Getting root rights to Xiaomi Redmi 6A: expert guide

Budget smartphone owners often face the limitations of a standard MIUI shell that doesn’t allow you to remove system debris or fine-tune energy saving. Xiaomi Redmi 6A, despite its modest characteristics, has the potential to be unlocked only with superuser rights. Getting root access opens the door to installing modified cores, completely removing ads and deep customizing the interface.

However, this process is not without risks and requires careful attention to detail. Any interference with the system partition of Android can lead to loss of warranty or, in the worst case, to turn the device into a “brick”. Before starting any manipulation, you must clearly understand the responsibility and have all the necessary tools at hand.

In this article, we will discuss in detail the algorithm of actions that will allow you to become a full owner of your gadget. We will not use questionable "single-button" programs, but apply a proven method using Magisk and unlocked bootloader, which is the gold standard in the world of Android modification.

Preparation of the device and collection of necessary tools

The first step is to get the workplace and the smartphone ready, and you're going to need a Windows computer that's working. USB-Without a high-quality cable that can transmit data, not just charge the battery, the whole process can end up with an error in the connection phase.

You need to download and install current ADB and Fastboot drivers on your PC, and you should also download Google's Tools platform, which contains the necessary console snails, and you will need an archiver that supports the.zip or.tar format to extract the image of the boot partition to work with the firmware.

• 📱 Charge the Xiaomi Redmi smartphone 6A minimum 70-80%, to avoid sudden shutdown.
• 💻 Install the drivers. ADB/Fastboot Xiaomi USB Drivers on the computer.
• ☁️ Backup all important data as it will be deleted.
• 🔓 Register on the Mi Unlock website and link your account to your device.

⚠️ Warning: The process of unlocking the bootloader, which is a mandatory step, will result in a complete data reset (Wipe Data.

Pay special attention to the developer settings. You need to activate the hidden menu by clicking on the build number several times in the About Phone section. Then in the Settings menu → Advanced Settings → For developers, you should enable USB debugging and USB installation permission.

Unlocking the Bootloader bootloader

Without the unlocked Bootloader, you can't install a modified bootloader. Xiaomi has strict restrictions, so you can't just flash custom recavators. You first need to get official permission from the manufacturer through the Mi Unlock utility.

Once you have your account tied to your phone settings ("Mi Unlock Status"), you have to wait a certain amount of time, and the countdown timer is usually 168 hours (7 days), although in rare cases this period can be extended to 30 days, a security measure designed to protect users from device theft.

When the waiting time is up, put your phone into Fastboot mode, holding down the volume and power buttons at the same time, connect the device to your PC and launch the Mi Unlock Tool program. Log in the same account as your phone and press the Unlock button. The process will take a few minutes, after which the phone will restart and clear the data.

Creating a Patent Boot Image Through Magisk

The next critical step is to modify the boot image, and you’ll need an exact copy of the stock firmware installed on your Redmi 6A. You can find it on official resources or specialized forums, making sure the firmware version matches your current one.

You need to extract the boot.img file from the firmware archive, and that's what we're going to patch. Move that file to your smartphone, install the Magisk Manager app (better use the latest stable version in APK format), and start the patching procedure.

1.Open Magisk Manager


2. Press "Install" (Install)




3. Select "Select and Switch File"




4.Indicate the path to boot.img




5. Wait for the process to be completed

After successful completion, a file with a name like magisk_patched.img. It needs to be copied back to the computer in a folder with platform tools, and this file contains embedded superuser rights and is the key to the system.

Firmware of the modified loader

Now, we're going to directly record the changed image to the device's memory. Reset the smartphone to Fastboot mode (volume down + power buttons) and connect it to the computer. Open the command prompt or PowerShell in the ADB tool folder.

Check the connection by entering the command fastboot devices, if you see the serial number of the device, then the connection is established correctly. If the screen remains empty, reinstall the drivers or replace the driver. USB-cable.

For firmware use of the command fastboot flash boot magisk_patched.img. Be extremely careful when entering: a syntax error can cause the boot system to fail. After successfully recording an image, enter the fastboot reboot command to restart.

⚠️ Warning: Never interrupt the firmware process or disconnect the cable while running the flash command.This can damage the partition table, which will require difficult recovery through the flash command. EDL-regime.

💡

A successful boot image firmware is the moment when theoretical knowledge is converted into actual root access, and after the first boot, the system will be completely modified.

Rights Check and Basic Magisk Setup

Once you reboot, you'll see the Android Welcome screen. Go through the initial setup and wait for the desktop to load full. Find the Magisk icon in the app menu. If it shows the version when it's launched, instead of offering additional customization, congratulations, root rights are obtained.

Within the app, the status of Magisk and Zygisk should be green. If you see the sentences "Additional Customization" or "Reboot Requires," agree to them. This is necessary to implement Magisk at the boot level.

• 🛡️ Enable “Magisk Hide” or configure DenyList to hide the root from banking apps.
• 🔌 Install MagiskHide Props Config to change system properties.
• 🧹 Use Root Explorer to access system files.

Now you can remove system applications that were previously uninstalled, such as Mi Video or GetApps services that often take up space and consume resources, but without superuser rights, they cannot be removed.

Possible problems and methods of solving them

When modifying the Xiaomi Redmi 6A, you may encounter unexpected situations, and users often experience a “bootloop” (cyclical reboot). If the phone is stuck on the Mi logo, try pressing the power and volume buttons up to enter Recovery mode and perform a data reset (Wipe Data).

Another common problem is that the Internet is broken after the firmware, which may be due to a conflict between the modified kernel and network settings, in which case the flashing of the stock boot.img and subsequent repatch, but using a different version of Magisk, helps.

💡

If banking apps stop working, don’t rush to remove the root.In Magisk settings, turn on Zygisk and add problematic apps to the Denilist, then restart.

It’s also worth remembering that once the bootloader is unlocked, the Widevine L1 stops working, which means that it’s impossible to view HD content on some streaming platforms. It’s almost impossible to return the L1 without re-locking the bootloader (which is difficult and risky).