How to turn on the Xiaomi 10S smartphone: all the ways from basic to emergency launch

Xiaomi Mi 10S is the flagship of 2021 with Snapdragon 870 processor, which is still relevant due to the powerful stuffing and support for updates. However, even such reliable devices sometimes refuse to turn on: after discharge, software failure or mechanical damage. If your Mi 10S does not respond to the power button, do not panic - in 90% of cases, the problem can be solved yourself.

In this article, we’ll look at all the possible ways Xiaomi 10S can turn on, from the standard procedure to forced reboot and recovery via Fastboot. You’ll also learn how to distinguish a software glitch from a hardware breakdown, and what to do if the smartphone only turns on in charging mode or shows the MI logo and turns off.

The material is prepared taking into account the current MIUI 14/15 firmware and the features of the Mi 10S iron (model M2011J2SC for the global version). If your smartphone is modified (for example, a custom recavator is installed), some methods may not work, we will warn you about this in advance.

1. Standard inclusion of Xiaomi 10S: step-by-step instructions

Start with the basic method, which works if the battery is charged and the system is not locked. Here's how to turn on the Mi 10S correctly:

1. Connect your smartphone to a charger (preferably the original one with a 33W unit). Wait 5-10 minutes - even if the indicator does not burn, the battery could run out to zero.

2 Press and hold the power button (located on the right) for 3-5 seconds until the MI logo appears.

3.If the screen caught fire but the further loading stopped on the logo, wait up to 10 minutes - sometimes the system takes a long time to check the integrity of files after updating.

✅ Signs of successful inclusion:

• 🔋 Vibration when pressing the power button
• 📱 Appearance of the logo MI black-and-color
• 🔄 Download animations MIUI (white-circle)

❌ If the smartphone does not respond:

• 🔌 Try another charger (better with cable) USB-C)
• 🔄 Move to the next method: forced reboot.

💡

If the Xiaomi 10S is turned on but turned off immediately, check if the volume button is pressed down (sometimes it blocks the download in Fastboot mode).

2. Forced reset (Hard Reset)

If standard powering didn't work, try hardware reset, which simulates battery extraction and helps with system freezes, and note: all unsaved data in open applications will be lost.

Instructions for Xiaomi Mi 10S:

1. Turn off the smartphone from charging (if connected).
2. Press the buttons: Power + Volume Up Hold for 10-15 seconds until the screen goes out and the MI logo appears.
3. Release the buttons – the smartphone should start loading in normal mode.

🔍 What to do if the screen is black:

• 🔋 Connect the charger and repeat the procedure in 5 minutes
• 🔊 Check if the smartphone makes sounds (vibration) when you press the buttons – if so, the problem may be in the display

3. Enable via Fastboot mode

Fastboot mode is an engineering menu that allows you to restore your smartphone if it doesn’t load normally. For the Mi 10S, logging into Fastboot is like this:

1. Turn off the smartphone (if it is on, hold the power button until vibration).

2. Press the combination:

Food + Volume Down

Hold until the image of a hare in a hat-eared with the inscription Fastboot appears.

⚠️ Note: If you see a menu with items in English (Reboot, Recovery), then you have a custom recovery (for example, you have a custom recovery, TWRP). In this case:

• 🔄 Choose Reboot. → System for regular booting
• 🛠️ If the system doesn’t start, try Wipe. → Advanced Wipe (reset to factory settings)

📌 How to get out of Fastboot:

• 🔁 Select Reboot with volume buttons and confirm with the power button
• 🔌 If the smartphone does not respond, disconnect it from the PC / charge and hold the power button for 20 seconds.

Connect Xiaomi 10S to PC via USB-C| Install Qualcomm drivers (for Windows)| Download Mi Flash Tool (official Xiaomi website)| Disable antivirus (can block firmware)| Check battery power (minimum 30%)

-->

4.Recovery through Mi Flash Tool (for experienced)

If Xiaomi 10S only loads in Fastboot but doesn't turn on normally, the firmware may be damaged.In this case, flashing through the Mi Flash Tool will help. This method is only suitable for users with PC experience!

