How to completely delete your Google account on Xiaomi Redmi 4A: 5 proven ways

Deleting a Google account with Xiaomi Redmi 4A can be necessary for many reasons: you sell a phone, want to change your profile or have a synchronization error. However, on this model, the process is complicated by an outdated version of MIUI (most often MIUI 8/9 based on Android 6.0/7.1), the lack of modern menus and the risk of activating FRP-blocking (Factory Reset Protection).

In this article, we will discuss all the working ways to delete a Google account on Redmi 4A, from standard deletion through menus to bypassing FRP without losing data. We will focus on the nuances for this model, for example, why Settings → Accounts can not always be removed, and what to do if the phone requires a password after a reset.

1. Preparation for removal: what to do before the start

Before you start deleting your account, follow a few critical steps to avoid locking your device or losing important data.

• 🔄 Sync contacts and files. Go to Settings → Accounts. → Google and make sure that sync is enabled for Contacts, Calendar and Photos (if you use Google Photos).
• 📱 Save a backup. Use it. MIUI Backup (Settings) → Additionally. → Backups or third-party utilities like Titanium Backup (requires root).
• 🔐 Make sure you know your password. If you forget your account information, restore it through Google's recovery page. FRP it's harder.
• 📶 Connect to Wi-Fi. Some methods (like Fastboot reset) require a stable internet connection.

If you plan to sell or transfer your phone, make sure to reset to factory settings after deleting your account, otherwise the new owner may face a requirement to enter your data.

⚠️ Attention: On Redmi 4A firmware-old MIUI 10 After deleting your account through settings, you may be left with a "link" to your device, which will cause the error "This phone has been reset. Enter your last Google account" the next time you turn on. To avoid this, use the methods in the bypass section. FRP.

Synchronized contacts and files|Backup created|Known password from Google account|Phone connected to Wi-Fi|Two-factor authentication disabled (if enabled)-->

2. Method 1: Standard removal through phone settings

The easiest method is to delete your account through the Settings menu, which is suitable if:

• 📱 You don’t plan to drop your phone before factory settings.
• 🔓 You have access to the device menu (the pattern lock is not blocked).
• 📅 Firmware is newer MIUI 8.5 (on older versions, the menu may not be available).

Instructions:

1. Open the settings (cog icon on the desktop).
2. Go to Accounts (or Sync on some versions).
3. Select Google and tap your account.
4. In the upper right corner, press three dots (⋮) and select Delete Account.
5. Confirm the action by entering the password or pattern lock of the phone.

If there is no Delete Account, try an alternative route:

Settings → All settings → Accounts and sync → Google → [Your account] → Delete

⚠️ Attention: On Redmi 4A s MIUI 8 after such deletion, there may be a "shadow" of the account in the system. To completely clear the binding, perform a hard reset before deleting the account through the settings.

💡

If your phone stops syncing your email or calendar after you delete your account, restart your device. Sometimes Google services freeze and require a restart.

3. Method 2: Removal through reset to factory settings (Hard Reset)

If the standard method didn’t work or you want to clean your phone completely before selling, do a hard reset, which will delete all data, including apps, photos and settings, so back up first.

Instructions for Xiaomi Redmi 4A:

1. Turn off the phone.
2. Press the Volume Up (+) and Power buttons simultaneously before the Mi logo appears.
3. Release the buttons and you will be taken to the Recovery menu (in English or Chinese).
4. Use volume buttons for navigation and power button for selection. Select Wipe Data (or Chinese firmware).
5. Confirm the reset by selecting Yes.
6. Once completed, select Reboot to reboot.

If after reset, the phone requires you to enter data from your previous Google account, then it worked. FRP-To get around it, go to section 5.

Yeah, after the dump.|Yeah, after buying a used phone.|No, I didn't know about that function.|I remember.-->

Method 3: Delete your account via Fastboot (for power users)

This method is suitable if:

• 🔧 You have access to a computer with Xiaomi drivers installed.
• 📦 The phone is determined in Fastboot mode (checked by the command of fastboot devices).
• 🔓 You are ready to work with the command line.

