) or reinstall drivers manually through Device Manager.

4 Unlocking Mi Account after reset

One of the most common problems after a reset is requesting a link to your Mi Account, and even if you forget the login details, there are several ways to get around the lock:

Official method (if you remember the login / password):

1. On the lock screen, select Forgot password.
2. Enter the linked email or phone number.
3. Follow the instructions to restore access.

Unofficial methods (at your own risk):

• 📧 Using the Mi Account Unlock Tool (requires an unlocked bootloader).
• 🔓 Passage EDL Mode (for power users only, risk of bricking").
• 📞 Appeal in support of Xiaomi with proof of ownership of the device (check, box).

⚠️ Warning: Attempts to bypass Mi Account through third-party services can lead to a complete lock of the device. Since 2023, Xiaomi has tightened its security policy: after 3 failed attempts to enter a password, the phone is locked for 72 hours.

5. Frequent errors and their solutions

When Xiaomi recovers from a reset, users face typical problems.

This MIUI version cannot be installed on this device

✅ Solution: Download the correct firmware version for your model. Check the device code in Fastboot Mode (e.g. tucana for Redmi Note 8 Pro) and select the appropriate one. ROM official website.

Mistake: "Invalid image"

✅ Solution: Re-unpack the firmware archive. Make sure the folder path does not contain Cyrillic characters or spaces.

Error: "Device is locked. Please unlock first"

✅ Solution: Unlock the bootloader through the official Xiaomi tool.The process takes up to 72 hours (Mi Account binding required).

Error: The phone vibrates but does not turn on

✅ Solution: This is a sign of damage to the battery or motherboard. Try charging the device with another cable for 30 minutes.

💡

90% of the problems after a reset are due to firmware incompatibility or installation errors. Always use Xiaomi’s official ROM and check the version before you install it.

6. Prevention of problems in future discharges

To avoid repeated complications, follow these guidelines:

• 🔄 Before resetting, untie Mi Account in settings (Accounts) → Mi Account → Delete the account).
• 📱 Create a backup through Settings → Additionally. → Backup.
• 🔋 Charge your phone to at least 50% before resetting.
• 📥 Download the latest version of Recovery ROM For your model (in case of recovery).

If you often experiment with firmware, consider unlocking the bootloader. ROM (For example, LineageOS or Pixel Experience, but you will be deprived of the official warranty. XDA Developers.

⚠️ Note: On Xiaomi models with MediaTek processors (e.g. Redmi) 9A or POCO C31) Unlocking the bootloader can lead to loss IMEI. Before the procedure, save a backup copy of the section NVRAM tool-wise MTK Droid Tools.

FAQ: Answers to Frequent Questions