The situation where a user forgets the access code to their smartphone is ubiquitous, and owners of Xiaomi devices are no exception: A forgotten pattern lock or digital key. PIN-The code can turn a gadget into a useless piece of plastic and glass, blocking access to contacts, photos and banking applications. MIUI HyperOS, or HyperOS, is designed to make unauthorized access as difficult as possible, which often plays a cruel joke with forgetful hosts.
There are several proven ways to remove the password from the Xiaomi phone, but their effectiveness depends on what settings were activated earlier and whether the user remembers data from the Mi Account or Google account. It is important to understand that in most cases, if you do not know the current unlock code, the only way out is a complete reset of the device to factory settings. Recovery Mode (Recovery) is guaranteed to delete all user data, including photos, contacts and applications, if you did not previously enable synchronization.
In this article, we will take a look at all possible scenarios, from regular shutdowns via the settings menu to emergency unlock methods through your computer and special service utilities. We will look at the nuances of working with your Mi Account, explain why you may need to Internet after a reset, and give clear instructions for each model, whether it is a budget Redmi or flagship Xiaomi.
Staff disabling password through system settings
If you remember the current access code or you have the option to unlock the screen, the easiest and safest way is to turn off the protection in the settings menu. This method does not require a connection to the computer and saves all your data intact. First, you need to enter the Settings section, which is usually represented by a gear on the home screen or in the notification curtain.
Then the algorithm of actions depends on the version of the operating system, but the general logic remains the same. You need to find the security item. MIUI 14 and HyperOS paths are often as follows: Passwords and security -> Device protection. This shows the current way you unlock, whether it's a pattern lock, PIN-code.
⚠️ Note: Before disabling the password, the system will necessarily require you to enter the current unlock code or confirm the action through your fingerprint / face.
Once you log into the password management menu, you'll see a list of active methods. Click on the active lock type (e.g., "Block Screen"). The system will suggest options: change the password or disable it. Select the "Disable" option. You'll have to enter the current ID code again, and then the protection will be removed, and the phone will be unlocked by a simple swipe.
📊 What type of lock you use most often?
pattern lock
Digital. PIN-code
A complex password
Fingerprint/Face ID
It is worth noting that on some devices with enabled encryption, complete deletion of the password may not be possible without resetting. In such cases, the system will only offer changing the code to a simpler one, for example, from digital to graphical. If your goal is to completely remove protection, and the system insists on having at least one method, you will have to resort to more radical measures, described below.
Reset via Mi Account and the "Find Device" function
Xiaomi smartphone owners have a unique advantage in the Mi Account ecosystem. If a locked phone has logged in to a Mi Account and enabled the Find Device function, it is possible to remotely reset the screen lock password. This method only works if there is an active Internet connection on the smartphone (Wi-Fi or mobile data).
To do this, you'll need a computer or other smartphone, go to the official i.mi.com website and log in using the same Mi Account that's linked to the locked device. After successfully logging in to the web interface, select Find Device.
The service interface will display a map and a list of your devices. Select the smartphone you want from the list. In the device management menu, find the Lock button or Remove Lock button. Pressing this button will send a command to the phone that will force you to remove the current screen password. The process can take anywhere from 10 seconds to several minutes depending on the network speed.
- 🔑 Accuracy of data: Make sure to enter the username and password from Mi Account without errors, otherwise login to the service will not be possible.
- 📶 Network requirement: If the phone is turned off or in flight mode, the command will not be executed until the connection appears.
- 🔄 Synchronization: Once the password is removed, it is recommended to back up the data immediately, as access to the device is now open.
It's important to understand the difference between this method and a full reset. Removing locks through Mi Cloud doesn't erase your photos or contacts, it just removes the lock from the screen. However, if Find Device wasn't activated in advance, it won't work.
What to do if you forget your Mi Account password?
