How to remove parental control on Xiaomi: all ways of 2026

Parental controls on Xiaomi are a useful feature to limit children’s access to content, but sometimes it becomes a problem for device owners: Have you forgotten your password, bought a used phone with activated restrictions or experienced a software failure? In this article, we will discuss all the current ways to disable parental control on Redmi, POCO and other models running MIUI 12-15.

It's important to understand that the methods vary depending on how you set up control, whether it's through built-in MIUI settings, Google Family Link, or third-party programs like Kids Place. We'll look at each case separately, taking into account the nuances of firmware and models. If you're not sure about your actions, factory resets are the last option, because it will delete all data from the device.

Before you start, check:

  • πŸ” Do you know the password from the Mi Account linked to the phone?
  • πŸ“± Do you have a backup of important data (photos, contacts, messages)?
  • πŸ”§ What version? MIUI set (you can find out in the settings) β†’ The phone)?
πŸ“Š What kind of smartphone you Xiaomi?
Redmi Note 10/11/12
POCO X3/X4/X5
Mi 11/12/13
Another Xiaomi
Not Xiaomi.

1. disable parental control through MIUI settings

If the restrictions were set through standard MIUI settings, the easiest way is to use the system menu, which works on most Xiaomi, Redmi, and POCO devices with the MIUI 12-15 firmware version.

Instructions:

  1. Open Settings β†’ Applications β†’ Parental Controls.
  2. Enter your current PIN or password (if you forgot, see Section 3).
  3. Go to Restrictions Management and disable all active functions.
  4. Confirm the action by clicking Save.

If there is no β€œParental Control” option on the menu, try an alternative route:

  • πŸ”„ Settings β†’ System and device β†’ Additionally. β†’ Parental control (for the purpose of MIUI 14+).
  • πŸ”„ Settings β†’ Accounts and synchronization β†’ Family (if the control is linked to the Mi Account).

Battery charge > 50% | Wi-Fi/mobile connection | Password from Mi Account at hand | Data backup (optional)

-->

⚠️ Note: Some models (e.g. Redmi Note 12 Pro)+) After disabling control, you may need to restart your device. If the restrictions remain after the changes, check the settings in the Google Play Store. β†’ Settings β†’ Family control.

2. reset the password of parental control through Mi Account

Forgot your PIN or password from parental control? If your device is tied to your Mi Account, you can restore access through Xiaomi's official service, which only works when you have an active Internet connection and remember your account data.

Step-by-step:

  1. Go to account.xiaomi.com from another device.
  2. Sign in with the same account as on your phone.
  3. Choose Device Management β†’ [your Xiaomi model].
  4. Find the Parental Controls section and click Reset Password.
  5. Follow the instructions on the screen (confirmation via SMS or email may be required).

After discharge:

  • πŸ“± On the phone will appear a notification about changing the password.
  • πŸ”‘ Go to the parental control settings and enter a new PIN.
  • βš™οΈ Turn off all restrictions.
Xiaomi modelSupport for resetting through Mi AccountNotes
Redmi Note 10/11/12βœ… Yes.The latest version of MIUI is required
POCO X3/X4/X5βœ… Yes.You may need to update your firmware
Mi 11/12/13βœ… Yes.It works without additional actions
Xiaomi Pad 5/6⚠️ Partially.Only control through the Mi Account

⚠️ Note: If the device was purchased from hand and the previous owner did not untie his Mi Account, the reset of the password of parental controls can be blocked).

πŸ’‘

If the Mi Account site makes an error when resetting your password, try clearing your browser cache or using another one (e.g. Chrome in incognito mode).

3. bypassing parental controls through safe mode

If standard methods don’t work, you can try to disable restrictions through Safe Mode, which is suitable for cases where control is set by a third-party application (such as Kids Place or AppLock), rather than through the MIUI system settings.

How to start safe mode:

  1. Press the power button before the turn off menu appears.
  2. Hold your finger at the switch off (or power off) for 3-5 seconds.
  3. There will be an offer to go to Safe Mode - confirm.

In safe mode:

  • πŸ”§ Remove the Parental Controls App through Settings β†’ Annexes.
  • πŸ”„ Restart the device (Safe mode will shut down automatically).
  • βš™οΈ Check if there are any restrictions.
What to do if the safe mode is not started?
On some Xiaomi models (e.g. Redmi 9A or POCO M3), the safe mode is activated differently: Turn off the phone. Press the Power and Volume button at the same time. Hold until the MI logo appears, then let go. If that doesn't work, try connecting the device to your PC and using ADB (see section 4).

Limitations of the method:

  • ❌ It does not work for built-in parental controls. MIUI.
  • ❌ Some apps (like Google Family Link) are blocked at the system level and not removed in Safe Mode.

4. Removal of parental controls via ADB (for advanced users)

If previous methods didn’t work, you can use Android Debug Bridge (ADB), a tool for debugging Android devices, which requires connecting the phone to a computer and basic command line knowledge.

What you need:

  • πŸ–₯️ Computer with Windows/macOS/Linux.
  • πŸ”Œ USB-cable (preferably original).li>
  • πŸ“¦ Installed drivers Xiaomi and ADB (You can download from the official website).

Instructions:

  1. Turn on Developer Mode on your phone: Go to Settings β†’ About Phone. Tap 7 times on MIUI Version. Go back to Settings β†’ Additional β†’ Developer. Activate USB Debugging.

cmd

Terminal

adb devices

(Your device should appear)

adb shell pm uninstall -k --user 0 com.miui.guardprovider

(Parental Controls App will be removed)

adb shell pm clear com.android.providers.settings

(Resets the restrictions settings)

⚠️ Attention: Misuse of the right ADB If you are not sure about your actions, skip this method and proceed to resetting (section 5).

πŸ’‘

ADB-If you have a device unauthorized error when you enter commands, confirm the debugging on your phone screen.

5. Complete reset to factory settings (extreme case)

If none of these methods work, you have to reset your phone back to factory settings, which will delete all the data (photos, apps, contacts), so only use it as a last resort.

How to reset your settings:

  1. Backup important data (if the phone allows).
  2. Go to Settings β†’ About the phone β†’ Reset settings.
  3. Choose Delete all data and confirm the action.
  4. After restarting, set your phone as new.
  5. πŸ”§ Reset the settings of Google Play Market: Settings β†’ Annexes β†’ Google Play Store β†’ Warehouse β†’ Clear the data

Self-detachment bypassing the binding can lead to a complete locking of the device!