How to completely delete Mi Account on Xiaomi Redmi Note 4X, if you forget the password: Step-by-step instruction 2026

Introduction: Why Deleting a Mi Account Without a Password Is a Difficult Task

Mi Account is a binding feature for all Xiaomi smartphones, including the Redmi Note 4X (codenamed mido), which provides data synchronization, access to cloud services, and unfortunately becomes a headache if you forget your password. Unlike a Google account, where recovery takes a couple of minutes, Mi Cloud requires verification of identity via email or SMS β€” and if you don’t have access to tied contacts, the process turns into a quest.

The main problem: Xiaomi blocks most bypass methods through software updates. What worked in 2018-2020 (for example, a reset via EDL or a vulnerability in a bootloader) today often leads to a β€œbrick” of the device. In this article, we will look at the current ways to delete a Mi Account on Redmi Note 4X without a password – from official to technically complex, with an assessment of risks and chances of success.

Warning: Some methods require unlocking the bootloader, which will result in a complete data reset and may void the warranty. If your phone has important files, try restoring access through Xiaomi support first.

Method 1: Recovery of password through official channels

The safest and most legal way to do this is to use Xiaomi's tools to restore access, and even if you don't remember the password, the system offers a number of ways to verify your identity.

  • πŸ“§ Restore via email. If you have registered with a valid address, go to account.xiaomi.com, click "Forgot your password?" and select sending a link to your email. The link is valid for 24 hours.
  • πŸ“± Confirmation of SMS. If you have a phone number attached to your account, the system will send you a password reset code. SIM (For example, Google Voice is not suitable.
  • πŸ”‘ Backup email. Some users indicate an additional recovery address when registering. Check all your inboxes for no-reply emails.@xiaomi.com.

If none of these methods worked, try contacting Xiaomi support via:

  • πŸ’¬ Online chat on the site mi.com/support (available in English and Chinese).
  • ☎ Hotline phone: for Russia β€” 8 800 700-05-65, for other countries - list of numbers on the official page.

⚠️ Note: Xiaomi support can request a passport scan or a device purchase check to confirm ownership.Without these documents, the chances of deleting the account are minimal.

πŸ“Š What is the way to restore your Mi Account you have tried?
Email
SMS
Appeal of support
None of the above.

Method 2: Delete Mi Accounts through Hard Reset

If the official methods didn’t work, the next step is hardware reset. On the Redmi Note 4X, this is done via Recovery Mode. It’s important to understand that this method does not guarantee deleting the Mi Account, but it can work if:

  • πŸ”„ The device has an older firmware installed MIUI 10 (until 2019).
  • πŸ”“ Phone not tied to account after last reset.
  • πŸ“± The device is not locked through Find Device (Find the phone function").

Resetting instructions:

  1. Turn off the Redmi Note 4X.
  2. Press the Volume Up + Power buttons at the same time and hold for 10-15 seconds until the Mi logo appears.
  3. From the Recovery menu, select the language (volume buttons) and go to Wipe Data β†’ Wipe All Data.
  4. Confirm the reset by selecting Confirm.
  5. After the reboot, check if the system requests a password from your Mi Account.

⚠️ Attention: On firmware MIUI 11+ Recovery reset often results in FRP-In this case, the phone will require data input from a previously linked Xiaomi or Google account.

β˜‘οΈ Preparation for Hard Reset

Done: 0 / 4

Method 3: Using Fastboot Mode to Unlock

If Recovery resets don't work, the next level is Fastboot, USB-The bottom line: we delete the files responsible for the account's association through low-level commands.

Warning: Failure to do the wrong thing in Fastboot can permanently shut your phone down. If you're not sure about your abilities, skip this section.

What you need:

  • πŸ–₯️ Computer with Windows/Linux and installed drivers ADB/Fastboot (You can download it on the Android website).
  • πŸ”Œ Original. USB-cable (don’t use cheap Chinese cables – they may not transmit data).
  • πŸ“„ Firmware for Redmi Note 4X (Mido version – download from the official website.

Step-by-step:

  1. Connect the Redmi Note 4X turned off to the PC, holding Volume Down + Power to log into Fastboot.
  2. Open the command prompt (cmd) in the folder with the platform-tools and execute the command: fastboot devices Make sure that the device is determined (serial number should appear).
  3. Unlock the bootloader (if not unlocked): fastboot oem unlock Attention: this will erase all data!
  4. Squeeze the modified boot.img (For example, with the Magisk patch, to get root access: fastboot flash boot patched_boot.img
  5. Restart your phone and delete files with Root Explorer: /data/system/mi_account.xml /data/system/miui_activation.xml
Action.RiskChance of success
Unlocking the bootloaderData loss, possible brick70%
Firmware patch boot.imgViolation of system integrity50%
Deletion of account filesUnstable work MIUI80%
What if the fastboot can’t see the device?
1. Check if debugging is included on USB in the developer settings (if the phone is turned on). 2. Install Qualcomm drivers HS-USB QDLoader 9008 manually via Device Manager. 3. Try another one USB-port (preferably) USB 2.0 on the back of your PC). 4. Disable the antivirus – it can block fastboot as potentially dangerous software.