Warning: The wrong commands in Fastboot can permanently damage the firmware. If you're not sure, skip this section.

Instructions:

1. Install Google’s Platform Tools on your PC.
2. Turn off Redmi 4A and press Volume Down (-) + Power to log into Fastboot.
3. Connect your phone to your PC via USB.
4. Open the command line in the folder with Platform Tools and type:

fastboot oem clean_frp


fastboot reboot

If the team clean_frp It is not supported, try it:

fastboot erase frp


fastboot reboot

After the reboot. FRP-The lock will be reset and you can set the phone as new.

⚠️ Note: Some versions of Redmi 4A (Especially with Chinese firmware, fastboot oem commands can be blocked, and only flashing through the firmware will help. EDL-Mode (requires an authorized Xiaomi account).

Method 4: Bypass FRP-lock-in 4A (If the phone requires an old account)

If the phone shows a message after the reset, "This phone has been reset. Enter the last Google account," then Factory Reset Protection (FRP) has been activated. Redmi 4A can bypass it in several ways.

Method 1: Emergency Call (for MIUI 8-9)

1. On the FRP lock screen, press Emergency Call.
2. Dial ##4636## and the test menu will open.
3. Go to Settings and turn off Developer Features (if enabled).
4. Go back and select Add a Google account.
5. Enter the new account details – the lock will be reset.

Method 2: Through APK-file (requires) OTG-cable)

Download the file to the flash drive. FRP Bypass APK (QuickShortcutMaker, connect it to your phone. OTG-Adapter and install the application manually:

1. Open the installed application.
2. Find the Google Settings and run them.
3. Add a new account or delete an old one.

⚠️ Attention: Download APK-files only from trusted sources (e.g. APKMirror) Installing applications from unknown sites can lead to the infection of the phone with viruses.

💡

FRP bypass on Xiaomi Redmi 4A is only possible on firmware older than MIUI 10. On new versions of Android (8.0+), Google has closed most of the vulnerabilities, and requires an official reset through the previous account.

6. Method 5: Flashing the phone (extreme case)

If no methods work, you can still flash it through Fastboot or EDL, which will delete all data, including FRP, but requires:

• 🖥️ Computer with Qualcomm drivers installed (for EDL).
• 📦 Official firmware for Redmi 4A (You can download it on the Xiaomi website).
• 🔧 The Mi Flash Tool or SP Flash Tool (depending on the method).

Step-by-step instructions for Fastboot:

1. Download the firmware in.tgz format and unpack it.
2. Install the Mi Flash Tool.
3. Press Volume Down (-) + Power to enter Fastboot.
4. Connect your phone to your PC and start the Mi Flash Tool.
5. Select a folder with unpacked firmware and press Flash.
6. Wait for the finish (5-10 minutes) and restart the phone.

For firmware via EDL (if Fastboot doesn't work):

1. Install the Qualcomm HS-USB QDLoader 9008 driver.


2. Close the test points on the board (requires disassembly of the phone).




3 Connect the phone to a PC, and it's defined as QHUSB_BULK.




4. Run the Mi Flash Tool and run the firmware in EDL mode.

⚠️ Attention: Firmware through EDL Without an authorized account, Xiaomi can lock the phone permanently (anti-Rollback status). 4A This risk is minimal, but models newer than the Redmi 5 require an official unlocker.

7. Frequent mistakes and how to avoid them

When you delete a Google account on Redmi 4A, users often face typical problems.

If after all the manipulations the phone still requires the data of the old account, check:

• 🔄 Has two-factor authentication been disabled in Google.
• 📱 Are there any “shadow” accounts in the Settings? → Users.
• 🔧 Are there any third-party applications to block (e.g. Cerberus).

FAQ: Answers to Frequent Questions