Deleting a tied Mi Account via a computer is a challenge that users face when selling a device, resetting settings or fixing sync errors. Unlike mobile devices, where the procedure is intuitive, working through a PC requires knowing the nuances from official Xiaomi tools to workarounds for locked gadgets. This article covers all the current 2026 methods, including deleting through the Mi Unlock Tool, the web interface and third-party utilities, taking into account the latest updates to the brand’s security policy.
Many people mistakenly believe that it is enough to log out of the account in the settings of the smartphone - but this does not remove the binding to the device.-hardware reset (via Fastboot or EDL) The phone may require you to enter the data of the deleted account, even if it was deactivated earlier, and we will discuss how to avoid such blocking and completely untie the device from the profile, including cases when you do not have access to the original password or email.
Note: the deletion procedure is different for devices on MIUI and HyperOS. New models (starting with Xiaomi 13 and Redmi Note 12) use enhanced protection, so some old methods may not work. If your device is released after 2023, be sure to check the section with alternative solutions.
1. Official deletion via the Mi Account website
The safest way is to use Xiaomi’s web interface, which allows you to deactivate your account without the risk of locking your device, which is suitable if you have access to an email/phone linked to your profile and your device is not in Factory Reset Protection (FRP) state.
Go to the account management page: https://account.xiaomi.com and log in. In the security menu, find the option to Delete the account (usually hidden under the tab Additional), the system will request confirmation via SMS or email, a mandatory step to protect against unauthorized deletion.
- 📌 Advantages: does not require a device to connect to a PC, works for all models Xiaomi/Redmi/POCO.
- ⚠️ Limitations: if the account is linked to a device with FRP, After removal, the phone may require a re-authorization at the first turn on.
- 🔄 Execution time: 5-10 minutes (with expectation in mind) SMS-code).
⚠️ Note: After deleting your account through the website, all data synced to Mi Cloud (contacts, notes, photos) will be permanently lost. If you plan to sell the device, pre-backup via Settings → Xiaomi Cloud → Backup.
2. Unlocking via Mi Unlock Tool (to unlock the bootloader)
Mi Unlock Tool is Xiaomi's official utility for bootloader unlocking, but it can also be used to delete an associated account if the device is locked after reset. USB-debugging and on-set mode OEM Unlock in the Developer Settings.
Download the latest version of the utility from the official website: https://en.miui.com/unlock/
Install Xiaomi USB Drivers and connect your phone to your PC in Fastboot mode (press Power + Vol− when the device is off). In the utility, log in under the same account that is linked to the phone and follow the instructions.
Turn on USB-debugging → The phone. → Version. MIUI (7 times to activate the developer mode)
Allow OEM-unlocking in Settings → Additional → For developers
Connect the device to the original PC USB-cable
Install Xiaomi USB Drivers (download from the official website)
-->
⚠️ Note: If the device was purchased from hand and the previous owner did not delete the account, Mi Unlock Tool may show the error "This device is locked by another Mi Account". In this case, you will need to contact Xiaomi support and provide proof of purchase (check, purchase agreement).
| Mistake in Mi Unlock Tool | Reason. | Decision |
|---|---|---|
| Couldn’t unlock | The device is not tied to the account from which the unlock is performed. | Log in under the correct account or reset the link via the website |
| Device is not supported | The device model is not supported by the current version of the utility | Update the Mi Unlock Tool or use alternative methods |
| Waiting for device | Drivers are not installed or the cable is faulty | Reinstall drivers, try another USB-port |
3. Alternative methods: ADB and Fastboot teams
If the official methods did not work, you can try to delete the account through the command line using the ADB It's a method that's suitable for power users and requires you to turn on the device. USB-Important: Incorrect use of commands can lead to complete loss of data or "bricking" of the device.
Connect your phone to your PC, open Command Prompt (or Terminal on macOS/Linux) and execute the following commands in order:
adb shell
pm uninstall -k --user 0 com.xiaomi.account
pm clear com.xiaomi.cloud
rebootIf the device is locked and ADB is not available, try commands in Fastboot mode:
fastboot erase frp
fastboot reboot- 🔧 What models work for: Xiaomi Mi 9/10/11, Redmi Note 8/9/10, POCO F1/F2/F3.
- ❌ Does not work on: HyperOS devices (starting with Xiaomi 13 and later) due to a modified partition structure FRP.
- 🛠️ If the command fails: check if Google drivers are installed USB Drivers for ADB.
What if the fastboot erase frp command doesn't work?
4. Delete account via EDL mode (for advanced)
Regime. EDL (Emergency Download Mode is a service mode that allows you to flash the device at a low level, bypassing locks. FRP And Mi Account. It requires special equipment (EDL-cable or testpoint) and firmware knowledge. EDL Can turn the device into a brick without the possibility of recovery.
To delete an account through EDL, you will need:
- Download the firmware for your model from the Xiaomi Firmware Updater website.
- Install the Mi Flash Tool and Qualcomm HS-USB QDLoader 9008 drivers.
- Put the device into EDL mode (via testpoint or adb reboot edl if ADB is available).
- In the Mi Flash Tool, select the Clean All and Lock option for a full reset.
⚠️ Attention: Firmware through EDL All data will be dropped, including IMEI and the serial number, if you use unofficial firmware, for recovery. IMEI You will need to back up the nvram partition or contact the service center.
💡
Before you run through EDL, check the version of MIUI on your device. If it's newer than the firmware you're going to install, you may have an "Anti Rollback" error blocking the download, which requires you to flash a more recent version or use patched files.
5. Delete account without password: workarounds
If you forget your Mi Account password or you buy a device with someone else's profile attached, the official methods won't work, and there are two options:
- Appeal in support of Xiaomi with proof of purchase (check, box with serial number).
- Use of third-party services (paid, risk of fraud).
Among the verified services for unlocking:
- 🔓 UnlockJunky (works with Redmi and the POCO, guarantee).
⚠️ Warning: Never enter credit card details on dubious sites offering "instant account deletion." Fraudsters often ask for payment for "unlocking code" that doesn't actually exist. Before paying, check reviews on independent forums (for example, check for reviews on independent forums, 4PDA).
6. Frequent errors and their solutions
When you delete a Mi Account, users face typical problems that can be solved without contacting the service, and here is a table of the most common errors and how to fix them.
| Mistake/symptom | Possible cause | Decision |
|---|---|---|
| After deleting the account through the website, the phone still asks for authorization | The account was linked to the device via FRP | Run a reset via Fastboot with the fastboot erase frp team |
| Mi Unlock Tool "Too many attempts, try again after 72 hours" | Exceeded number of attempts to unlock for the account | Wait 72 hours or use another Xiaomi account |
| The device is not defined in Fastboot (waiting for device) | Lack of drivers or faulty USB-cable | Install Google USB Drivers, try another port/cable |
| After firmware through EDL, there is no network (IMEI reset) | The firmware did not contain the nvram partition with the modem data | Restore IMEI through Maui META or contact the service |
If none of the methods worked, check:
- 🔍 Version MIUI/HyperOS: Older teams may not work on new firmware.
- 🔌 Cable and port USB: Use the original cable and port USB 2.0 (port) USB 3.0 can cause errors).
💡
On HyperOS devices (2026), standard ADB or Fastboot deletion methods only work when debugging is enabled before locking, and if the device is already locked, you will need to officially unlock through the Mi Unlock Tool or EDL.