📋 Step-by-step instruction:

1. Download the official firmware for the Mi 10S (select the Fastboot version, not Recovery).
2. Unpack the archive in a folder without Cyrillic characters (for example, C:\Mi10S_firmware).
3. Connect your smartphone in Fastboot mode to your PC.
4. Launch the Mi Flash Tool, press Select and specify the path to the firmware folder.
5. Select Clean All mode and press Flash.

⚠️ Attention: Continuous power is critical! If the process is interrupted, your smartphone can turn into a brick. Use a laptop with a charged battery or UPS.

⏳ How long to wait:

💡

Fastboot removes all data, including photos and apps. If your smartphone has important files, try extracting them first through ADB (if you have root access).

5. Diagnostics of hardware problems

If none of these methods worked, it could be the hardware problem.

🔍 Signs of malfunction:

• 🔋 The smartphone does not charge (even after an hour on charging)
• 💥 There is a smell of burning or the device is heated in the off state
• 📵 No response to charging, buttons and PC connection
• 🌡️ The screen flashes or shows artifacts (strips, stains)

🛠️ What can be checked on your own:

1. Battery: Connect another charger. If the indicator is not on, try charging from the power bank.
2. Power button: Press it several times – if you hear a click or a backlash, the button may break.
3. Display: Light up the screen with a flashlight – if you see the image, the problem is in the backlight.

⚠️ Attention: If Xiaomi 10S If you fall into water or have been hit, don't try to turn it on again, it can cause a short circuit.

📊 Cost of repair (example):

6. Frequent mistakes and how to avoid them

Many users make the problem worse with the wrong actions. Here's what you can't do if the Xiaomi 10S doesn't turn on:

❌ Error 1: Connect your smartphone to cheap charging or power bank without Quick Charge support.

✅ Solution: Use the original Xiaomi adapter on the 33W Certified analogue (e.g. Anker).

❌ Mistake 2: Press the power button too short (less than 3 seconds) or too long (more than 20 seconds).

✅ Solution: Hold the button exactly 5-7 seconds – this is enough to trigger.

❌ Error 3: Interrupt the firmware through the Mi Flash Tool or disable it USB during the process.

✅ Solution: Laptop charging needs to be connected and cable USB-C — reliably.

❌ Mistake 4: Ignore signs of overheating (for example, if your smartphone is hot to the touch).

✅ Solution: Let the device cool for 30 to 60 minutes before retrying to turn on.

💡 Expert advice:

💡

If the Xiaomi 10S turns on but shuts off immediately, try booting into Safe Mode (Safe Mode). To do this, hold the power button until the logo appears, then immediately press and hold the volume down until the Safe mode sign appears at the bottom of the screen, which will help to check if the third-party app is to blame.

7. Alternative ways of inclusion

If standard methods do not help, try these non-obvious techniques:

🔌 Method 1: Charging from another source

• 🔋 Connect your smartphone to charging from a laptop (USB-port 3.0) or TV with USB.
• 🕒 Wait 1-2 hours – sometimes a weak current helps to wake up the power controller.

📱 Method 2: Use of cable OTG

• 🔌 Connect to Xiaomi 10S through OTG-mouse-adapter.
• 🖱️ If the device is turned on, but the screen is not working, the mouse cursor will help unlock it.

🔊 Method 3: Sound signal

• 🎵 Connect your headphones and try to turn on your smartphone – sometimes the boot sound helps diagnose the problem (for example, if the screen is not working, but the system is loading).

📡 Method 4: Wireless charging (if supported)

⚠️ Xiaomi Mi 10S It doesn't officially support wireless charging, but some users are adapting modules from other models. If you've been installing this solution, try charging your smartphone through a Qi panel.

FAQ: Answers to Frequent Questions