How to remove the headphone sign on the Xiaomi Redmi phone: step-by-step instructions

Did you get your headphones out of the Xiaomi Redmi connector and the icon still burns on the screen? Or does your phone think it's connected when it's long gone? This problem is familiar to many Xiaomi smartphone owners, from the budget Redmi 9A to the flagship Redmi Note 12 Pro+. The reasons can range from banal contamination of the connector to a firmware failure. In this article, we'll look at all the working ways to remove the headphone sign, from simple to radical.

It's important to understand that if the icon appears periodically (for example, after a rain or a phone drop), the problem is more hardware. If the sign hangs constantly and does not disappear even after a reboot, the software is to blame. We will look at solutions for both cases, and also give recommendations on how to avoid recurrence of the problem.

Why is Xiaomi Redmi wearing a headphone icon?

Before you remove the sign, you should understand the reasons for it.

• 🔌 Contaminated or damaged connector – dust, moisture, or mechanical damage to the contacts makes the phone “think” the headphones are connected.
• 🖥️ Failure to work MIUI — Firmware errors or conflicts with applications can lead to false alarm of the sensor.
• 🔄 Incorrect system updates after installing a new version MIUI Sometimes "fly" audio settings.
• 🛠️ Hardware malfunction – damage to the audio chip or contacts on the motherboard (most often after falls or liquid hits).

According to service center statistics, 60 percent of the time, the problem is solved by software (cleaning the connector, rebooting, resetting), the other 40 percent is hardware breakdowns that require repair, and if your Redmi recently fell or got wet, the chances of an iron defect are higher.

Method 1: Rebooting your phone is the easiest solution

Start with the obvious thing: reboot your device, which helps 30 percent of the time, especially if the failure is caused by a temporary conflict in the system.

How to Reboot Xiaomi Redmi correctly:

1. Press the power button for 3-5 seconds.
2. In the menu that appears, select Reboot (or Restart).
3. Wait 1-2 minutes until the phone is completely turned off and re-energized.

If the icon disappeared after the reboot, but then reappeared, the problem lies deeper. If the sign remains, move to the next way.

💡

Some Redmi models (like the Note 10 Pro) have a hard reboot: press Power + Volume up for 10 seconds until the screen goes out. This helps with the system freezes.

Method 2: Cleaning the 3.5mm or USB-C connector

If your Xiaomi Redmi is equipped with a classic 3.5 mm connector (as in the Redmi 9C or Note 8 Pro), the problem may be its contamination. Dust, pile or contact oxidation prevent the phone from correctly determining the connection of headphones. In models with USB-C (for example, Redmi Note 11), the adapter for the headset plays a similar role.

How to clean the connector:

• 🧹 Use a toothpick with cotton wool soaked in alcohol (do not overdo it with liquid!).
• 💨 Blow the connector with compressed air (a canister for cleaning equipment).
• 🔍 Check contacts for corrosion (green plaque) - if any, contact the service.

For USB-C, it's also worth checking the headphone adapter itself -- often the problem is with it. Connect another headset or adapter to rule this out.

Method 3: Resetting the sound settings in MIUI

If physical cleaning didn’t work, try resetting the audio settings, which works when a software-level failure (e.g., after a MIUI update) occurs.

Instructions:

1. Open the Settings. → Sound and vibration.
2. Scroll down and select Reset sound settings (or Reset sound settings).
3. Confirm the action and restart the phone.

After reset, check if the icon has disappeared. If not, move on to more radical measures.

✅ Make sure the headphones are off.

✅ Remember the current volume settings

✅ Check if user sound profiles are used

✅ Reboot your phone after resetting-->

Method 4: Update or roll back the MIUI firmware

Sometimes the headphone sign appears after the MIUI update due to bugs in the new firmware version. For example, Redmi Note 10 users complained about this problem massively after the release of MIUI 13.0.4. In such cases, either updating to a newer version or rolling back to a stable one helps.

How to update firmware:

1. Go to Settings → About Phone → Update MIUI.
2. Click Check Updates and install the available version.
3. After installation, restart the phone.

If the update didn't work or the new version didn't, try rolling back to the previous firmware.

• 📥 Download the stable version MIUI For your model from the official Xiaomi website.
• 🔧 Use Fastboot or Recovery to install (instructions are available on the forums) 4PDA or XDA Developers).

Attention: rolling back firmware may cause data loss! make a backup through Settings → Additional → Backup.

Method 5: Complete reset (Hard Reset)

If all previous methods failed, the last resort is to completely reset the phone to factory settings, which will delete all data, but return the system to its original state, eliminating software failures.

How to make a Hard Reset:

1. Create a backup of important data (photos, contacts, messages).
2. Go to Settings → About the phone → Reset settings.
3. Choose to erase all data and confirm the action.
4. After resetting, set up the phone as new.

If the headphone icon disappeared, the problem was the software. If it didn't, it was probably a hardware malfunction (an audio chip or connector damaged).

💡

Before reset, check if the headphone sign is associated with a particular app. For example, some versions of Spotify or YouTube Music may cause a false sensor alarm.

What do you do if nothing helps?

If neither of these methods has removed the icon, there are two options:

1. Contact the service center — the masters will check the audio chip, connector and motherboard for damage. The average cost of diagnosis is 500-1000 rubles.
2. Disable the display of the icon (if it does not interfere with the work).

• 📱 Install custom firmware (e.g. Pixel Experience) where you can configure the display of icons in the status bar.
• 🛠️ Use applications like SystemUI Tuner (root rights required).

If the phone is warranty, do not risk with firmware - it is better to immediately bring to the service. Self-repair can deprive you of warranty service.

💡

Before visiting the service, take a picture of the headphone icon and record the phone model (Settings → About Phone → Model).

How to avoid recurrence of the problem?

To ensure that the icon of headphones does not appear anymore, follow the simple rules:

• 🚫 Do not pull the headphones out of the jack abruptly – this can damage the contacts.
• 🌧️ Avoid getting moisture into the connector (use covers with water protection).
• 🔄 Update regularly MIUI, But don't install betas unless you're ready for bugs.
• 🧼 Clean the dust connector once every 2-3 months.

If you often use a headset, consider the option with wireless headphones - this will completely eliminate problems with the connector.

FAQ: Frequent questions about the headphone sign on Xiaomi Redmi