If you don’t remember the password from your Mi Account, you can restore it through the login page using the linked phone number or email. Go to the link “Forgot your password?” on the login screen and follow the system’s instructions for resetting credentials. An alternative option for devices where Mi Account is not configured, but login to a Google account is active, is the service "Find My Device" from Google. The principle of operation is similar to the cloud service Xiaomi, but has its own features and limitations, depending on the Android version and security settings. android.com/find From any browser. Log in to the Google account that is the main one on the locked phone. If the device is online and geolocated, you will see its location. From the action menu, select the option to Clear the device (Erase Device). The main difference here is that Google typically can't just "remove" the password, it initiates a complete reset of the phone to factory settings. This means that all data will be deleted. However, this is the only way to return access to the phone if other methods do not work, and the data on Google's cloud servers (contacts, notes) will be partially saved and synchized after a new setup. Instantly, if you have a network, Google Find My Device Data Save (refilation) No (complete reset) The Internet Demand is bound to require that the phone will be re-requested as soon as the Google Account will be re-cleared, as the process will start re-up from Google Account, as soon as the server will re-clearing the account, as the account will re-upload it will start the account, as the Google account will re-clearance process of the Google account, the account will re-clearance of the Google account, the account will start. You will need to go through the initial setup, connect to Wi-Fi and enter Google account data to confirm ownership (FRP protection). Password reset via Recovery Mode (Hard Reset) The most versatile method that works even without the Internet and preset cloud services is reset via Recovery Mode. This method is available on all models of Xiaomi, Redmi and POCO, regardless of the state of the system. To enter Recovery mode, you need to completely turn off the smartphone. Then simultaneously press the Volume Up button (+) and the menu is controlled until the menu is louder is opened, you can keep the menu from the menu. ☑️ Preparing for Hard Reset Charge the phone to a minimum 30%Extract SIM-Map and memory card (recommended)Remember Google Account DataAware of the loss of all data: 0 / 4 From the Recovery menu, select the language (if you have a choice) and go to Wipe Data or Wipe Data. Next, select Wipe All Data. The system will warn you of irreversibility of actions. Confirm the action by choosing Confirm or OK. There will be a formatting process that can take place from 10 seconds. ⚠️ Warning: After rebooting, the phone will require you to enter a password from a Google account or Mi Account that was synced to the device before reset.This is anti-theft protection (FRP), If you forget your password and your Google account, things get complicated, and you may need specialized tools to get around it. FRP, What is beyond the standard instructions. Therefore, it is extremely important to remember your account details. ADB and debugging USB There is a more technically sophisticated method that allows you to delete a file with passwords without losing data, but it works only under one condition: the phone has been pre-enabled. USB (USB Debugging) and the computer was already authorized for this device, and if you didn't include this feature in the Developer Menu, this is not the right way to do it. ADB Minimum set of tools ADB. Connect your phone to your PC with a cable. Open the command line (CMD) or PowerShell in a folder with ADB and enter the command to check the connection: adb devices If the list appeared device with the status of device, then the connection is established. Next, you need to enter a command to delete the file that stores the access keys: adb shell rm /data/system/gesture.key Or if you were using digital PIN: adb shell rm /data/system/password.key Once you've done the command, reboot your phone. The lock screen should disappear, or you can enter any password you accept.This method is effective on older versions of Android, while newer versions are. MIUI Android 11/12/13/14 have enhanced security, making this file inaccessible even with rights ADB No root rights. FRP (Google Lock and its solution After any forced reset (Hard Reset) on Android devices 5.1 and above activate the protection mechanism FRP (Factory Reset Protection means that when you first download the phone will require you to enter the username and password from the Google account that was synced to the device before the reset. This is to prevent the thief who stole the phone from simply dumping it and using it as a new one, and if you are the legal owner but don't remember the password, you will have to use the procedure to restore access to your Google account through a browser on another device. In some cases, if your Google account has been deleted from your phone’s settings before the reset (via the Settings menu -> Accounts -> Delete your account, and you won't get a password request after Hard Reset. FRP when preparing the phone for sale. 🔒 Mi-account: Xiaomi phones also have similar protection through Mi Account.If the phone was tied, you will need to sign in to Mi-account. 📡 Network Necessity: To verify a password, the phone must be connected to the Internet (Wi-Fi or Wi-Fi). SIM-map). 🛑 Blocking: After several failed password attempts, the account may be temporarily blocked for 24 hours. ⚠️ Attention: Attempts to circumvent FRP Using unofficial software, exploits or paid services, "unlocking" can lead to a complete locking of the device. IMEI Or you can use firmware resolution. 💡The only guaranteed way to avoid problems with FRP — remember your Google account and Mi Account details, and delete accounts from settings before selling or resetting your phone. Frequently asked questions (FAQ) Can you unlock Xiaomi without losing your password? Without pre-setting cloud services (Mi Cloud or Google) and enabling remote management — almost impossible on modern versions of Android. The only working method is a complete reset that deletes all data. What if the phone says "Device locked" after reset? FRP. You need to enter the Google account that was on the phone before the reset. If you don't remember it, use password recovery on Google. Will the button reset work if the phone is turned off? Yes, Recovery mode works regardless of the system's state. The main thing is that the battery is charged at least on 10-15%, So the phone doesn't turn off during the firmware or reset process. SD-When you reset your card with a password, the internal memory is completely cleared. SD-The card is not usually formatted, but for data security, it is recommended to remove it before starting any operations with recovery? Official service centers can perform a reset, but they also cannot save your data without a password, and the service can be paid if the device is not warranty or has no obvious hardware defects.