Method 4: Bypass Mi Accounts through EDL (Emergency Mode)

EDL (Emergency Download Mode) is a low-level firmware mode for Qualcomm devices. On the Redmi Note 4X (Snapdragon 625), this method allows you to reflash the phone without locking.

  • πŸ”§ Authorized Xiaomi account to unlock EDL (Xiaomi has closed public access since 2020).

Step-by-step process:

  1. Put the phone in mode. EDL: πŸ”Œ Connect the device off to the PC. πŸ”§ Close the test points on the motherboard (requires disassembly of the phone) or use a cable with a transfer button in the motherboard. EDL.

Qualcomm HS-USB QDLoader 9008

Mi Flash Tool

Fastboot

Clean All

⚠️ Note: Incorrect Firmware Through EDL The communication module can permanently damage (IMEI, Wi-Fi, Bluetooth, and this method is recommended only for advanced users or in service centers.

πŸ’‘

If you are not sure about your rationing skills, buy ready-made EDL-Cable for Xiaomi on AliExpress (cost) ~500–1000 β‚½). Search for "Xiaomi" EDL Cable 9008".

Method 5: Alternative methods (at your own risk)

If the official and technical methods didn't work, you can find some "grey" methods of bypassing Mi accounts online, and we don't recommend using them, but for the sake of completeness, we'll list:

  • πŸ•΅οΈ Purchase of β€œunlocking code” on specialized forums (for example, 4PDA or XDA Developers. Costs range from 300 to 2000 β‚½, but there's a high risk of fraud.
  • πŸ“± Using firmware holes through applications like the Mi Account Unlock Tool. MIUI (until 2021).
  • πŸ”„ Custom Recovery firmware (TWRP) and delete system files. Requires an unlocked bootloader.

All of these methods violate Xiaomi’s user agreement and can result in IMEI blocking or loss of warranty, and Mi Account lock may return after the firmware update.

πŸ’‘

The only legal and safe way to delete a Mi Account without a password is to contact Xiaomi with proof of ownership of the device.

What do you do if nothing helps?

If all of these methods fail, you have three options:

  1. Official SCs have access to internal unlock tools, but the service is paid (from 1000 to 3000) β‚½). List of centers on the Xiaomi website.
  2. At sites like Avito or Yula, there is a demand for locked devices, which are bought for spare parts or unlocked through acquaintances in the STS.
  3. Use a phone without a Mi Account. Some features (such as synchronizing notes or cloud backup) will not be available, but the basic features (calls, SMS, camera) will remain.

If you decide to put up with locking, here’s what you can do for comfortable use:

  • πŸ“± Install an alternative launcher (like Nova Launcher) to change the interface.
  • πŸ”’ Turn off notifications from Mi Cloud in settings.
  • πŸ“ Transfer important data to SD-card.

FAQ: Frequent questions about deleting Mi Account on Redmi Note 4X

Can I delete my account without losing data?
No. All methods except password recovery through support result in a phone reset. If there are important files on the device, try connecting it to your PC in MTP mode and copy the data before resetting.
What is FRP-blocking and how to get around it on Redmi Note 4X?
FRP (Factory Reset Protection - Android protection that requires data input from a previously linked account after a reset. on Redmi Note 4X You can bypass it: Swipe modified firmware through Fastboot. MIUI 9–10 (For example, through the TalkBack app. OTG-file-line FRP_Bypass.apk (It doesn't work on all versions. MIUI 12+ Most of the rounds stopped working.
How much does it cost to unlock a Mi Account in the service center?
Cost depends on the region and status of the SC: Official centers Xiaomi: 1500-3000 β‚½. Informal workshops: 800–2000 β‚½ (risk of running into fraudsters. Self-unblocking through EDL: 500–1500 β‚½ (cable + Before contacting, check whether you give a guarantee of the result.
Can I connect a new Mi Account after deleting the old one?
Yes, but with reservations: If you delete your account through a reset or firmware, the new account will be linked without any problems. If you use "grey" methods (for example, patched boot.img), the system can block the binding until the next update. Some firmware (MIUI 13+) requires you to wait 7-14 days before re-assigning.
Why does the phone not catch the network after running through EDL?
This is a typical problem when running through EDL. Causes: Damaged modemst1/modemst2 (Communication files) Mismatch between firmware and phone models (e.g., flashed mido with firmware from mido_note4). Recording error IMEI. Solution: Sweat your phone again with the Clean All tick or restore it IMEI via Engineer Mode (##4636##).